/*
 * Copyright 2022 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv8-m.dtsi>
#include <zephyr/dt-bindings/adc/adc.h>
#include <zephyr/dt-bindings/clock/mcux_lpc_syscon_clock.h>
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/i2c/i2c.h>
#include <zephyr/dt-bindings/inputmux/inputmux_trigger_ports.h>
#include <mem.h>

/ {
	chosen {
		zephyr,entropy = &css;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			compatible = "arm,cortex-m33f";
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <1>;

			mpu: mpu@e000ed90 {
				compatible = "arm,armv8m-mpu";
				reg = <0xe000ed90 0x40>;
			};
		};
	};
};

&sram {
	#address-cells = <1>;
	#size-cells = <1>;

	/* lpc55_3x Memory configurations:
	 *
	 * LPC55x36: RAMX: 16K, SRAM0: 16K, SRAM1: 16K, SRAM2: 32K, SRAM3: 32K, SRAM4: 16K
	 */
	sramx: memory@4000000 {
		compatible = "mmio-sram";
		reg = <0x04000000 DT_SIZE_K(16)>;
	};
	sram0: memory@20000000 {
		compatible = "mmio-sram";
		reg = <0x20000000 DT_SIZE_K(16)>;
	};
	sram1: memory@20004000 {
		compatible = "mmio-sram";
		reg = <0x20004000 DT_SIZE_K(16)>;
	};
	sram2: memory@20008000 {
		compatible = "mmio-sram";
		reg = <0x20008000 DT_SIZE_K(32)>;
	};
	sram3: memory@20010000 {
		compatible = "mmio-sram";
		reg = <0x20010000 DT_SIZE_K(32)>;
	};
	sram4: memory@20018000 {
		compatible = "mmio-sram";
		reg = <0x20018000 DT_SIZE_K(16)>;
	};
};

&peripheral {
	#address-cells = <1>;
	#size-cells = <1>;

	syscon: syscon@0 {
		compatible = "nxp,lpc-syscon";
		reg = <0x0 0x1000>;
		#clock-cells = <1>;
	};

	iap: flash-controller@34000 {
		compatible = "nxp,iap-fmc553";
		reg = <0x34000 0x1000>;
		#address-cells = <1>;
		#size-cells = <1>;
		status = "ok";

		flash0: flash@0 {
			compatible = "soc-nv-flash";
			reg = <0x0 DT_SIZE_K(246)>;
			erase-block-size = <512>;
			write-block-size = <512>;
		};

		flash_reserved: flash@3d800 {
			compatible = "soc-nv-flash";
			reg = <0x0003d800 DT_SIZE_K(10)>;
			status = "disabled";
		};

		boot_rom: flash@3000000 {
			compatible = "soc-nv-flash";
			reg = <0x3000000 DT_SIZE_K(128)>;
		};
	};

	iocon: iocon@1000 {
		compatible = "nxp,lpc-iocon";
		reg = <0x1000 0x100>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x1000 0x100>;
		pinctrl: pinctrl {
			compatible = "nxp,lpc-iocon-pinctrl";
		};
	};

	gpio0: gpio@0 {
		compatible = "nxp,lpc-gpio";
		reg = <0x8c000 0x278c>;
		int-source = "pint";
		gpio-controller;
		#gpio-cells = <2>;
		port = <0>;
	};

	gpio1: gpio@1 {
		compatible = "nxp,lpc-gpio";
		reg = <0x8c000 0x278c>;
		int-source = "pint";
		gpio-controller;
		#gpio-cells = <2>;
		port = <1>;
	};

	gpio2: gpio@2 {
		compatible = "nxp,lpc-gpio";
		reg = <0x8c000 0x278c>;
		gpio-controller;
		#gpio-cells = <2>;
		port = <2>;
	};

	dma0: dma-controller@82000 {
		compatible = "nxp,lpc-dma";
		reg = <0x82000 0x1000>;
		interrupts = <1 0>;
		dma-channels = <52>;
		nxp,dma-num-of-otrigs = <4>;
		nxp,dma-otrig-base-address = <LPC55S36_DMA0_OTRIG_BASE>;
		nxp,dma-itrig-base-address = <LPC55S36_DMA0_ITRIG_BASE>;
		status = "disabled";
		#dma-cells = <1>;
	};

	dma1: dma-controller@a7000 {
		compatible = "nxp,lpc-dma";
		reg = <0xa7000 0x1000>;
		interrupts = <58 0>;
		dma-channels = <16>;
		nxp,dma-num-of-otrigs = <4>;
		nxp,dma-otrig-base-address = <LPC55S36_DMA1_OTRIG_BASE>;
		nxp,dma-itrig-base-address = <LPC55S36_DMA1_ITRIG_BASE>;
		status = "disabled";
		#dma-cells = <1>;
	};

	pint: pint@4000 {
		compatible = "nxp,pint";
		reg = <0x4000 0x1000>;
		interrupt-controller;
		#interrupt-cells = <1>;
		#address-cells = <0>;
		interrupts = <4 2>, <5 2>, <6 2>, <7 2>,
			<32 2>, <33 2>, <34 2>, <35 2>;
		num-lines = <8>;
		num-inputs = <64>;
	};

	flexcomm0: flexcomm@86000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x86000 0x1000>;
		interrupts = <14 0>;
		clocks = <&syscon MCUX_FLEXCOMM0_CLK>;
		dmas = <&dma0 4>, <&dma0 5>;
		dma-names = "rx", "tx";
		status = "disabled";
	};

	flexcomm1: flexcomm@87000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x87000 0x1000>;
		interrupts = <15 0>;
		clocks = <&syscon MCUX_FLEXCOMM1_CLK>;
		dmas = <&dma0 6>, <&dma0 7>;
		dma-names = "rx", "tx";
		status = "disabled";
	};

	flexcomm2: flexcomm@88000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x88000 0x1000>;
		interrupts = <16 0>;
		clocks = <&syscon MCUX_FLEXCOMM2_CLK>;
		dmas = <&dma0 10>, <&dma0 11>;
		dma-names = "rx", "tx";
		status = "disabled";
	};

	flexcomm3: flexcomm@89000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x89000 0x1000>;
		interrupts = <17 0>;
		clocks = <&syscon MCUX_FLEXCOMM3_CLK>;
		dmas = <&dma0 8>, <&dma0 9>;
		dma-names = "rx", "tx";
		status = "disabled";
	};

	flexcomm4: flexcomm@8a000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x8a000 0x1000>;
		interrupts = <18 0>;
		clocks = <&syscon MCUX_FLEXCOMM4_CLK>;
		dmas = <&dma0 12>, <&dma0 13>;
		dma-names = "rx", "tx";
		status = "disabled";
	};

	flexcomm5: flexcomm@96000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x96000 0x1000>;
		interrupts = <19 0>;
		clocks = <&syscon MCUX_FLEXCOMM5_CLK>;
		dmas = <&dma0 14>, <&dma0 15>;
		dma-names = "rx", "tx";
		status = "disabled";
	};

	flexcomm6: flexcomm@97000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x97000 0x1000>;
		interrupts = <20 0>;
		clocks = <&syscon MCUX_FLEXCOMM6_CLK>;
		dmas = <&dma0 16>, <&dma0 17>;
		dma-names = "rx", "tx";
		status = "disabled";
	};

	flexcomm7: flexcomm@98000 {
		compatible = "nxp,lpc-flexcomm";
		reg = <0x98000 0x1000>;
		interrupts = <21 0>;
		clocks = <&syscon MCUX_FLEXCOMM7_CLK>;
		dmas = <&dma0 18>, <&dma0 19>;
		dma-names = "rx", "tx";
		status = "disabled";
	};

	hs_lspi: spi@9f000 {
		compatible = "nxp,lpc-spi";
		reg = <0x9f000 0x1000>;
		interrupts = <59 0>;
		clocks = <&syscon MCUX_HS_SPI_CLK>;
		dmas = <&dma0 2>, <&dma0 3>;
		dma-names = "rx", "tx";
		status = "disabled";
		#address-cells = <1>;
		#size-cells = <0>;
	};

	css: css@4003000 {
		compatible = "nxp,css-v2";
		reg = <0x4003000 0x200>;
		status = "okay";
	};

	adc0: adc@A0000 {
		compatible = "nxp,lpc-lpadc";
		reg = <0xA0000 0x1000>;
		interrupts = <22 0>;
		status = "disabled";
		clk-divider = <8>;
		clk-source = <0>;
		voltage-ref= <1>;
		calibration-average = <128>;
		power-level = <0>;
		offset-value-a = <10>;
		offset-value-b = <10>;
		#io-channel-cells = <1>;
		dmas = <&dma0 21>, <&dma0 22>;
		dma-names = "adc0-dma0", "adc0-dma1";
		nxp,reference-supply = <&vref0>;
	};

	dac0: dac@b2000 {
		compatible = "nxp,lpdac";
		reg = < 0xb2000 0x1000>;
		interrupts = <74 0>;
		status = "disabled";
		voltage-reference = <0>;
		#io-channel-cells = <1>;
	};

	dac1: dac@b6000 {
		compatible = "nxp,lpdac";
		reg = < 0xb6000 0x1000>;
		interrupts = <75 0>;
		status = "disabled";
		voltage-reference = <0>;
		#io-channel-cells = <1>;
	};

	dac2: dac@b9000 {
		compatible = "nxp,lpdac";
		reg = < 0xb9000 0x1000>;
		interrupts = <76 0>;
		status = "disabled";
		voltage-reference = <0>;
		#io-channel-cells = <1>;
	};

	can0: can@4009d000 {
		compatible = "nxp,lpc-mcan";
		reg = <0x4009d000 0x1000>;
		interrupts = <43 0>, <44 0>;
		interrupt-names = "int0", "int1";
		clocks = <&syscon MCUX_MCAN_CLK>;
		bosch,mram-cfg = <0x0 15 15 8 8 0 15 15>;
		status = "disabled";
	};

	flexpwm0: flexpwm@400C3000 {
		compatible = "nxp,flexpwm";
		reg = <0x400C3000 0x1000>;
		interrupt-names = "INPUT-CAPTURE", "FAULT", "RELOAD-ERROR";
		interrupts = <80 0>, <81 0>, <82 0>;
		flexpwm0_pwm0: pwm0 {
			compatible = "nxp,imx-pwm";
			index = <0>;
			interrupt-names = "COMPARE-SUB0", "RELOAD-SUB0";
			interrupts = <83 0>, <84 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK 0 0>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm1: pwm1 {
			compatible = "nxp,imx-pwm";
			index = <1>;
			interrupt-names = "COMPARE-SUB1", "RELOAD-SUB1";
			interrupts = <85 0>, <86 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK 0 0>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm2: pwm2 {
			compatible = "nxp,imx-pwm";
			index = <2>;
			interrupt-names = "COMPARE-SUB2", "RELOAD-SUB2";
			interrupts = <87 0>, <88 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK 0 0>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm3: pwm3 {
			compatible = "nxp,imx-pwm";
			index = <3>;
			interrupt-names = "COMPARE-SUB3", "RELOAD-SUB3";
			interrupts = <89 0>, <90 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK 0 0>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};
	};


	flexpwm1: flexpwm@400C5000 {
		compatible = "nxp,flexpwm";
		reg = <0x400C5000 0x1000>;
		interrupt-names = "INPUT-CAPTURE", "FAULT", "RELOAD-ERROR";
		interrupts = <91 0>, <92 0>, <93 0>;
		flexpwm1_pwm0: pwm0 {
			compatible = "nxp,imx-pwm";
			index = <0>;
			interrupt-names = "COMPARE-SUB0", "RELOAD-SUB0";
			interrupts = <94 0>, <95 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK 0 0>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm1: pwm1 {
			compatible = "nxp,imx-pwm";
			index = <1>;
			interrupt-names = "COMPARE-SUB1", "RELOAD-SUB1";
			interrupts = <96 0>, <97 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK 0 0>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm2: pwm2 {
			compatible = "nxp,imx-pwm";
			index = <2>;
			interrupt-names = "COMPARE-SUB2", "RELOAD-SUB2";
			interrupts = <98 0>, <99 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK 0 0>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm3: pwm3 {
			compatible = "nxp,imx-pwm";
			index = <3>;
			interrupt-names = "COMPARE-SUB3", "RELOAD-SUB3";
			interrupts = <100 0>, <101 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK 0 0>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};
	};

	usbfs: usbfs@84000 {
		compatible = "nxp,lpcip3511";
		reg = <0x84000 0x1000>;
		interrupts = <28 0>;
		num-bidir-endpoints = <5>;
		maximum-speed = "full-speed";
		status = "disabled";
	};

	sc_timer: pwm@85000 {
		compatible = "nxp,sctimer-pwm";
		reg = <0x85000 0x1000>;
		interrupts = <12 0>;
		status = "disabled";
		clocks = <&syscon MCUX_SCTIMER_CLK 0 0>;
		prescaler = <2>;
		#pwm-cells = <3>;
	};

	vref0: vref@b5000 {
		compatible = "nxp,vref";
		regulator-name = "lpc55s36-vref";
		reg = <0xb5000 0x30>;
		status = "disabled";
		nxp,buffer-startup-delay-us = <400>;
		nxp,bandgap-startup-time-us = <20>;
	};
};

&nvic {
	arm,num-irq-priority-bits = <3>;
};