# IEEE 802.15.4 driver configuration options

# Copyright (c) 2015 Intel Corporation
# SPDX-License-Identifier: Apache-2.0

#
# IEEE 802.15.4 options
#
menuconfig IEEE802154
	bool "IEEE 802.15.4 drivers"
	depends on NETWORKING
	default y if NET_L2_PHY_IEEE802154

if IEEE802154

config IEEE802154_NET_IF_NO_AUTO_START
	bool "IEEE 802.15.4 interface without auto-start"
	help
	  This option allows user to set any configuration and/or filter before
	  the radio becomes operational. For instance, the EUI-64 value can be
	  configured using net_if_set_link_addr(iface, mac, 8,
	  NET_LINK_IEEE802154).
	  When all configurations are done net_if_up() has to be invoked to
	  bring the interface up.

	  This option can be useful when using OpenThread or Zigbee. If you
	  have any doubt about this option leave it as default value.

if !NET_L2_PHY_IEEE802154
config IEEE802154_RAW_MODE
	bool "IEEE 802.15.4 driver without the MAC stack"
	select NET_RAW_MODE
	help
	  This option enables using the drivers in a so-called "raw" mode,
	  i.e. without a MAC stack (the net L2 layer for 802.15.4 will not
	  be built). Used only for very specific cases, such as wpan_serial
	  and wpanusb samples.
endif # !NET_L2_PHY_IEEE802154

config IEEE802154_RDEV
	bool
	help
	  PHY is a ranging-capable device (RDEV)

config IEEE802154_VENDOR_OUI_ENABLE
	bool "Support setting Vendor Organizationally Unique Identifier"
	help
	  This option enables setting custom vendor
	  OUI using IEEE802154_VENDOR_OUI. After enabling,
	  user is obliged to set IEEE802154_VENDOR_OUI value,
	  as this option has no default value.

if IEEE802154_VENDOR_OUI_ENABLE

config IEEE802154_VENDOR_OUI
	int "Vendor Organizationally Unique Identifier"
	help
	  Custom vendor OUI, which makes 24 most-significant
	  bits of MAC address

endif # IEEE802154_VENDOR_OUI_ENABLE

source "drivers/ieee802154/Kconfig.b91"

source "drivers/ieee802154/Kconfig.cc2520"

source "drivers/ieee802154/Kconfig.kw41z"

source "drivers/ieee802154/Kconfig.mcr20a"

source "drivers/ieee802154/Kconfig.nrf5"

source "drivers/ieee802154/Kconfig.cc1200"

source "drivers/ieee802154/Kconfig.cc13xx_cc26xx"

source "drivers/ieee802154/Kconfig.rf2xx"

source "drivers/ieee802154/Kconfig.dw1000"

source "drivers/ieee802154/Kconfig.uart_pipe"

config IEEE802154_CSL_ENDPOINT
	bool "Support for CSL Endpoint"
	help
	  Make this device a CSL (coordinated sampled listening) endpoint with delayed
	  reception handling and CSL IE injection.

config IEEE802154_CSL_DEBUG
	bool "Support for CSL debugging"
	depends on IEEE802154_CSL_ENDPOINT
	help
	  Enable support for CSL debugging by avoiding sleep state in favor of receive state.

config IEEE802154_SELECTIVE_TXCHANNEL
	bool "Support for selective TX channel setting"
	help
	  Enable support for selectively setting TX channel for every timed transmission request.
	  The drivers MAY have the capability IEEE802154_HW_SELECTIVE_TXCHANNEL only if
	  this Kconfig option is enabled. If the Kconfig option is disabled the drivers
	  MUST NOT have the capability.

module = IEEE802154_DRIVER
module-str = IEEE 802.15.4 driver
module-help = Sets log level for IEEE 802.15.4 Device Drivers.
source "subsys/logging/Kconfig.template.log_config"

endif # IEEE802154