/*
 * Copyright (c) 2020 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/**
 * @file
 * @defgroup bt_mesh_dfu_cli Firmware Uppdate Client model
 * @ingroup bt_mesh_dfu
 * @{
 * @brief API for the Bluetooth mesh Firmware Update Client model
 */

#ifndef ZEPHYR_INCLUDE_BLUETOOTH_MESH_DFU_CLI_H__
#define ZEPHYR_INCLUDE_BLUETOOTH_MESH_DFU_CLI_H__

#include <zephyr/bluetooth/mesh/access.h>
#include <zephyr/bluetooth/mesh/blob_cli.h>
#include <zephyr/bluetooth/mesh/dfu.h>

#ifdef __cplusplus
extern "C" {
#endif

struct bt_mesh_dfu_cli;

/**
 *
 *  @brief Initialization parameters for the @ref bt_mesh_dfu_cli.
 *
 *  @sa bt_mesh_dfu_cli_cb.
 *
 *  @param _handlers Handler callback structure.
 */
#define BT_MESH_DFU_CLI_INIT(_handlers)                                        \
	{                                                                      \
		.cb = _handlers,                                               \
		.blob = { .cb = &_bt_mesh_dfu_cli_blob_handlers },             \
	}

/**
 *
 *  @brief Firmware Update Client model Composition Data entry.
 *
 *  @param _cli Pointer to a @ref bt_mesh_dfu_cli instance.
 */
#define BT_MESH_MODEL_DFU_CLI(_cli)                                            \
	BT_MESH_MODEL_BLOB_CLI(&(_cli)->blob),                                 \
	BT_MESH_MODEL_CB(BT_MESH_MODEL_ID_DFU_CLI, _bt_mesh_dfu_cli_op, NULL,  \
			 _cli, &_bt_mesh_dfu_cli_cb)

/** DFU Target node. */
struct bt_mesh_dfu_target {
	/** BLOB Target node */
	struct bt_mesh_blob_target blob;
	/** Image index on the Target node */
	uint8_t img_idx;
	/** Expected DFU effect, see @ref bt_mesh_dfu_effect. */
	uint8_t effect;
	/** Current DFU status, see @ref bt_mesh_dfu_status. */
	uint8_t status;
	/** Current DFU phase, see @ref bt_mesh_dfu_phase. */
	uint8_t phase;
};

/** Metadata status response. */
struct bt_mesh_dfu_metadata_status {
	/** Image index. */
	uint8_t idx;
	/** Status code. */
	enum bt_mesh_dfu_status status;
	/** Effect of transfer. */
	enum bt_mesh_dfu_effect effect;
};

/** DFU Target node status parameters. */
struct bt_mesh_dfu_target_status {
	/** Status of the previous operation. */
	enum bt_mesh_dfu_status status;
	/** Phase of the current DFU transfer. */
	enum bt_mesh_dfu_phase phase;
	/** The effect the update will have on the Target device's state. */
	enum bt_mesh_dfu_effect effect;
	/** BLOB ID used in the transfer. */
	uint64_t blob_id;
	/** Image index to transfer. */
	uint8_t img_idx;
	/** TTL used in the transfer. */
	uint8_t ttl;

	/** Additional response time for the Target nodes, in 10-second increments.
	 *
	 *  The extra time can be used to give the Target nodes more time to respond
	 *  to messages from the Client. The actual timeout will be calculated
	 *  according to the following formula:
	 *
	 *  @verbatim
	 *  timeout = 20 seconds + (10 seconds * timeout_base) + (100 ms * TTL)
	 *  @endverbatim
	 *
	 *  If a Target node fails to respond to a message from the Client within the
	 *  configured transfer timeout, the Target node is dropped.
	 */
	uint16_t timeout_base;
};

/** @brief DFU image callback.
 *
 *  The image callback is called for every DFU image on the Target node when
 *  calling @ref bt_mesh_dfu_cli_imgs_get.
 *
 *  @param cli     Firmware Update Client model instance.
 *  @param ctx     Message context of the received message.
 *  @param idx     Image index.
 *  @param total   Total number of images on the Target node.
 *  @param img     Image information for the given image index.
 *  @param cb_data Callback data.
 *
 *  @retval BT_MESH_DFU_ITER_STOP     Stop iterating through the image list and
 *                                    return from @ref bt_mesh_dfu_cli_imgs_get.
 *  @retval BT_MESH_DFU_ITER_CONTINUE Continue iterating through the image list
 *                                    if any images remain.
 */
typedef enum bt_mesh_dfu_iter (*bt_mesh_dfu_img_cb_t)(
	struct bt_mesh_dfu_cli *cli, struct bt_mesh_msg_ctx *ctx, uint8_t idx,
	uint8_t total, const struct bt_mesh_dfu_img *img, void *cb_data);

/** Firmware Update Client event callbacks. */
struct bt_mesh_dfu_cli_cb {
	/** @brief BLOB transfer is suspended.
	 *
	 * Called when the BLOB transfer is suspended due to response timeout from all Target nodes.
	 *
	 * @param cli    Firmware Update Client model instance.
	 */
	void (*suspended)(struct bt_mesh_dfu_cli *cli);

	/** @brief DFU ended.
	 *
	 *  Called when the DFU transfer ends, either because all Target nodes were
	 *  lost or because the transfer was completed successfully.
	 *
	 *  @param cli    Firmware Update Client model instance.
	 *  @param reason Reason for ending.
	 */
	void (*ended)(struct bt_mesh_dfu_cli *cli,
		      enum bt_mesh_dfu_status reason);

	/** @brief DFU transfer applied on all active Target nodes.
	 *
	 *  Called at the end of the apply procedure started by @ref
	 *  bt_mesh_dfu_cli_apply.
	 *
	 *  @param cli Firmware Update Client model instance.
	 */
	void (*applied)(struct bt_mesh_dfu_cli *cli);

	/** @brief DFU transfer confirmed on all active Target nodes.
	 *
	 *  Called at the end of the apply procedure started by @ref
	 *  bt_mesh_dfu_cli_confirm.
	 *
	 *  @param cli Firmware Update Client model instance.
	 */
	void (*confirmed)(struct bt_mesh_dfu_cli *cli);

	/** @brief DFU Target node was lost.
	 *
	 *  A DFU Target node was dropped from the receivers list. The Target node's
	 *  @c status is set to reflect the reason for the failure.
	 *
	 *  @param cli    Firmware Update Client model instance.
	 *  @param target DFU Target node that was lost.
	 */
	void (*lost_target)(struct bt_mesh_dfu_cli *cli,
			    struct bt_mesh_dfu_target *target);
};

/** Firmware Update Client model instance.
 *
 *  Should be initialized with @ref BT_MESH_DFU_CLI_INIT.
 */
struct bt_mesh_dfu_cli {
	/** Callback structure. */
	const struct bt_mesh_dfu_cli_cb *cb;
	/** Underlying BLOB Transfer Client. */
	struct bt_mesh_blob_cli blob;

	/* runtime state */

	uint32_t op;
	struct bt_mesh_model *mod;

	struct {
		const struct bt_mesh_dfu_slot *slot;
		const struct bt_mesh_blob_io *io;
		struct bt_mesh_blob_xfer blob;
		uint8_t state;
		uint8_t flags;
	} xfer;

	struct {
		uint8_t ttl;
		uint8_t type;
		uint8_t img_cnt;
		uint16_t addr;
		struct k_sem sem;
		void *params;
		bt_mesh_dfu_img_cb_t img_cb;
	} req;
};

/** BLOB parameters for Firmware Update Client transfer: */
struct bt_mesh_dfu_cli_xfer_blob_params {
	/* Logarithmic representation of the block size. */
	uint8_t block_size_log;
	/** Base chunk size. May be smaller for the last chunk. */
	uint16_t chunk_size;
};

/** Firmware Update Client transfer parameters: */
struct bt_mesh_dfu_cli_xfer {
	/** BLOB ID to use for this transfer, or 0 to set it randomly. */
	uint64_t blob_id;
	/** DFU image slot to transfer. */
	const struct bt_mesh_dfu_slot *slot;
	/**  Transfer mode (Push (Push BLOB Transfer Mode) or Pull (Pull BLOB Transfer Mode)) */
	enum bt_mesh_blob_xfer_mode mode;
	/** BLOB parameters to be used for the transfer, or NULL to retrieve Target nodes'
	 *  capabilities before sending a firmware.
	 */
	const struct bt_mesh_dfu_cli_xfer_blob_params *blob_params;
};

/** @brief Start distributing a DFU.
 *
 *  Starts distribution of the firmware in the given slot to the list of DFU
 *  Target nodes in @c ctx. The transfer runs in the background, and its end is
 *  signalled through the @ref bt_mesh_dfu_cli_cb::ended callback.
 *
 *  @note The BLOB Transfer Client transfer inputs @c targets list must point to a list of @ref
 *  bt_mesh_dfu_target nodes.
 *
 *  @param cli    Firmware Update Client model instance.
 *  @param inputs BLOB Transfer Client transfer inputs.
 *  @param io     BLOB stream to read BLOB from.
 *  @param xfer   Firmware Update Client transfer parameters.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_send(struct bt_mesh_dfu_cli *cli,
			 const struct bt_mesh_blob_cli_inputs *inputs,
			 const struct bt_mesh_blob_io *io,
			 const struct bt_mesh_dfu_cli_xfer *xfer);

/** @brief Suspend a DFU transfer.
 *
 *  @param cli Firmware Update Client instance.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_suspend(struct bt_mesh_dfu_cli *cli);

/** @brief Resume the suspended transfer.
 *
 *  @param cli Firmware Update Client instance.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_resume(struct bt_mesh_dfu_cli *cli);

/** @brief Cancel a DFU transfer.
 *
 *  Will cancel the ongoing DFU transfer, or the transfer on a specific Target
 *  node if @c ctx is valid.
 *
 *  @param cli Firmware Update Client model instance.
 *  @param ctx Message context, or NULL to cancel the ongoing DFU transfer.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_cancel(struct bt_mesh_dfu_cli *cli,
			   struct bt_mesh_msg_ctx *ctx);

/** @brief Apply the completed DFU transfer.
 *
 *  A transfer can only be applied after it has ended successfully. The Firmware
 *  Update Client's @c applied callback is called at the end of the apply procedure.
 *
 *  @param cli Firmware Update Client model instance.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_apply(struct bt_mesh_dfu_cli *cli);

/** @brief Confirm that the active transfer has been applied on the Target nodes.
 *
 *  A transfer can only be confirmed after it has been applied. The Firmware Update
 *  Client's @c confirmed callback is called at the end of the confirm
 *  procedure.
 *
 *  Target nodes that have reported the effect as @ref BT_MESH_DFU_EFFECT_UNPROV
 *  are expected to not respond to the query, and will fail if they do.
 *
 *  @param cli Firmware Update Client model instance.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_confirm(struct bt_mesh_dfu_cli *cli);

/** @brief Get progress as a percentage of completion.
 *
 *  @param cli Firmware Update Client model instance.
 *
 *  @return The progress of the current transfer in percent, or 0 if no
 *          transfer is active.
 */
uint8_t bt_mesh_dfu_cli_progress(struct bt_mesh_dfu_cli *cli);

/** @brief Check whether a DFU transfer is in progress.
 *
 *  @param cli Firmware Update Client model instance.
 *
 *  @return true if the BLOB Transfer Client is currently participating in a transfer,
 *          false otherwise.
 */
bool bt_mesh_dfu_cli_is_busy(struct bt_mesh_dfu_cli *cli);

/** @brief Perform a DFU image list request.
 *
 *  Requests the full list of DFU images on a Target node, and iterates through
 *  them, calling the @c cb for every image.
 *
 *  The DFU image list request can be used to determine which image index the
 *  Target node holds its different firmwares in.
 *
 *  Waits for a response until the procedure timeout expires.
 *
 *  @param cli       Firmware Update Client model instance.
 *  @param ctx       Message context.
 *  @param cb        Callback to call for each image index.
 *  @param cb_data   Callback data to pass to @c cb.
 *  @param max_count Max number of images to return.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_imgs_get(struct bt_mesh_dfu_cli *cli,
			     struct bt_mesh_msg_ctx *ctx,
			     bt_mesh_dfu_img_cb_t cb, void *cb_data,
			     uint8_t max_count);

/** @brief Perform a metadata check for the given DFU image slot.
 *
 *  The metadata check procedure allows the Firmware Update Client to check if a Target
 *  node will accept a transfer of this DFU image slot, and what the effect would be.
 *
 *  Waits for a response until the procedure timeout expires.
 *
 *  @param cli     Firmware Update Client model instance.
 *  @param ctx     Message context.
 *  @param img_idx Target node's image index to check.
 *  @param slot    DFU image slot to check for.
 *  @param rsp     Metadata status response buffer.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_metadata_check(struct bt_mesh_dfu_cli *cli,
				   struct bt_mesh_msg_ctx *ctx, uint8_t img_idx,
				   const struct bt_mesh_dfu_slot *slot,
				   struct bt_mesh_dfu_metadata_status *rsp);

/** @brief Get the status of a Target node.
 *
 *  @param cli Firmware Update Client model instance.
 *  @param ctx Message context.
 *  @param rsp Response data buffer.
 *
 *  @return 0 on success, or (negative) error code otherwise.
 */
int bt_mesh_dfu_cli_status_get(struct bt_mesh_dfu_cli *cli,
			       struct bt_mesh_msg_ctx *ctx,
			       struct bt_mesh_dfu_target_status *rsp);

/** @brief Get the current procedure timeout value.
 *
 *  @return The configured procedure timeout.
 */
int32_t bt_mesh_dfu_cli_timeout_get(void);

/** @brief Set the procedure timeout value.
 *
 *  @param timeout The new procedure timeout.
 */
void bt_mesh_dfu_cli_timeout_set(int32_t timeout);

/** @cond INTERNAL_HIDDEN */
extern const struct bt_mesh_blob_cli_cb _bt_mesh_dfu_cli_blob_handlers;
extern const struct bt_mesh_model_cb _bt_mesh_dfu_cli_cb;
extern const struct bt_mesh_model_op _bt_mesh_dfu_cli_op[];
/** @endcond */

#ifdef __cplusplus
}
#endif

#endif /* ZEPHYR_INCLUDE_BLUETOOTH_MESH_DFU_CLI_H__ */

/** @} */