| # Copyright (c) 2020 Micro:bit Educational Foundation |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| description: | |
| GPIO pins exposed on BBC MicroBit headers. |
| |
| The edge connector on the micro:bit is used to connect to external |
| circuits and components. |
| |
| There are 25 strips/pins including 5 rings for using with 4mm banana |
| plugs or crocodile clips. 3 of these rings are for general purpose |
| input and output (GPIO) and are also capable of analog, PWM and touch |
| sensing, and two are connected to the micro:bit power supply. |
| |
| The smaller strips spaced at 1.27mm on the edge connector have additional |
| signals, some of which are used by the micro:bit, and others that are free |
| for you to use. There are a number of external PCB connectors for purchase |
| with an 80w 1.27mm pitch that can be used to easily access these extra pins. |
| |
| Only the pins on the front are connected to signals. The back rings are |
| connected to the front rings, but the back small strips are unconnected. |
| |
| Pin assignments can be found at: |
| https://tech.microbit.org/hardware/edgeconnector/#edge-connector-pins |
| |
| compatible: "microbit,edge-connector" |
| |
| include: [gpio-nexus.yaml, base.yaml] |
