/*
 * Copyright (c) 2023 The Chromium OS Authors.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 */

#include <dt-bindings/usb-c/pd.h>

/ {

	pwmleds {
		compatible = "pwm-leds";
		pwm_ctl: g0 {
			pwms = <&pwm15 1 PWM_USEC(50) PWM_POLARITY_INVERTED>;
			label = "PWM CTL";
		};
	};

	pwrctrl {
		compatible = "gpio-leds";

		/* Pin D3 is used to enable VBUS Source */
		source_en: g1 {
			gpios = <&gpiod 3 GPIO_ACTIVE_HIGH>;
			label = "SOURCE_EN";
		};

		/* Pin A1 is used for DCDC_EN */
		dcdc_en: g2 {
			gpios = <&gpioa 1 GPIO_ACTIVE_HIGH>;
			label = "V_CTL2";
		};

		/* Pin D4 enables VCONN on CC1 */
		vconn1_en: vconn1_en {
			gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
			label = "VCONN1_EN";
		};

		/* Pin B9 enables VCONN on CC2 */
		vconn2_en: vconn2_en {
			gpios = <&gpiob 9 GPIO_ACTIVE_LOW>;
			label = "VCONN2_EN";
		};
	};

	/* usbc.rst vbus-voltage-divider-adc start */
	vbus1: vbus {
		compatible = "zephyr,usb-c-vbus-adc";
		io-channels = <&adc1 9>;
		output-ohms = <49900>;
		full-ohms = <(330000 + 49900)>;

		/* Pin B13 is used to control VBUS Discharge for Port1 */
		discharge-gpios = <&gpiob 13 GPIO_ACTIVE_HIGH>;
	};
	/* usbc.rst vbus-voltage-divider-adc end */

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		/* usbc.rst usbc-port start */
		port1: usbc-port@1 {
			compatible = "usb-c-connector";
			reg = <1>;
			tcpc = <&ucpd1>;
			vbus = <&vbus1>;
			power-role = "source";
			typec-power-opmode = "3.0A";
			source-pdos = <PDO_FIXED(5000, 100, 0) PDO_FIXED(9000, 100, 0) PDO_FIXED(15000, 100, 0)>;
		};
		/* usbc.rst usbc-port end */
	};
};