#
# Copyright 2021 Grinn
#
# SPDX-License-Identifier: Apache-2.0
#

description: |
    TI INA237 Bidirectional Current and Power Monitor.
    The <zephyr/dt-bindings/sensor/ina237.h> file should be included in the
    DeviceTree and it provides macros that can be used for initializing the
    configuration registers.

compatible: "ti,ina237"

include: ti,ina23x-common.yaml

properties:
  config:
    type: int
    deprecated: true
    default: 0x0000
    description: |
      Value of the configuration register
      e.g shunt voltage and bus voltage ADC conversion
      times and averaging, operating mode for INA230 or
      delay for initial ADC conversion, shunt full scale range
      for INA237.

      Deprecated, please use new properties instead.

  adc-config:
    type: int
    deprecated: true
    default: 0x0000
    description: |
      Value of the ADC configuration register (ADC conversion times,
      averaging, operating mode and etc).

      Deprecated, please use new properties instead.

  alert-config:
    type: int
    description: Diag alert register, default matches the power-on reset value

  adc-mode:
    type: string
    description: |
      ADC channel conversion configuration.
      Default is the power-on reset value.
    default: "Temperature, bus, and shunt voltage continuous"
    enum:
      - "Shutdown single shot"
      - "Bus Voltage single shot"
      - "Shunt Voltage single shot"
      - "Bus and Shunt Voltage single shot"
      - "Temperature Single shot"
      - "Temperature and bus voltage single shot"
      - "Temperature and shunt voltage single shot"
      - "Temperature, bus, and shunt voltage single shot"
      - "Shutdown continuous"
      - "Bus voltage continuous"
      - "Shunt voltage continuous"
      - "Bus and shunt voltage continuous"
      - "Temperature continuous"
      - "Temperature and bus voltage continuous"
      - "Temperature and shunt voltage continuous"
      - "Temperature, bus, and shunt voltage continuous"

  vbus-conversion-time-us:
    type: int
    description: |
      Vbus conversion time in microseconds.
      Default is the power-on reset value.
    default: 1052
    enum: [50, 84, 150, 280, 540, 1052, 2074, 4120]

  vshunt-conversion-time-us:
    type: int
    description: |
      Vshunt conversion time in microseconds.
      Default is the power-on reset value.
    default: 1052
    enum: [50, 84, 150, 280, 540, 1052, 2074, 4120]

  temp-conversion-time-us:
    type: int
    description: |
      Temperature conversion time in microseconds.
      Default is the power-on reset value.
    default: 1052
    enum: [50, 84, 150, 280, 540, 1052, 2074, 4120]

  avg-count:
    type: int
    description: |
      Number of samples to average (applies to all inputs).
      Default is the power-on reset value.
    default: 1
    enum: [1, 4, 16, 64, 128, 256, 512, 1024]

  high-precision:
    type: boolean
    description: |
      Enable high precision mode (4x the resolution).