dts: nxp: Fix opamp addresses
The opamp addresses were wrong given the ranges translations.
This resulted in using the NS addresses on a S build.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
diff --git a/dts/arm/nxp/nxp_lpc55S3x_common.dtsi b/dts/arm/nxp/nxp_lpc55S3x_common.dtsi
index 72d9e2a..ac58013 100644
--- a/dts/arm/nxp/nxp_lpc55S3x_common.dtsi
+++ b/dts/arm/nxp/nxp_lpc55S3x_common.dtsi
@@ -312,27 +312,27 @@
clocks = <&syscon MCUX_LPADC1_CLK>;
};
- opamp0: opamp@400b4000 {
+ opamp0: opamp@b4000 {
compatible = "nxp,opamp";
- reg = <0x400b4000 0x1000>;
+ reg = <0xb4000 0x1000>;
status = "disabled";
operation-mode = "low_noise";
clocks = <&syscon MCUX_OPAMP0_CLK>;
resets = <&reset NXP_SYSCON_RESET(3, 12)>;
};
- opamp1: opamp@400b8000 {
+ opamp1: opamp@b8000 {
compatible = "nxp,opamp";
- reg = <0x400b8000 0x1000>;
+ reg = <0xb8000 0x1000>;
status = "disabled";
operation-mode = "low_noise";
clocks = <&syscon MCUX_OPAMP1_CLK>;
resets = <&reset NXP_SYSCON_RESET(3, 13)>;
};
- opamp2: opamp@400bb000 {
+ opamp2: opamp@bb000 {
compatible = "nxp,opamp";
- reg = <0x400bb000 0x1000>;
+ reg = <0xbb000 0x1000>;
status = "disabled";
operation-mode = "low_noise";
clocks = <&syscon MCUX_OPAMP2_CLK>;
diff --git a/dts/arm/nxp/nxp_mcxn94x_common.dtsi b/dts/arm/nxp/nxp_mcxn94x_common.dtsi
index a1525ff..258d2fb 100644
--- a/dts/arm/nxp/nxp_mcxn94x_common.dtsi
+++ b/dts/arm/nxp/nxp_mcxn94x_common.dtsi
@@ -81,15 +81,15 @@
#io-channel-cells = <2>;
};
- opamp0: opamp@40110000 {
+ opamp0: opamp@110000 {
compatible = "nxp,opamp";
- reg = <0x40110000 0x1000>;
+ reg = <0x110000 0x1000>;
status = "disabled";
operation-mode = "low_noise";
clocks = <&syscon MCUX_OPAMP0_CLK>;
};
- opamp1: opamp@40113000 {
+ opamp1: opamp@113000 {
compatible = "nxp,opamp";
reg = <0x40113000 0x1000>;
status = "disabled";
@@ -97,9 +97,9 @@
clocks = <&syscon MCUX_OPAMP1_CLK>;
};
- opamp2: opamp@40115000 {
+ opamp2: opamp@115000 {
compatible = "nxp,opamp";
- reg = <0x40115000 0x1000>;
+ reg = <0x115000 0x1000>;
status = "disabled";
operation-mode = "low_noise";
clocks = <&syscon MCUX_OPAMP2_CLK>;
