diff --git a/boards/nxp/rd_rw612_bga/doc/index.rst b/boards/nxp/rd_rw612_bga/doc/index.rst
index 3797d1b..9f115e4 100644
--- a/boards/nxp/rd_rw612_bga/doc/index.rst
+++ b/boards/nxp/rd_rw612_bga/doc/index.rst
@@ -49,6 +49,8 @@
 +-----------+------------+-----------------------------------+
 | TRNG      | on-chip    | entropy                           |
 +-----------+------------+-----------------------------------+
+| DMIC      | on-chip    | dmic                              |
++-----------+------------+-----------------------------------+
 | WWDT      | on-chip    | watchdog                          |
 +-----------+------------+-----------------------------------+
 | CTIMER    | on-chip    | counter                           |
diff --git a/boards/nxp/rd_rw612_bga/rd_rw612_bga-pinctrl.dtsi b/boards/nxp/rd_rw612_bga/rd_rw612_bga-pinctrl.dtsi
index d55a83f..f7b131a 100644
--- a/boards/nxp/rd_rw612_bga/rd_rw612_bga-pinctrl.dtsi
+++ b/boards/nxp/rd_rw612_bga/rd_rw612_bga-pinctrl.dtsi
@@ -32,6 +32,16 @@
 		};
 	};
 
+	pinmux_dmic0: pinmux_dmic0 {
+		group0 {
+			pinmux = <IO_MUX_PDM_IO51
+				IO_MUX_PDM_IO52
+				IO_MUX_PDM_IO53
+				IO_MUX_PDM_IO54>;
+			slew-rate = "fast";
+		};
+	};
+
 	pinmux_flexspi: pinmux_flexspi {
 		group0 {
 			pinmux = <IO_MUX_QUAD_SPI_FLASH_IO28
diff --git a/boards/nxp/rd_rw612_bga/rd_rw612_bga.dtsi b/boards/nxp/rd_rw612_bga/rd_rw612_bga.dtsi
index e2793a1..23e9d24 100644
--- a/boards/nxp/rd_rw612_bga/rd_rw612_bga.dtsi
+++ b/boards/nxp/rd_rw612_bga/rd_rw612_bga.dtsi
@@ -13,6 +13,7 @@
 		sw0 = &sw_4;
 		i2c-0 = &flexcomm2;
 		watchdog0 = &wwdt;
+		dmic-dev = &dmic0;
 	};
 
 	chosen {
@@ -125,6 +126,47 @@
 	};
 };
 
+&dmic0 {
+	pinctrl-0 = <&pinmux_dmic0>;
+	pinctrl-names = "default";
+	use2fs;
+	status = "okay";
+};
+
+/* Configure pdm channels 0-3 with gain, and cutoff settings
+ * appropriate for the attached MEMS microphones.
+ * Note that PDMC0/PDMC1 and PDMC2/PDMC3 are each connected to the same
+ * microphone. For best results, read from PDM HW channel 0 as left channel,
+ * and PDM HW channel 1 as right channel.
+ */
+&pdmc0 {
+	status = "okay";
+	gainshift = <3>;
+	dc-cutoff = "155hz";
+	dc-gain = <1>;
+};
+
+&pdmc1 {
+	status = "okay";
+	gainshift = <3>;
+	dc-cutoff = "155hz";
+	dc-gain = <1>;
+};
+
+&pdmc2 {
+	status = "okay";
+	gainshift = <3>;
+	dc-cutoff = "155hz";
+	dc-gain = <1>;
+};
+
+&pdmc3 {
+	status = "okay";
+	gainshift = <3>;
+	dc-cutoff = "155hz";
+	dc-gain = <1>;
+};
+
 &dma0 {
 	status = "okay";
 };
diff --git a/boards/nxp/rd_rw612_bga/rd_rw612_bga.yaml b/boards/nxp/rd_rw612_bga/rd_rw612_bga.yaml
index 61d73f0..0457f38 100644
--- a/boards/nxp/rd_rw612_bga/rd_rw612_bga.yaml
+++ b/boards/nxp/rd_rw612_bga/rd_rw612_bga.yaml
@@ -16,6 +16,7 @@
 flash: 65536
 supported:
   - dma
+  - dmic
   - gpio
   - spi
   - i2c
diff --git a/samples/drivers/audio/dmic/boards/rd_rw612_bga.overlay b/samples/drivers/audio/dmic/boards/rd_rw612_bga.overlay
new file mode 100644
index 0000000..ce71fa6
--- /dev/null
+++ b/samples/drivers/audio/dmic/boards/rd_rw612_bga.overlay
@@ -0,0 +1,3 @@
+dmic_dev: &dmic0 {
+        status = "okay";
+};
diff --git a/tests/drivers/audio/dmic_api/boards/rd_rw612_bga.overlay b/tests/drivers/audio/dmic_api/boards/rd_rw612_bga.overlay
new file mode 100644
index 0000000..4901818
--- /dev/null
+++ b/tests/drivers/audio/dmic_api/boards/rd_rw612_bga.overlay
@@ -0,0 +1,39 @@
+/*
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Copyright 2023 NXP
+ */
+
+/* Enable PDM channels 0-3,
+ * Gain settings are configured for testing with a PDM generator,
+ * using a -20dbFS sine wave.
+ */
+&dmic0 {
+	dmic-channel@0 {
+		status = "okay";
+		gainshift = <2>;
+		dc-cutoff = "155hz";
+		dc-gain = <1>;
+	};
+
+	dmic-channel@1 {
+		status = "okay";
+		gainshift = <2>;
+		dc-cutoff = "155hz";
+		dc-gain = <1>;
+	};
+
+	dmic-channel@2 {
+		status = "okay";
+		gainshift = <2>;
+		dc-cutoff = "155hz";
+		dc-gain = <1>;
+	};
+
+	dmic-channel@3 {
+		status = "okay";
+		gainshift = <2>;
+		dc-cutoff = "155hz";
+		dc-gain = <1>;
+	};
+};