/*
 * Copyright (c) 2023 Nuvoton Technology Corporation.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#define DT_DRV_COMPAT nuvoton_numaker_gpio

#include <zephyr/kernel.h>
#include <zephyr/device.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/clock_control.h>
#include <zephyr/drivers/clock_control/clock_control_numaker.h>
#include <zephyr/drivers/gpio/gpio_utils.h>
#include <zephyr/logging/log.h>
#include <NuMicro.h>

#define NU_MFP_POS(pinindex) ((pinindex % 4) * 8)

LOG_MODULE_REGISTER(gpio_numaker, LOG_LEVEL_ERR);

struct gpio_numaker_config {
	struct gpio_driver_config common;
	uint32_t reg;
	uint32_t gpa_base;
	uint32_t size;
	uint32_t clk_modidx;
	const struct device *clk_dev;
};

struct gpio_numaker_data {
	struct gpio_driver_data common;
	sys_slist_t callbacks;
};

static int gpio_numaker_configure(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags)
{
	const struct gpio_numaker_config *config = dev->config;
	struct gpio_numaker_data *data = dev->data;
	GPIO_T *gpio_base = (GPIO_T *)config->reg;
	uint32_t pinMfpMask = (0x1f << NU_MFP_POS(pin));
	uint32_t pinMask = BIT(pin); /* mask for pin index --> (0x01 << pin) */
	uint32_t port_index;
	uint32_t *GPx_MFPx;
	uint32_t pinMfpGpio;
	int err = 0;

	ARG_UNUSED(data);

	/* Check for an invalid pin number */
	if (pin > 15) {
		return -EINVAL;
	}

	/* Configure GPIO direction */
	switch (flags & GPIO_DIR_MASK) {
	case GPIO_INPUT:
		GPIO_SetMode(gpio_base, pinMask, GPIO_MODE_INPUT);
		break;
	case GPIO_OUTPUT:
		GPIO_SetMode(gpio_base, pinMask, GPIO_MODE_OUTPUT);
		break;
	case (GPIO_INPUT | GPIO_OUTPUT):
		GPIO_SetMode(gpio_base, pinMask, GPIO_MODE_QUASI);
		break;
	default:
		err = -ENOTSUP;
		goto move_exit;
	}

	if (flags & GPIO_LINE_OPEN_DRAIN) {
		GPIO_SetMode(gpio_base, pinMask, GPIO_MODE_OPEN_DRAIN);
	}

	/* Set Multi-function, default is GPIO */
	port_index = (config->reg - config->gpa_base) / config->size;
	GPx_MFPx = ((uint32_t *)&SYS->GPA_MFP0) + port_index * 4 + (pin / 4);
	pinMfpGpio = 0x00UL;
	/*
	 * E.g.: SYS->GPA_MFP0  = (SYS->GPA_MFP0 & (~SYS_GPA_MFP0_PA0MFP_Msk) ) |
	 * SYS_GPA_MFP0_PA0MFP_GPIO;
	 */
	*GPx_MFPx = (*GPx_MFPx & (~pinMfpMask)) | pinMfpGpio;

	/* Set pull control as pull-up, pull-down or pull-disable */
	if ((flags & GPIO_PULL_UP) != 0) {
		GPIO_SetPullCtl(gpio_base, pinMask, GPIO_PUSEL_PULL_UP);
	} else if ((flags & GPIO_PULL_DOWN) != 0) {
		GPIO_SetPullCtl(gpio_base, pinMask, GPIO_PUSEL_PULL_DOWN);
	} else {
		GPIO_SetPullCtl(gpio_base, pinMask, GPIO_PUSEL_DISABLE);
	}

	/* Set Init Level 0:low 1:high */
	if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0) {
		gpio_base->DOUT |= pinMask;
	} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0) {
		gpio_base->DOUT &= ~pinMask;
	}

move_exit:
	return err;
}

static int gpio_numaker_port_get_raw(const struct device *dev, uint32_t *value)
{
	const struct gpio_numaker_config *config = dev->config;
	GPIO_T *gpio_base = (GPIO_T *)config->reg;

	/* Get raw bits of GPIO PIN data */
	*value = gpio_base->PIN;

	return 0;
}

static int gpio_numaker_port_set_masked_raw(const struct device *dev, uint32_t mask, uint32_t value)
{
	const struct gpio_numaker_config *config = dev->config;
	GPIO_T *gpio_base = (GPIO_T *)config->reg;

	gpio_base->DOUT = (gpio_base->DOUT & ~mask) | (mask & value);

	return 0;
}

static int gpio_numaker_port_set_bits_raw(const struct device *dev, uint32_t mask)
{
	const struct gpio_numaker_config *config = dev->config;
	GPIO_T *gpio_base = (GPIO_T *)config->reg;

	/* Set raw bits of GPIO output data */
	gpio_base->DOUT |= mask;

	return 0;
}

static int gpio_numaker_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t mask)
{
	const struct gpio_numaker_config *config = dev->config;
	GPIO_T *gpio_base = (GPIO_T *)config->reg;

	/* Clear raw bits of GPIO data */
	gpio_base->DOUT &= ~mask;

	return 0;
}

static int gpio_numaker_port_toggle_bits(const struct device *dev, gpio_port_pins_t mask)
{
	const struct gpio_numaker_config *config = dev->config;
	GPIO_T *gpio_base = (GPIO_T *)config->reg;

	/* Toggle raw bits of GPIO data */
	gpio_base->DOUT ^= mask;

	return 0;
}

static int gpio_numaker_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin,
						enum gpio_int_mode mode, enum gpio_int_trig trig)
{
	const struct gpio_numaker_config *config = dev->config;
	GPIO_T *gpio_base = (GPIO_T *)config->reg;
	uint32_t intAttr;

	if (mode == GPIO_INT_MODE_DISABLED) {
		GPIO_DisableInt(gpio_base, pin);
		/* Clear the port int status */
		gpio_base->INTSRC &= BIT(pin);
	} else {
		switch (trig) {
		case GPIO_INT_TRIG_LOW:
			intAttr = ((mode == GPIO_INT_MODE_EDGE) ? GPIO_INT_FALLING : GPIO_INT_LOW);
			break;
		case GPIO_INT_TRIG_HIGH:
			intAttr = ((mode == GPIO_INT_MODE_EDGE) ? GPIO_INT_RISING : GPIO_INT_HIGH);
			break;
		case GPIO_INT_TRIG_BOTH:
			if (mode != GPIO_INT_MODE_EDGE) {
				return -ENOTSUP;
			}
			intAttr = GPIO_INT_BOTH_EDGE;
			break;
		default:
			return -ENOTSUP;
		}
		GPIO_EnableInt(gpio_base, pin, intAttr);
	}

	return 0;
}

static int gpio_numaker_manage_callback(const struct device *dev, struct gpio_callback *callback,
					bool set)
{
	struct gpio_numaker_data *data = dev->data;

	return gpio_manage_callback(&data->callbacks, callback, set);
}

static DEVICE_API(gpio, gpio_numaker_api) = {
	.pin_configure = gpio_numaker_configure,
	.port_get_raw = gpio_numaker_port_get_raw,
	.port_set_masked_raw = gpio_numaker_port_set_masked_raw,
	.port_set_bits_raw = gpio_numaker_port_set_bits_raw,
	.port_clear_bits_raw = gpio_numaker_port_clear_bits_raw,
	.port_toggle_bits = gpio_numaker_port_toggle_bits,
	.pin_interrupt_configure = gpio_numaker_pin_interrupt_configure,
	.manage_callback = gpio_numaker_manage_callback};

static void gpio_numaker_isr(const struct device *dev)
{
	const struct gpio_numaker_config *config = dev->config;
	struct gpio_numaker_data *data = dev->data;
	GPIO_T *gpio_base = (GPIO_T *)config->reg;
	uint32_t int_status;

	/* Get the int status  */
	int_status = gpio_base->INTSRC;

	/* Clear the port int status */
	gpio_base->INTSRC = int_status;

	gpio_fire_callbacks(&data->callbacks, dev, int_status);
}

#define CLOCK_CTRL_INIT(n) .clk_dev = DEVICE_DT_GET(DT_PARENT(DT_INST_CLOCKS_CTLR(n))),

#define GPIO_NUMAKER_IRQ_INIT(n)                                                                   \
	do {                                                                                       \
		IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), gpio_numaker_isr,           \
			    DEVICE_DT_INST_GET(n), 0);                                             \
                                                                                                   \
		irq_enable(DT_INST_IRQN(n));                                                       \
	} while (0)

#define GPIO_NUMAKER_DEFINE(n)                                                                     \
	static const struct gpio_numaker_config gpio_numaker_config##n = {                         \
		.common = {                                                                        \
				.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n),               \
			},                                                                         \
		.reg = DT_INST_REG_ADDR(n),                                                        \
		.gpa_base = DT_REG_ADDR(DT_NODELABEL(gpioa)),                                      \
		.size = DT_REG_SIZE(DT_NODELABEL(gpioa)),                                          \
		.clk_modidx = DT_INST_CLOCKS_CELL(n, clock_module_index),                          \
		CLOCK_CTRL_INIT(n)};                                                               \
                                                                                                   \
	static struct gpio_numaker_data gpio_numaker_data##n;                                      \
                                                                                                   \
	static int gpio_numaker_init##n(const struct device *dev)                                  \
	{                                                                                          \
		const struct gpio_numaker_config *config = dev->config;                            \
		struct numaker_scc_subsys scc_subsys;                                              \
		int err;                                                                           \
                                                                                                   \
		SYS_UnlockReg();                                                                   \
		memset(&scc_subsys, 0x00, sizeof(scc_subsys));                                     \
		scc_subsys.subsys_id = NUMAKER_SCC_SUBSYS_ID_PCC;                                  \
		scc_subsys.pcc.clk_modidx = config->clk_modidx;                                    \
		err = clock_control_on(config->clk_dev, (clock_control_subsys_t)&scc_subsys);      \
		if (err == 0) {                                                                    \
			IF_ENABLED(DT_INST_IRQ_HAS_IDX(n, 0), (GPIO_NUMAKER_IRQ_INIT(n);))         \
		}                                                                                  \
                                                                                                   \
		SYS_LockReg();                                                                     \
		return err;                                                                        \
	}                                                                                          \
	DEVICE_DT_INST_DEFINE(n, gpio_numaker_init##n, NULL, &gpio_numaker_data##n,                \
			      &gpio_numaker_config##n, PRE_KERNEL_1, CONFIG_GPIO_INIT_PRIORITY,    \
			      &gpio_numaker_api);

DT_INST_FOREACH_STATUS_OKAY(GPIO_NUMAKER_DEFINE)