/*
 * Copyright (c) 2018 Linaro Limited
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <st/f4/stm32f446Xe.dtsi>

/ {
	model = "STMicroelectronics 96Boards STM32 Sensor Mezzanine board";
	compatible = "st,stm32f446-b96b-f446ve", "st,stm32f446";

	chosen {
		zephyr,console = &uart4;
		zephyr,shell-uart = &uart4;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
	};

	leds {
		compatible = "gpio-leds";
		red_led_0: led_0 {
			gpios = <&gpiod 10 GPIO_INT_ACTIVE_HIGH>;
			label = "User LD0";
		};
		green_led_1: led_1 {
			gpios = <&gpiod 11 GPIO_INT_ACTIVE_HIGH>;
			label = "User LD1";
		};
		blue_led_2: led_2 {
			gpios = <&gpiod 12 GPIO_INT_ACTIVE_HIGH>;
			label = "User LD2";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button: button {
			label = "Key";
			gpios = <&gpiod 13 GPIO_INT_ACTIVE_LOW>;
		};
	};

	aliases {
		led0 = &red_led_0;
		led1 = &green_led_1;
		led2 = &blue_led_2;
		sw0 = &user_button;
	};
};

&i2s2 {
	status = "ok";

	mp34dt01@0 {
		compatible = "st,mpxxdtyy";
		reg = <0>;
		label = "MP34DT01";
	};
};

&i2c1 {
	status = "ok";
	clock-frequency = <I2C_BITRATE_FAST>;

	/* ST Microelectronics LIS3MDL magnetic field sensor */
	lis3mdl-magn@1e {
		compatible = "st,lis3mdl-magn";
		reg = <0x1e>;
		label = "LIS3MDL";
	};

	/* ST Microelectronics LPS22HB pressure sensor */
	lps22hb-press@5d {
		compatible = "st,lps22hb-press";
		reg = <0x5d>;
		label = "LPS22HB";
	};
};

&i2c2 {
	status = "ok";
	clock-frequency = <I2C_BITRATE_FAST>;
};

&i2s2 {
	status = "ok";
};

&spi1 {
	status = "ok";
};

&spi2 {
	status = "ok";
};

&timers3 {
	status = "ok";

	pwm {
		status = "ok";
	};
};

&timers4 {
	status = "ok";

	pwm {
		status = "ok";
	};
};

&timers9 {
	status = "ok";

	pwm {
		status = "ok";
	};
};

&usart1 {
	current-speed = <115200>;
	pinctrl-0 = <&usart1_pins_b>;
	pinctrl-names = "default";
	status = "ok";
};

&usart2 {
	current-speed = <115200>;
	pinctrl-0 = <&usart2_pins_a>;
	pinctrl-names = "default";
	status = "ok";
};

&uart4 {
	current-speed = <115200>;
	pinctrl-0 = <&uart4_pins_b>;
	pinctrl-names = "default";
	status = "ok";
};

&rtc {
	status = "ok";
};