/*
 * Copyright (c) 2019, Linaro
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <nxp/nxp_rt10xx.dtsi>

&flexram {
	flexram,num-ram-banks = <4>;
	/* default fuse */
	flexram,bank-spec = <FLEXRAM_OCRAM>,
			     <FLEXRAM_OCRAM>,
			     <FLEXRAM_DTCM>,
			     <FLEXRAM_ITCM>;
};

&sysclk {
	clock-frequency = <500000000>;
};

&itcm {
	reg = <0x00000000 DT_SIZE_K(32)>;
};

&dtcm {
	reg = <0x20000000 DT_SIZE_K(32)>;
};

&ocram {
	reg = <0x20200000 DT_SIZE_K(64)>;
};

&ccm {
	/delete-node/ arm-podf;

	ipg-podf {
		clock-div = <4>;
	};
};

&gpio1 {
	interrupts = <70 0>, <71 0>;
};

&gpio5 {
	interrupts = <73 0>;
};

&gpt_hw_timer {
	interrupts = <30 0>;
};

&gpt2 {
	interrupts = <31 0>;
	gptfreq = <12500000>;
};

&edma0 {
	dma-channels = <16>;
};

/ {
	soc {
		/* Remove GPIO3-GPIO9, they don't exist on RT1010 */
		/delete-node/ gpio@401c0000;
		/delete-node/ gpio@401c4000;
		/delete-node/ gpio@42000000;
		/delete-node/ gpio@42004000;
		/delete-node/ gpio@42008000;
		/delete-node/ gpio@4200c000;

		/* Fixup GPIO2 its a different location on RT1010 */
		/delete-node/ gpio@401bc000;

		gpio2: gpio@42000000 {
			compatible = "nxp,imx-gpio";
			reg = <0x42000000 0x4000>;
			interrupts = <72 0>;
			gpio-controller;
			#gpio-cells = <2>;
			pinmux = <&iomuxc_gpio_sd_00_gpio2_io00>,
				<&iomuxc_gpio_sd_01_gpio2_io01>,
				<&iomuxc_gpio_sd_02_gpio2_io02>,
				<&iomuxc_gpio_sd_03_gpio2_io03>,
				<&iomuxc_gpio_sd_04_gpio2_io04>,
				<&iomuxc_gpio_sd_05_gpio2_io05>,
				<&iomuxc_gpio_sd_06_gpio2_io06>,
				<&iomuxc_gpio_sd_07_gpio2_io07>,
				<&iomuxc_gpio_sd_08_gpio2_io08>,
				<&iomuxc_gpio_sd_09_gpio2_io09>,
				<&iomuxc_gpio_sd_10_gpio2_io10>,
				<&iomuxc_gpio_sd_11_gpio2_io11>,
				<&iomuxc_gpio_sd_12_gpio2_io12>,
				<&iomuxc_gpio_sd_13_gpio2_io13>;
		};

		/* Remove Quad TImers, they don't exist on RT1010 */
		/delete-node/ qtmr@401dc000;
		/delete-node/ qtmr@401e0000;
		/delete-node/ qtmr@401e4000;
		/delete-node/ qtmr@401e8000;

		/* Fixup FlexSPI its a different location on RT1010 */
		/delete-node/ spi@402a8000;
		flexspi: spi@400a0000 {
			compatible = "nxp,imx-flexspi";
			reg = <0x400a0000 0x4000>;
			interrupts = <26 0>;
			#address-cells = <1>;
			#size-cells = <0>;
			ahb-bufferable;
			ahb-cacheable;
			status = "disabled";
			clocks = <&ccm IMX_CCM_FLEXSPI_CLK 0x0 0x0>;
		};

		/* Remove SEMC, it does'nt exist on RT1010 */
		/delete-node/ semc0@402f0000;

		/* Fixup LPI2C1 and LPI2C2, they have different base addr on RT1010 */
		/delete-node/ i2c@403f0000;
		/delete-node/ i2c@403f4000;

		lpi2c1: i2c@401a4000 {
			compatible = "nxp,imx-lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x401a4000 0x4000>;
			interrupts = <28 0>;
			clocks = <&ccm IMX_CCM_LPI2C_CLK 0x70 6>;
			status = "disabled";
		};

		lpi2c2: i2c@401a8000 {
			compatible = "nxp,imx-lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x401a8000 0x4000>;
			interrupts = <29 0>;
			clocks = <&ccm IMX_CCM_LPI2C_CLK 0x70 8>;
			status = "disabled";
		};

		/* Remove LPI2C3 & LPI2C4, they don't exist on RT1010 */
		/delete-node/ i2c@403f8000;
		/delete-node/ i2c@403fc000;

		/* Remove LCDIF, it doesn't exist on RT1010 */
		/delete-node/ display-controller@402b8000;

		/* Fixup LPSPI1 and LPSPI2, they have different base addr on RT1010 */
		/delete-node/ spi@40394000;
		/delete-node/ spi@40398000;
		lpspi1: spi@40194000 {
			compatible = "nxp,imx-lpspi";
			reg = <0x40194000 0x4000>;
			interrupts = <32 3>;
			status = "disabled";
			clocks = <&ccm IMX_CCM_LPSPI_CLK 0x6c 0>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		lpspi2: spi@40198000 {
			compatible = "nxp,imx-lpspi";
			reg = <0x40198000 0x4000>;
			interrupts = <33 3>;
			status = "disabled";
			clocks = <&ccm IMX_CCM_LPSPI_CLK 0x6c 2>;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		/* Remove LPUART5-8, they don't exist on RT1010 */
		/delete-node/ uart@40194000;
		/delete-node/ uart@40198000;
		/delete-node/ uart@4019c000;
		/delete-node/ uart@401a0000;

		/* Remove ADC2, it doesn't exist on RT1010 */
		/delete-node/ adc@400C8000;

		/* RT1010 has only one flexSPI controller */
		/delete-node/ spi@402a4000;

		/* Fixup FlexPWM1 it has different base addr and interrupt numbers on RT1010 */
		/delete-node/ flexpwm@403dc000;
		flexpwm1: flexpwm@401cc000 {
			compatible = "nxp,flexpwm";
			reg = <0x401cc000 0x4000>;
			interrupts = <38 0>;

			flexpwm1_pwm0: pwm0 {
				compatible = "nxp,imx-pwm";
				index = <0>;
				interrupts = <34 0>;
				#pwm-cells = <3>;
				clocks = <&ccm IMX_CCM_PWM_CLK 0 0>;
				nxp,prescaler = <128>;
				status = "disabled";
			};

			flexpwm1_pwm1: pwm1 {
				compatible = "nxp,imx-pwm";
				index = <1>;
				interrupts = <35 0>;
				#pwm-cells = <3>;
				clocks = <&ccm IMX_CCM_PWM_CLK 0 0>;
				nxp,prescaler = <128>;
				status = "disabled";
			};

			flexpwm1_pwm2: pwm2 {
				compatible = "nxp,imx-pwm";
				index = <2>;
				interrupts = <36 0>;
				#pwm-cells = <3>;
				clocks = <&ccm IMX_CCM_PWM_CLK 0 0>;
				nxp,prescaler = <128>;
				status = "disabled";
			};

			flexpwm1_pwm3: pwm3 {
				compatible = "nxp,imx-pwm";
				index = <3>;
				interrupts = <37 0>;
				#pwm-cells = <3>;
				clocks = <&ccm IMX_CCM_PWM_CLK 0 0>;
				nxp,prescaler = <128>;
				status = "disabled";
			};
		};
		/* Remove FlexPWM2-4, they don't exist on RT1010 */
		/delete-node/ flexpwm@403e0000;
		/delete-node/ flexpwm@403e4000;
		/delete-node/ flexpwm@403e8000;

		/* Remove Ethernet, it does'nt exist on RT1010 */
		/delete-node/ ethernet@402d8000;

		/* Fixup USB it has different base addr and interrupt numbers on RT1010 */
		/delete-node/ usbd@402e0000;
		usb1: usbd@400e4000 {
			compatible = "nxp,ehci";
			reg = <0x400e4000 0x200>;
			interrupts = <25 1>;
			interrupt-names = "usb_otg";
			clocks = <&usbclk>;
			num-bidir-endpoints = <8>;
			status = "disabled";
		};

		/* Remove USB2, it does'nt exist on RT1010 */
		/delete-node/ usbd@402e0200;

		/* Remove USDHC, they don't exist on RT1010 */
		/delete-node/ usdhc@402c0000;
		/delete-node/ usdhc@402c4000;

		/* Remove CSI, it does'nt exist on RT1010 */
		/delete-node/ csi@402bc000;

		/* Remove FLEXCAN, they don't exist on RT1010 */
		/delete-node/ can@401d0000;
		/delete-node/ can@401d4000;
		/delete-node/ can@401d8000;

		/* Remove WDOG2, it does'nt exist on RT1010 */
		/delete-node/ wdog@400d0000;

		/* Fix SAI1, 3, it has different base addr on RT1010 */
		/delete-node/ sai@40384000;
		/delete-node/ sai@4038c000;
		sai1: sai@401e0000 {
			compatible = "nxp,mcux-i2s";
			#address-cells = <1>;
			#size-cells = <0>;
			#pinmux-cells = <2>;
			reg = <0x401e0000 0x4000>;
			clocks = <&ccm IMX_CCM_SAI1_CLK 0x7C 18>;
			/* Source clock from Audio PLL */
			clock-mux = <2>;
			/* Audio PLL Output Frequency is determined by:
			 * (Fref * (DIV_SELECT + NUM/DENOM)) / POST_DIV
			 * = (24MHz * (32 + 77 / 100)) / 1 = 786.48 MHz
			 */
		       pll-clocks = <&anatop 0x70 0xC000 0>,
				      <&anatop 0x70 0x7F 32>,
				      <&anatop 0x70 0x180000 1>,
				      <&anatop 0x80 0x3FFFFFFF 77>,
				      <&anatop 0x90 0x3FFFFFFF 100>;
			pll-clock-names = "src", "lp", "pd", "num", "den";
			/* The maximum input frequency into the SAI mclk input is 300MHz
			 * Based on this requirement, pre-div must be at least 3
			 * The pre-div and post-div are one less than the actual divide-by amount.
			 * A pre-div value of 0x1 results in a pre-divider of
			 * (1+1) = 2
			 */
			pre-div = <0x3>;
			podf = <0x0F>;
			pinmuxes = <&iomuxcgpr 0x4 0x80000>;
			interrupts = <56 0>;
			dmas = <&edma0 0 19>, <&edma0 0 20>;
			dma-names = "rx", "tx";
			/* This translates to SAIChannelMask (fsl_sai.c) and
			 * cannot be 0
			 */
			nxp,tx-channel = <1>;
			nxp,tx-dma-channel = <0>;
			nxp,rx-dma-channel = <1>;
			status = "disabled";
		};

		sai3: sai@401e8000 {
			compatible = "nxp,mcux-i2s";
			#address-cells = <1>;
			#size-cells = <0>;
			#pinmux-cells = <2>;
			reg = <0x401e8000 0x4000>;
			clocks = <&ccm IMX_CCM_SAI3_CLK 0x7C 22>;
			/* Source clock from Audio PLL */
			clock-mux = <2>;
			pre-div = <0>;
			podf = <63>;
			pll-clocks = <&anatop 0x70 0xC000 0>,
				   <&anatop 0x70 0x7F 32>,
				   <&anatop 0x70 0x180000 1>,
				   <&anatop 0x80 0x3FFFFFFF 77>,
				   <&anatop 0x90 0x3FFFFFFF 100>;
			pll-clock-names = "src", "lp", "pd", "num", "den";
			pinmuxes = <&iomuxcgpr 0x4 0x200000>;
			interrupts = <58 0>, <59 0>;
			dmas = <&edma0 0 83>, <&edma0 0 84>;
			dma-names = "rx", "tx";
			nxp,tx-channel = <0>;
			nxp,tx-dma-channel = <5>;
			nxp,rx-dma-channel = <6>;
			status = "disabled";
		};

		/* Remove SAI2, it does'nt exist on RT1010 */
		/delete-node/ sai@40388000;
	};
};

/* RT1015 only has two LPSPI blocks */
/delete-node/ &lpspi3;
/delete-node/ &lpspi4;


&gpio1{
	pinmux = <&iomuxc_gpio_00_gpiomux_io00>,
		<&iomuxc_gpio_01_gpiomux_io01>,
		<&iomuxc_gpio_02_gpiomux_io02>,
		<&iomuxc_gpio_03_gpiomux_io03>,
		<&iomuxc_gpio_04_gpiomux_io04>,
		<&iomuxc_gpio_05_gpiomux_io05>,
		<&iomuxc_gpio_06_gpiomux_io06>,
		<&iomuxc_gpio_07_gpiomux_io07>,
		<&iomuxc_gpio_08_gpiomux_io08>,
		<&iomuxc_gpio_09_gpiomux_io09>,
		<&iomuxc_gpio_10_gpiomux_io10>,
		<&iomuxc_gpio_11_gpiomux_io11>,
		<&iomuxc_gpio_12_gpiomux_io12>,
		<&iomuxc_gpio_13_gpiomux_io13>,
		<&iomuxc_gpio_ad_00_gpiomux_io14>,
		<&iomuxc_gpio_ad_01_gpiomux_io15>,
		<&iomuxc_gpio_ad_02_gpiomux_io16>,
		<&iomuxc_gpio_ad_03_gpiomux_io17>,
		<&iomuxc_gpio_ad_04_gpiomux_io18>,
		<&iomuxc_gpio_ad_05_gpiomux_io19>,
		<&iomuxc_gpio_ad_06_gpiomux_io20>,
		<&iomuxc_gpio_ad_07_gpiomux_io21>,
		<&iomuxc_gpio_ad_08_gpiomux_io22>,
		<&iomuxc_gpio_ad_09_gpiomux_io23>,
		<&iomuxc_gpio_ad_10_gpiomux_io24>,
		<&iomuxc_gpio_ad_11_gpiomux_io25>,
		<&iomuxc_gpio_ad_12_gpiomux_io26>,
		<&iomuxc_gpio_ad_13_gpiomux_io27>,
		<&iomuxc_gpio_ad_14_gpiomux_io28>;
};

&gpio5{
	pinmux = <&iomuxc_snvs_pmic_on_req_gpio5_io00>;
};

&pit0 {
	interrupts = <24 0>;
};