| :orphan: |
| |
| .. _zephyr_2.5: |
| |
| Zephyr 2.5.0 |
| ############# |
| |
| We are pleased to announce the release of Zephyr RTOS version 2.5.0. |
| |
| Major enhancements with this release include: |
| |
| * Introduced support for the SPARC processor architecture and the LEON |
| processor implementation. |
| * Added Thread Local Storage (TLS) support |
| * Added support for per thread runtime statistics |
| * Added support for building with LLVM on X86 |
| * Added new synchronization mechanisms using Condition Variables |
| * Add support for demand paging, initial support on X86. |
| |
| The following sections provide detailed lists of changes by component. |
| |
| Security Vulnerability Related |
| ****************************** |
| |
| The following CVEs are addressed by this release: |
| |
| * CVE-2021-3323: Under embargo until 2021-04-14 |
| * CVE-2021-3321: Under embargo until 2021-04-14 |
| * CVE-2021-3320: Under embargo until 2021-04-14 |
| |
| More detailed information can be found in: |
| https://docs.zephyrproject.org/latest/security/vulnerabilities.html |
| |
| Known issues |
| ************ |
| |
| You can check all currently known issues by listing them using the GitHub |
| interface and listing all issues with the `bug label |
| <https://github.com/zephyrproject-rtos/zephyr/issues?q=is%3Aissue+is%3Aopen+label%3Abug>`_. |
| |
| API Changes |
| *********** |
| |
| * Removed SETTINGS_USE_BASE64 support as its been deprecated for more than |
| two releases. |
| |
| * The :c:func:`lwm2m_rd_client_start` function now accepts an additional |
| ``flags`` parameter, which allows to configure current LwM2M client session, |
| for instance enable bootstrap procedure in the curent session. |
| |
| * LwM2M execute now supports arguments. The execute callback |
| :c:type:`lwm2m_engine_execute_cb_t` is extended with an ``args`` parameter |
| which points to the CoAP payload that comprises the arguments, and an |
| ``args_len`` parameter to indicate the length of the ``args`` data. |
| |
| * Changed vcnl4040 dts binding default for property 'proximity-trigger'. |
| Changed the default to match the HW POR state for this property. |
| |
| * The :c:func:`clock_control_async_on` function will now take ``callback`` and |
| ``user_data`` as arguments instead of structure which contained list node, |
| callback and user data. |
| |
| * The :c:func:`mqtt_keepalive_time_left` function now returns -1 if keep alive |
| messages are disabled by setting ``CONFIG_MQTT_KEEPALIVE`` to 0. |
| |
| * The ``CONFIG_LEGACY_TIMEOUT_API`` mode has been removed. All kernel |
| timeout usage must use the new-style k_timeout_t type and not the |
| legacy/deprecated millisecond counts. |
| |
| * The :c:func:`coap_pending_init` function now accepts an additional ``retries`` |
| parameter, allowing to specify the maximum retransmission count of the |
| confirmable message. |
| |
| * The ``CONFIG_BT_CTLR_CODED_PHY`` is now disabled by default for builds |
| combining both Bluetooth host and controller. |
| |
| * The :c:func:`coap_packet_append_payload` function will now take a pointer to a |
| constant buffer as the ``payload`` argument instead of a pointer to a writable |
| buffer. |
| |
| * The :c:func:`coap_packet_init` function will now take a pointer to a constant |
| buffer as the ``token`` argument instead of a pointer to a writable buffer. |
| |
| * A new :ref:`regulator_api` API has been added to support controlling power |
| sources. Regulators can also be associated with devicetree nodes, allowing |
| drivers to ensure the device they access has been powered up. For simple |
| GPIO-only regulators a devicetree property ``supply-gpios`` is defined as a |
| standard way to identify the control signal in nodes that support power |
| control. |
| |
| * :c:type:`fs_tile_t` objects must now be initialized by calling |
| :c:func:`fs_file_t_init` before their first use. |
| |
| * :c:type:`fs_dir_t` objects must now be initialized by calling |
| :c:func:`fs_dir_t_init` before their first use. |
| |
| Deprecated in this release |
| ========================== |
| |
| * Nordic nRF5340 PDK board deprecated and planned to be removed in 2.6.0. |
| * ARM Musca-A board and SoC support deprecated and planned to be removed in 2.6.0. |
| |
| * DEVICE_INIT was deprecated in favor of utilizing DEVICE_DEFINE directly. |
| |
| * DEVICE_AND_API_INIT was deprecated in favor of DEVICE_DT_INST_DEFINE and |
| DEVICE_DEFINE. |
| |
| * Bluetooth |
| |
| * Deprecated the :c:func:`bt_set_id_addr` function, use :c:func:`bt_id_create` |
| before calling :c:func:`bt_enable` instead. When ``CONFIG_PRIVACY`` is |
| enabled a valid IRK has to be supplied by the application for this case. |
| |
| Removed APIs in this release |
| ============================ |
| |
| * Bluetooth |
| |
| * The deprecated BT_LE_SCAN_FILTER_DUPLICATE define has been removed, |
| use BT_LE_SCAN_OPT_FILTER_DUPLICATE instead. |
| * The deprecated BT_LE_SCAN_FILTER_WHITELIST define has been removed, |
| use BT_LE_SCAN_OPT_FILTER_WHITELIST instead. |
| * The deprecated bt_le_scan_param::filter_dup argument has been removed, |
| use bt_le_scan_param::options instead. |
| * The deprecated bt_conn_create_le() function has been removed, |
| use bt_conn_le_create() instead. |
| * The deprecated bt_conn_create_auto_le() function has been removed, |
| use bt_conn_le_create_auto() instead. |
| * The deprecated bt_conn_create_slave_le() function has been removed, |
| use bt_le_adv_start() instead with bt_le_adv_param::peer set to the remote |
| peers address. |
| * The deprecated BT_LE_ADV_* macros have been removed, |
| use the BT_GAP_ADV_* enums instead. |
| * The deprecated bt_conn_security function has been removed, |
| use bt_conn_set_security instead. |
| * The deprecated BT_SECURITY_* defines NONE, LOW, MEDIUM, HIGH, FIPS have been |
| removed, use the L0, L1, L2, L3, L4 defines instead. |
| * The deprecated BT_HCI_ERR_AUTHENTICATION_FAIL define has been removed, |
| use BT_HCI_ERR_AUTH_FAIL instead. |
| |
| * Kernel |
| |
| * The deprecated k_mem_pool API has been removed entirely (for the |
| past release it was backed by a k_heap, but maintained a |
| compatible API). Now all instantiated heaps must be |
| sys_heap/k_heaps. Note that the new-style heap is a general |
| purpose allocator and does not make the same promises about block |
| alignment/splitting. Applications with such requirements should |
| look at porting their logic, or perhaps at the k_mem_slab utility. |
| |
| Stable API changes in this release |
| ================================== |
| |
| Kernel |
| ****** |
| |
| * Added support for per thread runtime statistics |
| * Added new synchronization mechanisms using Condition Variables |
| * Thread Local Storage (TLS) |
| |
| * Introduced thread local storage support for the following architectures: |
| |
| * ARC |
| * Arm Cortex-M |
| * Arm Cortex-R |
| * AArch64 |
| * RISC-V |
| * Sparc |
| * x86 and x86_64 |
| * Xtensa |
| |
| * This allows variables declared with ``__thread`` keyword to be allocated |
| on a per-thread basis, and every thread has its own copy of these |
| variables. |
| * Enable via :kconfig:option:`CONFIG_THREAD_LOCAL_STORAGE`. |
| * ``errno`` can be stored inside TLS if :kconfig:option:`CONFIG_ERRNO_IN_TLS` |
| is enabled (together with :kconfig:option:`CONFIG_ERRNO`). This allow user |
| threads to access the value of ``errno`` without making a system call. |
| |
| * Memory Management |
| |
| * Added page frame management for physical memory to keep track of |
| the status of each page frame. |
| * Added :c:func:`k_mem_map` which allows applications to increase |
| the data space available via anonymous memory mappings. |
| * Added :c:func:`k_mem_free_get` which returns the amount of |
| physical anonymous memory remaining. |
| * Paging structure must now be pre-allocated so that there is no need |
| to do memory allocations when mapping memory. Because of this, |
| :c:func:`arch_mem_map` may no longer fail. |
| |
| * Demand Paging |
| |
| * Introduced the framework for demand paging and infrastructure for |
| custom eviction algorithms and implementation of backing stores. |
| * Currently the whole kernel is pinned and remaining physical memory |
| can be used for paging. |
| |
| Architectures |
| ************* |
| |
| * ARC |
| |
| * Fixed execution on ARC HS with one interrupt bank and fast interrupts (FIRQ) |
| enabled |
| * Hardened SMP support |
| * Improved mdb west runner to support simulation on SMP nSIM-based |
| configurations |
| * Improved mdb west runner to support nSIM-based configurations execution |
| on real HW (FPGA-based) |
| * Added documentation page with Zephyr support status on ARC processor |
| * Added coverage support for nSIM-based configurations |
| * Switched to upstream OpenOCD for ARC |
| * Various minor fixes/improvements for ARC MWDT toolchain infrastructure |
| |
| * ARM |
| |
| * AARCH32 |
| |
| * Introduced the functionality for chain-loadable Zephyr |
| firmware images to force the initialization of internal |
| architecture state during early system boot (Cortex-M). |
| * Changed the default Floating Point Services mode to |
| Shared FP registers mode. |
| * Enhanced Cortex-M Shared FP register mode by implementing |
| dynamic lazy FP register stacking in threads. |
| * Added preliminary support for Cortex-R7 variant. |
| * Fixed inline assembly code in Cortex-M system calls. |
| * Enhanced and fixed Cortex-M TCS support. |
| * Enabled interrupts before switching to main in single-thread |
| Cortex-M builds (CONFIG_MULTITHREADING=n). |
| * Fixed vector table relocation in non-XIP Cortex-M builds. |
| * Fixed exception exit routine for fatal error exceptions in |
| Cortex-R. |
| * Fixed interrupt nesting in ARMv7-R architecture. |
| |
| |
| * AARCH64 |
| |
| * Fixed registers printing on error and beautified crash dump output |
| * Removed CONFIG_SWITCH_TO_EL1 symbol. By default the execution now drops |
| to EL1 at boot |
| * Deprecated booting from EL2 |
| * Improved assembly code and errors catching in EL3 and EL1 during the |
| start routine |
| * Enabled support for EL0 in the page tables |
| * Fixed vector table alignment |
| * Introduced support to boot Zephyr in NS mode |
| * Fixed alignment fault in z_bss_zero |
| * Added PSCI driver |
| * Added ability to generate image header |
| * Improved MMU code and driver |
| |
| * RISC-V |
| |
| * Added support for PMP (Physical Memory Protection). |
| Integrate PMP in Zephyr allow to support userspace (with shared |
| memory) and stack guard features. |
| |
| * SPARC |
| |
| * Added support for the SPARC architecture, compatible with the SPARC V8 |
| specification and the SPARC ABI. |
| * FPU is supported in both shared and unshared FP register mode. |
| |
| * x86 |
| |
| * Enabled soft float support for Zephyr SDK |
| * ``CONFIG_X86_MMU_PAGE_POOL_PAGES`` is removed as paging structure |
| must now be pre-allocated. |
| * Mapping of physical memory has changed: |
| |
| * This allows a smaller virtual address space thus requiring a smaller |
| paging structure. |
| * Only the kernel image is mapped when :kconfig:option:`CONFIG_ACPI` is not enabled. |
| * When :kconfig:option:`CONFIG_ACPI` is enabled, the previous behavior to map |
| all physical memory is retained as platforms with ACPI are usually not |
| memory constrained and can accommodate bigger paging structure. |
| |
| * Page fault handler has been extended to support demand paging. |
| |
| Boards & SoC Support |
| ******************** |
| |
| * Added support for these SoC series: |
| |
| * Cypress PSoC-63 |
| * Intel Elkhart Lake |
| |
| * Made these changes in other SoC series: |
| |
| * Changes for ARC boards: |
| |
| * Added icount support for ARC QEMU boards |
| * Added MWDT compiler options for HSDK board |
| * Added missing taps into JTAG chain for the dual-core configuration of the |
| HSDK board |
| |
| * Added support for these ARM boards: |
| |
| * Cypress CY8CKIT_062_BLE board |
| |
| * Added support for these x86 boards: |
| |
| * Elkhart Lake CRB board |
| * ACRN configuration on Elkhart Lake CRB board |
| * Slim Bootloader configuration on Elkhart Lake CRB board |
| |
| * Added support for these SPARC boards: |
| |
| * GR716-MINI LEON3FT microcontroller development board |
| * Generic LEON3 board configuration for GRLIB FPGA reference designs |
| * SPARC QEMU for emulating LEON3 processors and running kernel tests |
| |
| * Added support for these NXP boards: |
| |
| * LPCXpresso55S28 |
| * MIMXRT1024-EVK |
| |
| * Added support for these STM32 boards and SoCs : |
| |
| * Cortex-M Trace Reference Board V1.2 (SEGGER TRB STM32F407) |
| * MikroE Clicker 2 for STM32 |
| * STM32F103RCT6 Mini |
| * ST Nucleo F303K8 |
| * ST Nucleo F410RB |
| * ST Nucleo H723ZG |
| * ST Nucleo L011K4 |
| * ST Nucleo L031K6 |
| * ST Nucleo L433RC-P |
| * ST STM32L562E-DK Discovery |
| * STM32F105xx and STM32F103xG SoC variants |
| * STM32G070xx SoC variants |
| * STM32G474xB/C SoC variants |
| * STM32L071xx SoC variants |
| * STM32L151xC and STM32L152xC SoC variants |
| |
| * Made these global changes in STM32 boards and SoC series: |
| |
| * Pin control configuration is now done through devicetree and existing |
| macros to configure pins in pinmux.c files are tagged as deprecated. |
| The new pin settings are provided thanks to .dtsi files distributed in |
| hal_stm32 module. |
| * Generic LL headers, also distributed in hal_stm32 module, are now available |
| to abstract series references in drivers. |
| * Hardware stack protection is now default on all boards with enabled MPU |
| (SRAM > 64K ), excluding F0/G0/L0 series. |
| * West flash STM32CubeProgrammer runner was added as a new option for STM32 |
| boards flashing (to be installed separately). |
| |
| * Made these changes in other boards: |
| |
| * CY8CKIT_062_WIFI_BT_M0: was renamed to CY8CKIT_062_WIFI_BT. |
| * CY8CKIT_062_WIFI_BT_M4: was moved into CY8CKIT_062_WIFI_BT. |
| * CY8CKIT_062_WIFI_BT: Now M0+/M4 are at same common board. |
| * nRF5340 DK: Selected TF-M as the default Secure Processing Element |
| (SPE) when building Zephyr for the non-secure domain. |
| * SAM4E_XPRO: Added support to SAM-BA ROM bootloader. |
| * SAM4S_XPLAINED: Added support to SAM-BA ROM bootloader. |
| * Extended LPCXpresso55S69 to support dual-core. |
| * Enhanced MIMXRT1064-EVK to support QSPI flash storage and LittleFS. |
| * Updated MIMXRT685-EVK to increase the core clock frequency. |
| * Updated NXP i.MX RT, Kinetis, and LPC boards to enable hardware stack |
| protection by default. |
| * Fixed Segger RTT and SystemView support on NXP i.MX RT boards. |
| * Demand paging is turned on by default for ``qemu_x86_tiny``. |
| * Updated zefi.py to use cross-compiler while building Zephyr. |
| * Enabled code coverage report for ``qemu_x86_64``. |
| * Removed support for legacy APIC timer driver. |
| * Added common memory linker for x86 SoCs. |
| * Enabled configuration to reserve the first megabyte in x86 SoCs. |
| |
| * Added support for these following shields: |
| |
| * Inventek es-WIFI shield |
| * Sharp memory display generic shield |
| |
| Drivers and Sensors |
| ******************* |
| |
| * ADC |
| |
| * Added support for ADC on STM32G0 Series. |
| * Introduced the ``adc_sequence_options::user_data`` field. |
| |
| * CAN |
| |
| * We reworked the configuration API. |
| A user can now specify the timing manually (define prop segment, |
| phase segment1, phase segment2, and prescaler) or use a newly introduced |
| algorithm to calculate optimal timing values from a bitrate and sample point. |
| The bitrate and sample point can be specified in the devicetree too. |
| It is possible to change the timing values at runtime now. |
| |
| * We reworked the zcan_frame struct due to undefined behavior. |
| The std_id (11-bit) and ext_id (29-bit) are merged to a single id |
| field (29-bit). The union of both IDs was removed. |
| |
| * We made the CANbus API CAN-FD compatible. |
| The zcan_frame data-field can have a size of >8 bytes now. |
| A flag was introduced to mark a zcan_frame as CAN-FD frame. |
| A flag was introduced that enables a bitrate switch in CAN-FD frames. |
| The configuration API supports an additional timing parameter for the CAN-FD |
| data-phase. |
| |
| * drivers are converted to use the new DEVICE_DT_* macros. |
| |
| * Clock Control |
| |
| * Added NXP LPC driver. |
| |
| * DAC |
| |
| * STM32: Enabled support for G0 and H7 series. |
| * Added TI DACx3608 driver. |
| |
| * DMA |
| |
| * kmalloc was removed from STM32 DMAMUX driver initialization. |
| |
| * EEPROM |
| |
| * Marked the EEPROM API as stable. |
| * Added support for AT24Cxx devices. |
| |
| * Ethernet |
| |
| * Added support for Distributed Switch Architecture (DSA) devices. |
| Currently only ip_k66f board supports DSA. |
| * Added support for w5500 Ethernet controller. |
| * Reworked the NXP MCUX driver to use DT_INST_FOREACH. |
| |
| * Flash |
| |
| * CONFIG_NORDIC_QSPI_NOR_QE_BIT has been removed. The |
| quad-enable-requirements devicetree property should be used instead. |
| * MPU_ALLOW_FLASH_WRITE is now default on STM32 boards when MPU is enabled. |
| * Add driver for STM32H7 and STM32L1 SoC series. |
| * Add QSPI NOR Flash controller support for STM32 family. |
| * Added NXP LPC legacy flash driver. |
| * Added NXP FlexSPI flash driver for i.MX RT SoCs. |
| * Added support for nRF53 Series SoCs in the nRF QSPI NOR flash driver |
| (nrf_qspi_nor). |
| |
| * GPIO |
| |
| * Added Cypress PSoC-6 driver. |
| * Added Atmel SAM4L driver. |
| |
| * Hardware Info |
| |
| * Added Cypress PSoC-6 driver. |
| |
| * I2C |
| |
| * Added driver support for lmx6x, it8xxx2, and npcx7 plaforms. |
| * Added Atmel SAM4L TWIM driver. |
| * Added I2C slave support in the microchip i2c driver. |
| * Reversed 2.4 decision to downgrade I2C eeprom slave driver to a |
| test. It's a driver again. |
| |
| * I2S |
| |
| * IEEE 802.15.4 |
| |
| * nRF: |
| |
| * Added IEEE 802.15.4 support for nRF5340. |
| * Added support for failed rx notification. |
| |
| * cc13xx/cc26xx: |
| |
| * Added multi-protocol radio support. |
| * Added sub-ghz support. |
| * Added raw mode support. |
| |
| * Interrupt Controller |
| |
| * Added Cypress PSoC-6 Cortex-M0+ interrupt multiplexer driver. |
| |
| * memc |
| |
| * Added FMC/SDRAM memory controller for STM32 family |
| |
| * Modem |
| |
| * Improved RX with HW flow control in modem interface API. |
| * Improved reading from interface in command handler. |
| * Fixed race condition when waiting on cmd reply. |
| * Added support for Quectel bg95 modem. |
| * Constified modem command structures to reduce RAM usage. |
| |
| * hl7800: |
| |
| * Fixed buffer handling issues. |
| * Fixed setting DNS address. |
| * Fixed file open in fw update. |
| * Fixed cases where socket would not close. |
| |
| * sara-r4: |
| |
| * Added sanity timeout for @ prompt. |
| * Fixed redundant wait after sendto. |
| * Improved offload_sendmsg() support. |
| * Added Kconfig to configure RSSI work. |
| * Added direct CMD to catch @ when sending data. |
| * Sanitize send_socket_data() semaphore handling. |
| |
| * bg96: |
| |
| * Fixed UDP packet management. |
| |
| * GSM: |
| |
| * Added start/stop API support so that application can turn off |
| the GSM/PPP modem if needed to save power. |
| * Avoid wrapping each byte in muxing headers in PPP. |
| * Added support to remove PPP IPv4 ipcp address on network down. |
| |
| * PECI |
| |
| * Pinmux |
| |
| * STM32 pinmux driver has been reworked to allow pin configuration using |
| devicetree definitions. The previous C macros are now deprecated. |
| |
| * PWM |
| |
| * Added support for generating PWM signal based on RTC in the pwm_nrf5_sw |
| driver. |
| * Added optional API for capturing the PWM pulse width and period. |
| * Added PWM capture driver for the NXP Kinetis Pulse Width Timer (PWT). |
| * Removed the DesignWare and PCA9685 controller drivers. |
| |
| * Sensor |
| |
| * Fixed current conversion to milliamps in the MAX17055 driver. |
| * Added multi-instance support to the FXOS8700, IIS2DLPC, and IIS2ICLX |
| drivers. |
| * Added Invensense ICM42605 driver. |
| * Added NXP MCUX ACMP driver. |
| * Fixed gyro units in the FXAS21002 driver. |
| * Fixed pressure and temperature registers in the DPS310 driver. |
| * Added I2C support to the BMI160 driver. |
| * Added IIS2ICLX driver. |
| * Aligned ST sensor drivers to stmemsc HAL i/f v1.03. |
| * Fixed temperature units in the IIS2MDC driver. |
| * Added emulator for Bosch BMI160 accelerometer. |
| * Added device power management support to the LIS2MDL driver. |
| |
| * Serial |
| |
| * Added ASYNC API support on STM32 family. |
| |
| * SPI |
| |
| * Enhanced NXP MCUX Flexcomm driver to support DMA. |
| |
| * Timer |
| |
| * USB |
| |
| * Reworked nrfx driver to use mem_slab for event elements and |
| and static memory for OUT endpoints. |
| * Fixed ZLP handling for nrfx driver. |
| * Added support for USB Device mode on STM32F105xx parts. |
| |
| * Video |
| |
| * Watchdog |
| |
| * Added NXP i.MX RT driver. |
| |
| * WiFi |
| |
| * eswifi: |
| |
| * Added uart bus interface. This enables all Inventek modules with |
| IWIN AT Commands firmware. |
| |
| * esp: |
| |
| * Fixed thread-safety access on esp_socket operations. |
| * Fixed scheduling each RX packet on separate work thread. |
| * Fixed initializing socket work structures only once. |
| * Reworked +IPD and +CIPRECVDATA handling. |
| * Stopped locking scheduler when sending data. |
| * Added DHCP/Static IP Support. |
| * Added support using DNS servers. |
| * Enhanced CWMODE support. |
| * Added support for configuring hostname. |
| * Added support for power-gpios to enable ESP module. |
| * Added support 32-bit length in +IPD. |
| * Added support for reconfiguring UART baudrate after initial communication. |
| * Improved packet allocation failure handling by closing stream sockets. |
| |
| Networking |
| ********** |
| |
| * CoAP: |
| |
| * Fixed discovery response formatting according to RFC6690. |
| * Randomized initial ACK timeout. |
| * Reworked pending retransmission logic. |
| * Fixed long options encoding. |
| |
| * DHCPv4: |
| |
| * Added start/bound/stop network management events for DHCPv4. |
| * Fixed timeout scheduling with multiple network interfaces. |
| * Fixed timeout on entry to bound state. |
| * Fixed invalid timeout on send failure. |
| * Fixed bounds checking in timeout. |
| * Fixed endian issue. |
| * Added randomization to message interval. |
| * Limited message interval to a maximum of 64 seconds. |
| |
| * DNS: |
| |
| * Added resolving literal IP addresses even when DNS is disabled. |
| * Added support for DNS Service Discovery (dns-sd). |
| * Fixed getaddrinfo() to respect socket type hints. |
| |
| * HTTP: |
| |
| * Added chunked encoding body support to HTTP client API. |
| |
| * IPv6: |
| |
| * Tweaked IPv6 DAD and RS timeout handling. |
| * Fixed multiple endian issues. |
| * Fixed unaligned access to IPv6 address. |
| |
| * LwM2M: |
| |
| * Added dimension discovery support. |
| * Implemented bootstrap discovery. |
| * Fixed message find based on pending/reply. |
| * Reworked bootstrap DELETE operation. |
| * Added path generation macro. |
| * Added a way to notify the application on network error. |
| * Added a callback to notify socket errors to applications. |
| * Send Registration Update on lifetime changes. |
| * Fixed PULL FW update in case of URI parse errors. |
| * Fixed separate response handling. |
| * Start notify sequence numbers on 0. |
| * Enhanced packing of TLV integers more efficiently. |
| * Improved token generation. |
| * Fixed the bootstrap to be optional. |
| |
| * Misc: |
| |
| * Allow user to select pre-emptive or co-operative RX/TX threads. |
| * Refactored RX and TX thread priorities. |
| * Only start the network logging backend if the autostarting is enabled. |
| * Added support for simultaneous UDP/TCP and raw sockets in applications. |
| * Enabled solicit node multicast group registration for Bluetooth IPSP |
| connections. |
| * Added net_buf_remove API to manipulate data at the end of network buffers. |
| * Added checks to syslog-net that ensure immediate logging mode is not set as |
| the network logging is not compatible with it. |
| * Implemented SO_RCVTIMEO socket receive timeout option. |
| * Added support to update unique hostname on link address changes. |
| * Added locking to IPv6, CAN and packet socket bind calls. |
| * Added network management events monitor support. |
| |
| * MQTT: |
| |
| * Reset client state before notifying application with MQTT_EVT_DISCONNECT event. |
| |
| * OpenThread: |
| |
| * Added support for RCP (Radio Co-Processor) mode. |
| * Made radio workqueue stack size configurable. |
| * Added joining thread multicast addresses which are added to Zephyr. |
| * Added SRP Kconfig options. |
| * Enabled CSL and TREL config options. |
| * Added option to enable software CSMA backoff. |
| * Added support to configure platform info. |
| * Added Kconfigs to change values in Zephyr. |
| * Removed unused defines from platform configuration. |
| |
| * Samples: |
| |
| * Added TagoIO IoT Cloud HTTP post sample. |
| * Fixed the return code in MQTT Docker tests. |
| * Added support to allow DHCPv4 or manually set addresses in zperf sample. |
| * Use IPv4 instead of IPv6 in coap-server to support Docker based testing. |
| * Added connection manager support to dumb_http_server_mt sample. |
| * Added support for large file in dumb_http_server_mt sample. |
| * Added support for running the gptp sample X seconds to support Docker based testing. |
| * Added Docker based testing to http_client sample. |
| * Refractored code structure and reduced RAM usage of civetweb sample. |
| * Added suspend/resume shell commands to gsm_modem sample. |
| * Added Docker based testing support to network logging sample. |
| |
| * TCP: |
| |
| * The new TCP stack is enabled by default. Legacy TCP stack is deprecated but |
| still available and scheduled for removal in next 2.6 release. |
| * Added support to queue received out-of-order TCP data. |
| * Added connection termination if the TCP handshake is not finalized. |
| * Enhanced received TCP RST packet handling. |
| * Fixed TCP connection from Windows 10. |
| |
| * TLS: |
| |
| * Use Maximum Fragment Length (MFL) extension by default. |
| * Added ALPN extension option to TLS. |
| * Fixed TLS context leak on socket allocation failure. |
| |
| Bluetooth |
| ********* |
| |
| * Host |
| |
| * When privacy has been enabled in order to advertise towards a |
| privacy-enabled peer the BT_LE_ADV_OPT_DIR_ADDR_RPA option must now |
| be set, same as when privacy has been disabled. |
| |
| * Mesh |
| |
| * The ``bt_mesh_cfg_srv`` structure has been deprecated in favor of a |
| standalone Heartbeat API and Kconfig entries for default state values. |
| |
| |
| * BLE split software Controller |
| |
| * HCI Driver |
| |
| USB |
| *** |
| |
| * USB synchronous transfer |
| |
| * Fixed possible deadlock in usb_transfer_sync(). |
| * Check added to prevent starting new transfer if an other transfer is |
| already ongoing on same endpoint. |
| |
| * USB DFU class |
| |
| * Made USB DFU class compatible with the target configuration that does not |
| have a secondary image slot. |
| * Support to use USB DFU within MCUBoot with single application slot mode. |
| * Separate PID for DFU mode added to avoid problems caused by the host OS |
| caching the remaining descriptors when switching to DFU mode. |
| * Added timer for appDETACH state and revised descriptor handling to |
| to meet specification requirements. |
| |
| * USB HID class |
| |
| * Reworked transfer handling after suspend and resume events. |
| |
| * Samples |
| |
| * Reworked disk and FS configuration in MSC sample. MSC sample can be |
| built with none or one of two supported file systems, LittleFS or FATFS. |
| Disk subsystem can be flash or RAM based. |
| |
| Build and Infrastructure |
| ************************ |
| |
| * Improved support for additional toolchains: |
| |
| * Devicetree |
| |
| * Support for legacy devicetree macros via |
| ``CONFIG_LEGACY_DEVICETREE_MACROS`` was removed. All devicetree-based code |
| should be using the new devicetree API introduced in Zephyr 2.3 and |
| documented in :ref:`dt-from-c`. Information on flash partitions has moved |
| to :ref:`flash_map_api`. |
| * It is now possible to resolve at build time the device pointer associated |
| with a device that is defined in devicetree, via ``DEVICE_DT_GET``. See |
| :ref:`dt-get-device`. |
| * Enhanced support for enumerated property values via new macros: |
| |
| - :c:macro:`DT_ENUM_IDX_OR` |
| - :c:macro:`DT_ENUM_TOKEN` |
| - :c:macro:`DT_ENUM_UPPER_TOKEN` |
| |
| * New hardware specific macros: |
| |
| - :c:macro:`DT_GPIO_CTLR_BY_IDX` |
| - :c:macro:`DT_GPIO_CTLR` |
| - :c:macro:`DT_MTD_FROM_FIXED_PARTITION` |
| |
| * Miscellaneous new node-related macros: |
| |
| - :c:macro:`DT_GPARENT` |
| - :c:macro:`DT_INVALID_NODE` |
| - :c:macro:`DT_NODE_PATH` |
| - :c:macro:`DT_SAME_NODE` |
| |
| * Property access macro changes: |
| |
| - :c:macro:`DT_PROP_BY_PHANDLE_IDX_OR`: new macro |
| - :c:macro:`DT_PROP_HAS_IDX` now expands to a literal 0 or 1, not an |
| expression that evaluates to 0 or 1 |
| |
| * Dependencies between nodes are now exposed via new macros: |
| |
| - :c:macro:`DT_DEP_ORD`, :c:macro:`DT_INST_DEP_ORD` |
| - :c:macro:`DT_REQUIRES_DEP_ORDS`, :c:macro:`DT_INST_REQUIRES_DEP_ORDS` |
| - :c:macro:`DT_SUPPORTS_DEP_ORDS`, :c:macro:`DT_INST_SUPPORTS_DEP_ORDS` |
| |
| * West |
| |
| * Improve bossac runner. It supports now native ROM bootloader for Atmel |
| MCUs and extended SAM-BA bootloader like Arduino and Adafruit UF2. The |
| devices supported depend on bossac version inside Zephyr SDK or in users |
| path. The recommended Zephyr SDK version is 0.12.0 or newer. |
| |
| Libraries / Subsystems |
| ********************** |
| |
| * File systems |
| |
| * API |
| |
| * Added :c:func:`fs_file_t_init` function for initialization of |
| :c:type:`fs_file_t` objects. |
| |
| * Added :c:func:`fs_dir_t_init` function for initialization of |
| :c:type:`fs_dir_t` objects. |
| |
| * ``CONFIG_FS_LITTLEFS_FC_MEM_POOL`` has been deprecated and |
| should be replaced by :kconfig:option:`CONFIG_FS_LITTLEFS_FC_HEAP_SIZE`. |
| |
| * Management |
| |
| * MCUmgr |
| |
| * Added support for flash devices that have non-0xff erase value. |
| * Added optional verification, enabled via |
| :kconfig:option:`CONFIG_IMG_MGMT_REJECT_DIRECT_XIP_MISMATCHED_SLOT`, of an uploaded |
| Direct-XIP binary, which will reject any binary that is not able to boot |
| from base address of offered upload slot. |
| |
| * updatehub |
| |
| * Added support to Network Manager and interface overlays at UpdateHub |
| sample. Ethernet is the default interface configuration and overlays |
| can be used to change default configuration |
| * Added WIFI overlay |
| * Added MODEM overlay |
| * Added IEEE 802.15.4 overlay [experimental] |
| * Added BLE IPSP overlay as [experimental] |
| * Added OpenThread overlay as [experimental]. |
| |
| * Settings |
| |
| * Random |
| |
| * POSIX subsystem |
| |
| * Power management |
| |
| * Use a consistent naming convention using **pm_** namespace. |
| * Overhaul power states. New states :c:enum:`pm_state` are more |
| meaningful and ACPI alike. |
| * Move residency information and supported power states to devicetree |
| and remove related Kconfig options. |
| * New power state changes notification API :c:struct:`pm_notifier` |
| * Cleanup build options. |
| |
| * LVGL |
| |
| * Library has been updated to minor release v7.6.1 |
| |
| * Storage |
| |
| * flash_map: Added API to get the value of an erased byte in the flash_area, |
| see ``flash_area_erased_val()``. |
| |
| * DFU |
| |
| * boot: Reworked using MCUBoot's bootutil_public library which allow to use |
| API implementation already provided by MCUboot codebase and remove |
| zephyr's own implementations. |
| |
| * Crypto |
| |
| * mbedTLS updated to 2.16.9 |
| |
| HALs |
| **** |
| |
| * HALs are now moved out of the main tree as external modules and reside in |
| their own standalone repositories. |
| |
| MCUBoot |
| ******* |
| |
| * bootloader |
| |
| * Added hardening against hardware level fault injection and timing attacks, |
| see ``CONFIG_BOOT_FIH_PROFILE_HIGH`` and similar kconfig options. |
| * Introduced Abstract crypto primitives to simplify porting. |
| * Added ram-load upgrade mode (not enabled for zephy-rtos yet). |
| * Renamed single-image mode to single-slot mode, |
| see ``CONFIG_SINGLE_APPLICATION_SLOT``. |
| * Added patch for turning off cache for Cortex M7 before chain-loading. |
| * Fixed boostrapping in swap-move mode. |
| * Fixed issue causing that interrupted swap-move operation might brick device |
| if the primary image was padded. |
| * Fixed issue causing that HW stack protection catches the chain-loaded |
| application during its early initialization. |
| * Added reset of Cortex SPLIM registers before boot. |
| * Fixesd build issue that occurs if CONF_FILE contains multiple file paths |
| instead of single file path. |
| * Added watchdog feed on nRF devices. See ``CONFIG_BOOT_WATCHDOG_FEED`` option. |
| * Removed the flash_area_read_is_empty() port implementation function. |
| * Initialize the ARM core configuration only when selected by the user, |
| see ``CONFIG_MCUBOOT_CLEANUP_ARM_CORE``. |
| * Allow the final data chunk in the image to be unaligned in |
| the serial-recovery protocol. |
| * Kconfig: allow xip-revert only for xip-mode. |
| * ext: tinycrypt: update ctr mode to stream. |
| * Use minimal CBPRINTF implementation. |
| * Configure logging to LOG_MINIMAL by default. |
| * boot: cleanup NXP MPU configuration before boot. |
| * Fix nokogiri<=1.11.0.rc4 vulnerability. |
| * bootutil_public library was extracted as code which is common API for |
| MCUboot and the DFU application, see ``CONFIG_MCUBOOT_BOOTUTIL_LIB`` |
| |
| * imgtool |
| |
| * Print image digest during verify. |
| * Add possibility to set confirm flag for hex files as well. |
| * Usage of --confirm implies --pad. |
| * Fixed 'custom_tlvs' argument handling. |
| * Add support for setting fixed ROM address into image header. |
| * Fixed verification with protected TLVs. |
| |
| |
| Trusted-Firmware-M |
| ****************** |
| |
| * Synchronized Trusted-Firmware-M module to the upstream v1.2.0 release. |
| |
| Documentation |
| ************* |
| |
| Tests and Samples |
| ***************** |
| |
| * A sample was added to demonstrate how to use the ADC driver API. |
| * Sanitycheck script was renamed to twister |
| |
| Issue Related Items |
| ******************* |
| |
| These GitHub issues were addressed since the previous 2.4.0 tagged |
| release: |
| |
| * :github:`32221` - Sporadic kernel panics on stm32g4 flash erase/writes |
| * :github:`32203` - Cannot set static address when using hci_usb or hci_uart on nRF5340 attached to Linux Host |
| * :github:`32181` - samples: tests: Tests from samples/boards/nrf/nrfx fail |
| * :github:`32179` - samples: tests: Tests from samples/subsys/usb/audio fail |
| * :github:`32112` - intel_adsp_cavs15: a part of testcases run failed with same error |
| * :github:`31819` - intel_adsp_cavs15: signing not correct thus download firmware failed |
| * :github:`31675` - [Coverity CID :216790] Division or modulo by zero in tests/drivers/can/timing/src/main.c |
| * :github:`31607` - Bluetooth: host: bt_conn_auth_cb callbacks are not called when pairing to BLE 4.1 central in BT_SECURITY_L4 mode. |
| * :github:`28685` - Bluetooth: Characteristic unsubscribe under indication load results in ATT timeout |
| * :github:`26495` - Make k_poll work with KERNEL_COHERENCE |
| * :github:`21033` - Read out heap space used and unallocated |
| * :github:`19655` - Milestones toward generalized representation of timeouts |
| * :github:`12028` - Enable 16550 UART driver on x86_64 |
| * :github:`32206` - CMSIS-DSP support seems broken on link |
| * :github:`32194` - Source files missing specification of SPDX-License-Identifier in comments |
| * :github:`32167` - Bluetooth: controller: conformance testcase failures |
| * :github:`32153` - Use of deprecated macro's in dma_iproc_pax_v1, and dma_iproc_pax_v2 |
| * :github:`32152` - DEVICE_AND_API_INIT and DEVICE_INIT deprecation marking is not working |
| * :github:`32151` - Use of deprecated macro's in icm42605 |
| * :github:`32143` - AArch64 idle loop corrupts IRQ state with CONFIG_TRACING |
| * :github:`32142` - dtc: Unrecognized check name "unique_unit_address_if_enabled" |
| * :github:`32136` - z_unpend1_no_timeout non-atomic |
| * :github:`32095` - guiconfig search fails |
| * :github:`32078` - build error with llvm: samples/subsys/fs/littlefs |
| * :github:`32070` - How to manage power consumption when working with peripheral_hr sample on NRF52832 |
| * :github:`32067` - Bluetooth: Mesh: Devkey and addr not stored correctly |
| * :github:`32064` - Minimal libc malloc() is unprotected |
| * :github:`32059` - Getting Started - Windows - Toolchain not found |
| * :github:`32048` - doc: power management: Remove references to previous PM states terminology |
| * :github:`32046` - LMP90xxx ADC driver fails to initialise more than one instance |
| * :github:`32045` - boards: Inaccurate values for ram/flash in nrf5340dk_nrf5340_cpuapp.yaml |
| * :github:`32040` - BT_AUDIO_UNICAST selection rejected in nightly tests |
| * :github:`32033` - Bluetooth mesh : LPN doesn't receive messages from Friend |
| * :github:`32030` - dma: stm32: remove dump stream info in irq |
| * :github:`32015` - Thread local storage is broken when adding more thread variables |
| * :github:`32014` - Is there a sample that uses SAADC (analog to digital converter)? |
| * :github:`32007` - Wrong clock value at USART1 in STM32F2 dtsi file |
| * :github:`32005` - stm32: async uart tests fail |
| * :github:`32002` - Cannot build encrypted images on Zephyr |
| * :github:`31996` - tests/bluetooth/init/bluetooth.init.test_ctlr_peripheral_iso fails to build on a few platforms |
| * :github:`31994` - drivers: flash: stm32h7: fix int/long int warnings |
| * :github:`31989` - nrfx_uarte serial driver does not go to low power mode after setting off state |
| * :github:`31976` - dma: loop_transfer issue on nucleo_wb55rg |
| * :github:`31973` - Stm32 uart async driver changes offset after callback |
| * :github:`31952` - Linking fails with latest master on ARM64 platform |
| * :github:`31948` - tests: drivers: spi: spi_loopback: became skipped whereas it used to be run |
| * :github:`31947` - Cleanup devicetree warnings generated by dtc |
| * :github:`31946` - arm,arm-timer dts compatible should be arm,armv8-timer |
| * :github:`31944` - flashing not working with openocd runner |
| * :github:`31938` - Invalid SPDX license identifier used in file |
| * :github:`31937` - sample.bluetooth.peripheral_hr_rv32m1_vega_ri5cy does not build |
| * :github:`31930` - uart_nrfx_uarte: ``CONFIG_UART_ASYNC_API`` with ``CONFIG_PM_DEVICE`` breaks |
| * :github:`31928` - usb loopback not work on nrf52840 |
| * :github:`31924` - IVSHMEM with ACRN not working |
| * :github:`31921` - west flash not working with pyocd |
| * :github:`31920` - BME280: Use of deprecated ``CONFIG_DEVICE_POWER_MANAGEMENT`` |
| * :github:`31911` - Bluetooth: Mesh: Network buffer overflow on too long proxy messages |
| * :github:`31907` - settings: Unhandled error in NVS backend |
| * :github:`31905` - Question : Friend & Low power node with nRF52840 |
| * :github:`31876` - west signing seems to be broken on windows |
| * :github:`31867` - samples/scheduler/metairq_dispatc failed on iotdk boards |
| * :github:`31858` - xtensa crt1.S hard coding |
| * :github:`31853` - Devicetree API - Getting GPIO details from pin |
| * :github:`31847` - BT ISO channel. error value set, but not returned. |
| * :github:`31836` - Correct values of _msg_len arg in BT_MESH_MODEL_PUB_DEFINE macro |
| * :github:`31835` - Type conflict (uint32_t) vs. (uint32_t:7) leads to overflow (276 vs. 20) |
| * :github:`31822` - tests: drivers: timer: Test drivers.timer.nrf_rtc_timer.stress fails on nrf52 platforms |
| * :github:`31817` - mec15xxevb_assy6853: tests/boards/mec15xxevb_assy6853/i2c_api/ failed |
| * :github:`31807` - USB DFU Broken for STM32L4 |
| * :github:`31800` - west build; west build --board=qemu_x86 fails with "unknown BOARD" |
| * :github:`31797` - need 2.5 release notes on switch to k_heap from mem_pool |
| * :github:`31791` - samples: hello-world: extra slash in path |
| * :github:`31789` - samples/scheduler/metairq_dispatch: Regression after 30916 (sched: timeout: Do not miss slice timeouts) |
| * :github:`31782` - adc: test and sample failed on STM32 |
| * :github:`31778` - Calling k_sem_give causes MPU Fault on nRF52833 |
| * :github:`31769` - Twister: AttributeError: 'NoneType' object has no attribute 'serial_pty' |
| * :github:`31767` - twister: rename variable p |
| * :github:`31749` - fs: fs_opendir can corrupt fs_dir_t object given via zdp parameter |
| * :github:`31741` - tests:subsys_canbus_isotp: mimxrt1060 meet recv timeout |
| * :github:`31735` - intel_adsp_cavs15: use twister to run kernel testcases has no output |
| * :github:`31733` - Unable to build socket can with frdm_k64f |
| * :github:`31729` - test: build fatal related testcase failed on qemu_cortex_m0 and run failed on qemu_nios2 |
| * :github:`31727` - system_off fails to go into soft_off (deep sleep) state on cc1352r1_launchxl |
| * :github:`31726` - RISC-V MIV SoC clock rate is specified 100x too slow |
| * :github:`31721` - tests: nrf: posix: portability.posix.common.tls.newlib fails on nrf9160dk_nrf9160 |
| * :github:`31704` - tests/bluetooth/init/bluetooth.init.test_ctlr_tiny Fails to build on nrf52dk_nrf52832 |
| * :github:`31696` - UP² Celeron version (not the Atom one) has no console |
| * :github:`31693` - Bluetooth: controller: Compilation error when Encryption support is disabled |
| * :github:`31684` - intel_adsp_cavs15: Cannot download firmware of kernel testcases |
| * :github:`31681` - [Coverity CID :216796] Uninitialized scalar variable in tests/subsys/power/power_mgmt/src/main.c |
| * :github:`31680` - [Coverity CID :216795] Unchecked return value in tests/kernel/msgq/msgq_api/src/test_msgq_contexts.c |
| * :github:`31679` - [Coverity CID :216794] Pointless string comparison in tests/lib/devicetree/api/src/main.c |
| * :github:`31678` - [Coverity CID :216793] Division or modulo by zero in tests/ztest/error_hook/src/main.c |
| * :github:`31677` - [Coverity CID :216792] Out-of-bounds access in tests/net/lib/dns_addremove/src/main.c |
| * :github:`31676` - [Coverity CID :216791] Side effect in assertion in tests/lib/p4workq/src/main.c |
| * :github:`31674` - [Coverity CID :216788] Explicit null dereferenced in tests/ztest/error_hook/src/main.c |
| * :github:`31673` - [Coverity CID :216787] Wrong sizeof argument in tests/kernel/mem_heap/mheap_api_concept/src/test_mheap_api.c |
| * :github:`31672` - [Coverity CID :216786] Side effect in assertion in tests/kernel/threads/thread_apis/src/test_threads_cancel_abort.c |
| * :github:`31671` - [Coverity CID :216785] Side effect in assertion in tests/lib/p4workq/src/main.c |
| * :github:`31670` - [Coverity CID :216783] Side effect in assertion in tests/lib/p4workq/src/main.c |
| * :github:`31669` - [Coverity CID :215715] Unchecked return value in tests/subsys/fs/littlefs/src/testfs_mount_flags.c |
| * :github:`31668` - [Coverity CID :215714] Unchecked return value in tests/subsys/fs/fs_api/src/test_fs_mount_flags.c |
| * :github:`31667` - [Coverity CID :215395] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31666` - [Coverity CID :215394] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31665` - [Coverity CID :215393] Argument cannot be negative in tests/net/lib/dns_sd/src/main.c |
| * :github:`31664` - [Coverity CID :215390] Argument cannot be negative in tests/net/lib/dns_sd/src/main.c |
| * :github:`31663` - [Coverity CID :215389] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31662` - [Coverity CID :215388] Argument cannot be negative in tests/net/lib/dns_sd/src/main.c |
| * :github:`31661` - [Coverity CID :215387] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31660` - [Coverity CID :215385] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31659` - [Coverity CID :215384] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31658` - [Coverity CID :215383] Argument cannot be negative in tests/net/lib/dns_sd/src/main.c |
| * :github:`31657` - [Coverity CID :215382] Operands don't affect result in tests/net/lib/dns_sd/src/main.c |
| * :github:`31656` - [Coverity CID :215380] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31655` - [Coverity CID :215378] Argument cannot be negative in tests/net/lib/dns_sd/src/main.c |
| * :github:`31654` - [Coverity CID :215377] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31653` - [Coverity CID :215375] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31652` - [Coverity CID :215374] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31651` - [Coverity CID :215371] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31650` - [Coverity CID :215370] Argument cannot be negative in tests/net/lib/dns_sd/src/main.c |
| * :github:`31649` - [Coverity CID :215369] Out-of-bounds access in tests/net/lib/dns_sd/src/main.c |
| * :github:`31648` - [Coverity CID :216800] Operands don't affect result in lib/os/heap.c |
| * :github:`31647` - [Coverity CID :216789] Wrong sizeof argument in include/kernel.h |
| * :github:`31646` - [Coverity CID :215712] Assignment of overlapping memory in lib/os/cbprintf_complete.c |
| * :github:`31645` - [Coverity CID :215711] Wrong sizeof argument in include/kernel.h |
| * :github:`31644` - [Coverity CID :216798] Unused value in subsys/net/lib/sockets/socketpair.c |
| * :github:`31643` - [Coverity CID :215372] Logically dead code in subsys/net/lib/sockets/sockets_tls.c |
| * :github:`31642` - [Coverity CID :216784] Uninitialized scalar variable in drivers/can/can_common.c |
| * :github:`31640` - mcuboot build is broken |
| * :github:`31631` - x86: ehl_crb_sbl: Booting fails with Slim Bootloader |
| * :github:`31630` - Incorrect configuration override option for west flash |
| * :github:`31629` - mcumgr-cli image upload is failing on shell channel after MCUBOOT_BOOTUTIL library was introduced |
| * :github:`31627` - tests/subsys/power/power_mgmt/subsys.power.device_pm fails to build on nrf5340dk_nrf5340_cpunet & nrf5340pdk_nrf5340_cpunet |
| * :github:`31616` - test: ipc: Test from samples/subsys/ipc/rpmsg_service fails on nrf5340dk_nrf5340_cpuapp |
| * :github:`31614` - drivers: clock_control: Kconfig.stm32xxx PLL div range for each serie |
| * :github:`31613` - Undefined reference errors when using External Library with k_msgq_* calls |
| * :github:`31609` - CoAP discovery response does not follow CoRE link format specification |
| * :github:`31599` - 64 bit race on timer counter in cavs_timer |
| * :github:`31584` - Twister: json reports generation takes too much time |
| * :github:`31582` - STM32F746ZG: No pwm signal output when running /tests/drivers/pwm/pwm_api |
| * :github:`31579` - sam_e70_xplained: running tests/subsys/logging/log_core failed |
| * :github:`31573` - Wrong log settings in can_stm32 driver |
| * :github:`31569` - lora: sx126x: interrupt pin permanently enabled |
| * :github:`31567` - lora: SX126x modems consume excess power until used for first time |
| * :github:`31566` - up_squared: Couldn't get testcase log from console for all testcases. |
| * :github:`31562` - unexpected sign-extension in Kconfig linker symbols on 64-bit platforms |
| * :github:`31560` - Fix incorrect usage of default in dts bindings |
| * :github:`31555` - tests:drivers_can_api: mimxrt1060 can api test meet assert failure |
| * :github:`31551` - lorawan: setting datarate does not allow sending larger packets |
| * :github:`31549` - tests/kernel/lifo/lifo_usage/kernel.lifo.usage fails on m2gl025_miv |
| * :github:`31546` - DTS device dependency is shifting memory addresses between builds |
| * :github:`31543` - Documentation: Spelling |
| * :github:`31531` - STM32 can driver don't set prescaler |
| * :github:`31528` - introduction of demand paging support causing qemu failures on x86_64, qemu_x86_64_nokpti |
| * :github:`31524` - littlefs: Too small heap for file cache. |
| * :github:`31517` - UP² broken (git bisect findings inside) |
| * :github:`31511` - AArch32 exception exit routine behaves incorrectly on fatal exceptions |
| * :github:`31510` - Some drivers return invalid z_timer_cycle_get_32() value |
| * :github:`31508` - up_squared: tests/kernel/sched/deadline/ failed. |
| * :github:`31505` - qemu_cortex_m0: Cmake build failure |
| * :github:`31504` - qemu_cortex_m0: Cmake build failure |
| * :github:`31502` - it8xxx2_evb should not define TICKLESS_CAPABLE |
| * :github:`31488` - build failure w/twister and SDK 0.12.1 related to |
| * :github:`31486` - make htmldocs-fast not working in development workspace |
| * :github:`31485` - west flash --runner=jlink should raise error when CONFIG_BUILD_OUTPUT_BIN=n |
| * :github:`31472` - tests: kernel: poll: timeout with FPU enabled |
| * :github:`31467` - samples: bluetooth: peripheral_hids: Pairing fails on the nucleo_wb55rg board. |
| * :github:`31444` - Error in include/net/socket_select.h |
| * :github:`31439` - nrf5340dk_nrf5340_cpunet configuring incomplete |
| * :github:`31436` - compliance script broken |
| * :github:`31433` - samples/bluetooth/hci_pwr_ctrl stack overflow on nRF52DK_nRF52832 |
| * :github:`31419` - tests/ztest/error_hook failed on ARC boards |
| * :github:`31414` - samples/net/mqtt_publisher link error: undefined reference to ``z_impl_sys_rand32_get`` |
| * :github:`31400` - Extending ``zephyr,code-partition`` with ``zephyr,code-header-size`` |
| * :github:`31386` - sam_e70b_xplained: running tests/drivers/watchdog/wdt_basic_api/ timeout for v1.14-branch |
| * :github:`31385` - ARC version of sys_read32 only reads uint16_t on Zephyr v2.4 |
| * :github:`31379` - Update CAN-API Documentation |
| * :github:`31370` - Question about serial communication using virtual COM |
| * :github:`31362` - kconfiglib.py _save_old() may rename /dev/null -- replacing /dev/null with a file |
| * :github:`31358` - ``west build`` might destroy your repository, as it is defaulting doing pristine. |
| * :github:`31344` - iotdk: running tests/ztest/error_hook/ failed |
| * :github:`31343` - sam_e70_xplained: running tests/net/socket/af_packet/ failed |
| * :github:`31342` - sam_e70_xplained: running tests/net/ptp/clock/ failed |
| * :github:`31340` - sam_e70_xplained: running tests/subsys/logging/log_core/ failed |
| * :github:`31339` - nsim_em: running tests/ztest/error_hook/ failed |
| * :github:`31338` - mimxrt1050_evk: running tests/kernel/fpu_sharing/float_disable/ failed |
| * :github:`31333` - adding a periodic k_timer causes k_msleep to never return in tests/kernel/context |
| * :github:`31330` - Getting started guide outdated: Step 4 - Install a toolchain |
| * :github:`31327` - ci compliance failures due to intel_adsp_cavs25 sample |
| * :github:`31316` - Issue in UDP management for BG96 |
| * :github:`31308` - Cannot set static address when using hci_usb or hci_uart on nRF5340 attached to Linux Host |
| * :github:`31301` - intel_adsp_cavs15: run kernel testcases failed. |
| * :github:`31289` - Problems building grub2 bootloader for Zephyr |
| * :github:`31285` - LOG resulting in incorrect output |
| * :github:`31282` - Kernel: Poll: Code Suspected Logic Problem |
| * :github:`31272` - CANOpen Sample compilation fails |
| * :github:`31262` - tests/kernel/threads/tls/kernel.threads.tls.userspace failing |
| * :github:`31259` - uart.h: Clarification required on uart_irq_tx_ready uart_irq_rx_ready |
| * :github:`31258` - watch dog (WWDT) timeout calculation for STM32 handles biggest timeout and rollover wrong |
| * :github:`31235` - Cortex-M: vector table relocation is incorrect with XIP=n |
| * :github:`31234` - twister: Add choice for tests sorting into subsets |
| * :github:`31226` - tests/drivers/dma/loop_transfer does not use ztest |
| * :github:`31219` - newlib printk float formatting not working |
| * :github:`31207` - Non-existent event in asynchronous UART API |
| * :github:`31206` - coap.c : encoding of options with lengths larger than 268 is not proper |
| * :github:`31203` - fatal error: setjmp.h: No such file or directory |
| * :github:`31194` - twister: using unsupported fixture without defined harness causes an infinite loop during on-target test execution |
| * :github:`31168` - Wrong linker option syntax for printf and scanf with float support |
| * :github:`31158` - Ethernet (ENC424J600) with dumb_http_server_mt demo does not work |
| * :github:`31153` - twister build of samples/audio/sof/sample.audio.sof fails on most platforms |
| * :github:`31145` - Litex-vexriscv address misaligned with dumb_http_server example |
| * :github:`31143` - samples: audio: sof: compilation issue, include file not found. |
| * :github:`31137` - Seems like the rule ".99 tag to signify major work started, minor+1 started " not used anymore ? |
| * :github:`31134` - LittleFS: Error Resizing the External QSPI NOR Flash in nRF52840dk |
| * :github:`31114` - Bluetooth: Which coding (S2 vs S8) is used during advertising on Coded PHY? |
| * :github:`31100` - Recvfrom not returning -1 if UDP and len is too small for packet. |
| * :github:`31091` - usb: usb_transfer_sync deadlocks on disconnect/cancel transfer |
| * :github:`31086` - bluetooth: Resume peripheral's advertising after disconnection when using new bt_le_ext_adv_* API |
| * :github:`31085` - networking / openthread: ipv6 mesh-local all-nodes multicast (ff03::1) packets are dropped by zephyr ipv6 stack |
| * :github:`31079` - Receiving extended scans on an Adafruit nRF 52840 |
| * :github:`31071` - board: arm: SiliconLabs: add support to development kit efm32pg_stk3401a |
| * :github:`31069` - net: buf: remove data from end of buffer |
| * :github:`31067` - usb: cdc_acm: compilation error without UART |
| * :github:`31055` - nordic: west flash no longer supports changing ``CONFIG_GPIO_PINRESET`` when flashing |
| * :github:`31053` - LwM2M FOTA pull not working with modem (offloaded socket) driver using UART |
| * :github:`31044` - sample.bluetooth.peripheral_hr build fails on rv32m1_vega_ri5cy |
| * :github:`31110` - How can I overwrite west build in command? |
| * :github:`31028` - Cannot READ_BIT(RCC->CR, RCC_CR_PLL1RDY) on STM32H743 based board |
| * :github:`31027` - Google tests run twice |
| * :github:`31020` - CI build failed on intel_adsp_cavs18 when submitted a PR |
| * :github:`31019` - Bluetooth: Mesh: Thread competition leads to failure to open or close the scanning. |
| * :github:`31018` - up_squared: tests/kernel/pipe/pipe_api failed. |
| * :github:`31014` - Incorrect timing calculation in can_mcux_flexcan |
| * :github:`31008` - error: initializer element is not constant .attr = K_MEM_PARTITION_P_RX_U_RX |
| * :github:`30999` - updatehub with openthread build update pkg failed |
| * :github:`30997` - samples: net: sockets: echo_client: posix tls example |
| * :github:`30989` - driver : STM32 Ethernet : Pin definition for PH6 |
| * :github:`30979` - up_squared_adsp: Twister can not capture testcases log correctly |
| * :github:`30972` - USB: SET_ADDRESS logic error |
| * :github:`30964` - Sleep calls are off on qemu_x86 |
| * :github:`30961` - esp32 broken by devicetree device updates |
| * :github:`30955` - Bluetooth: userchan: k_sem_take failed with err -11 |
| * :github:`30938` - samples/net/dhcpv4_client does not work with sam_e70_xplained |
| * :github:`30935` - tests: net: sockets: tcp: add a tls tests |
| * :github:`30921` - west flash failed with an open ocd error |
| * :github:`30918` - up_squared: tests/kernel/mem_protect/mem_protect failed. |
| * :github:`30893` - Remove LEGACY_TIMEOUT_API |
| * :github:`30872` - Convert Intel GNA driver to devicetree |
| * :github:`30871` - "warning: compound assignment with 'volatile'-qualified left operand is deprecated" when building with C++20 |
| * :github:`30870` - Convert Intel DMIC to devicetree |
| * :github:`30869` - Convert designware PWM driver to devicetree |
| * :github:`30862` - Nordic system timer driver incompatible with LEGACY_TIMEOUT_API |
| * :github:`30860` - legacy timeout ticks mishandled |
| * :github:`30857` - SDRAM not working on STM32H747I-DISCO |
| * :github:`30850` - iotdk: couldn't flash image into iotdk board using west flash. |
| * :github:`30846` - devicetree: unspecified phandle-array elements cause errors |
| * :github:`30822` - designator order for field 'zcan_filter::rtr' does not match declaration order in 'const zcan_filter' |
| * :github:`30819` - twister: --generate-hardware-map crashes and deletes map |
| * :github:`30810` - tests: kernel: kernel.threads.armv8m_mpu_stack_guard fails on nrf9160dk |
| * :github:`30809` - new testcase is failing after 3f134877 on mec1501modular_assy6885 |
| * :github:`30808` - Blueooth: Controller Response COMMAND DISALLOWED |
| * :github:`30805` - Build error at tests/kernel/queue in mec15xxevb_assy6853(qemu) platform |
| * :github:`30800` - STM32 usb clock from PLLSAI1 |
| * :github:`30792` - Cannot build network echo_server for nucleo_f767zi |
| * :github:`30752` - ARC: passed tests marked as failed when running sanitycheck on nsim_* platforms |
| * :github:`30750` - Convert i2s_cavs to devicetree |
| * :github:`30736` - Deadlock with usb_transfer_sync() |
| * :github:`30730` - tests: nrf: Tests in tests/drivers/timer/nrf_rtc_timer are flaky |
| * :github:`30723` - libc: malloc() returns unaligned pointer, causes CPU exception |
| * :github:`30713` - doc: "Variable ZEPHYR_TOOLCHAIN_VARIANT is not defined" |
| * :github:`30712` - "make zephyr_generated_headers" regressed again - ";" separator for Z_CFLAGS instead of spaces |
| * :github:`30705` - STM32 PWM driver generates signal with wrong frequency on STM32G4 |
| * :github:`30702` - Shell module broken on LiteX/VexRiscv after release zephyr-v2.1.0 |
| * :github:`30698` - OpenThread Kconfigs should more closely follow Zephyr Kconfig recommendations |
| * :github:`30688` - Using openthread based lwm2m_client cannot ping the external network address unless reset once |
| * :github:`30686` - getaddrinfo() does not respect socket type |
| * :github:`30685` - reel_board: tests/kernel/fatal/exception/ failure |
| * :github:`30683` - intel_adsp_cavs15:running tests/kernel/sched/schedule_api failed |
| * :github:`30679` - puncover worst-case stack analysis does not work |
| * :github:`30673` - cmake: zephyr_module.cmake included before ZEPHYR_EXTRA_MODULES is evaluated |
| * :github:`30663` - Support for TI's TMP117 Temperature Sensor. |
| * :github:`30657` - BT Mesh: Friendship ends if LPN publishes to a VA it is subscribed to |
| * :github:`30651` - sanitycheck samples/video/capture/sample.video.capture fails to build on mimxrt1064_evk |
| * :github:`30649` - Trouble with gpio callback on frdm k64f |
| * :github:`30638` - nrf pwm broken |
| * :github:`30636` - TCP stack locks irq's for too long |
| * :github:`30634` - frdm_kw41z: Current master fails compilation in drivers/pwm/pwm_mcux_tpm.c |
| * :github:`30624` - BLE : ATT Timeout occurred during multilink central connection |
| * :github:`30591` - build RAM usage printout uses prebuilt and not final binary |
| * :github:`30582` - Doxygen doesn't catch errors in argument names in callback functions that are @typedef'd |
| * :github:`30574` - up_squared: tests/kernel/semaphore/semaphore failed. |
| * :github:`30573` - up_squared: slowdown on test execution and timing out on multiple tests |
| * :github:`30566` - flashing issue with ST Nucleo board H745ZI-Q |
| * :github:`30557` - i2c slave driver removed |
| * :github:`30554` - tests/kernel/fatal/exception/sentinel test is failing for various nrf platforms |
| * :github:`30553` - kconfig.py exits with error when using multiple shields |
| * :github:`30548` - reel_board: tests/net/ieee802154/l2/ build failure |
| * :github:`30547` - reel_board: tests/net/ieee802154/fragment/ build failure |
| * :github:`30546` - LwM2M Execute arguments currently not supported |
| * :github:`30541` - l2m2m: writing to resources with pre_write callback fails |
| * :github:`30531` - When using ccache, compiler identity stored in ToolchainCapabilityDatabase is always the same |
| * :github:`30526` - tests: drivers: timer: Tests from drivers.timer.nrf_rtc_timer.basic fail on all nrf platforms |
| * :github:`30517` - Interrupt nesting is broken on ARMv7-R / LR_svc corrupted. |
| * :github:`30514` - reel_board: tests/benchmarks/sys_kernel/ fails |
| * :github:`30513` - reel_board: tests/benchmarks/latency_measure/ fails |
| * :github:`30509` - k_timer_remaining_get returns incorrect value on long timers |
| * :github:`30507` - nrf52_bsim fails on some tests after merging 29810 |
| * :github:`30488` - Bluetooth: controller: swi.h should use CONFIG_SOC_NRF5340_CPUNET define |
| * :github:`30486` - updatehub demo for nrf52840dk |
| * :github:`30483` - Sanitycheck: When platform is nsim_hs_smp, process "west flash" become defunct, the grandchild "cld" process can't be killed |
| * :github:`30480` - Bluetooth: Controller: Advertising can only be started 2^16 times |
| * :github:`30477` - frdm_k64f: testcase samples/subsys/canbus/canopen/ failed to be ran |
| * :github:`30476` - frdm_k64f: testcase samples/net/cloud/tagoio_http_post/ failed to be ran |
| * :github:`30475` - frdm_k64f: testcase tests/kernel/fatal/exception/ failed to be ran |
| * :github:`30473` - mimxrt1050_evk: testcase tests/kernel/fatal/exception/ failed to be ran |
| * :github:`30472` - sam_e70_xplained: the samples/net/civetweb/http_server/. waits for interface unitl timeout |
| * :github:`30470` - sam_e70_xplained: tesecase tests/subsys/log_core failed to run |
| * :github:`30468` - mesh: cfg_svr.c app_key_del passes an incorrect parameter |
| * :github:`30467` - replace device define macros with devicetree-based macro |
| * :github:`30446` - fxas21002 gyroscope reading is in deg/s |
| * :github:`30435` - NRFX_CLOCK_EVT_HFCLKAUDIO_STARTED not handled in clock_control_nrf.c |
| * :github:`30434` - Memory map executing test case failed when code coverage enabled in x86_64 platform |
| * :github:`30433` - zephyr client automatic joiner failed on nRF52840dk |
| * :github:`30432` - No network interface was found when running socketcan sample |
| * :github:`30426` - Enforce all checkpatch warnings and move to 100 characters per line |
| * :github:`30423` - Devicetree: Child node of node on SPI bus itself needs reg property - Bug? |
| * :github:`30418` - Logging: Using asserts with LOG in high pri ISR context blocks output |
| * :github:`30408` - tests/kernel/sched/schedule_api is failing after 0875740 on m2gl025_miv |
| * :github:`30397` - tests:latency_measure is not counting semaphore results on the ARM boards |
| * :github:`30394` - TLS tests failing with sanitycheck (under load) |
| * :github:`30393` - kernel.threads.tls.userspace fails with SDK 0.12.0-beta on ARM Cortex-M |
| * :github:`30386` - Building confirmed images does not work |
| * :github:`30384` - Scheduler doesn't activate sleeping threads on native_posix |
| * :github:`30380` - Improve the use of CONFIG_KERNEL_COHERENCE |
| * :github:`30378` - Bluetooth: controller: tx buffer overflow error |
| * :github:`30364` - TCP2 does not implement queing for incoming packets |
| * :github:`30362` - adc_read_async callback parameters are dereferenced pointers, making use of CONTAINER_OF impossible |
| * :github:`30360` - reproducible qemu_x86_64 SMP failures |
| * :github:`30356` - DAC header file not included in stm32 soc.h |
| * :github:`30354` - Regression with 'local-mac-address' enet DTS property parsing (on i.MX K6x) |
| * :github:`30349` - Memory protection unit fault when running socket CAN program |
| * :github:`30344` - Bluetooth: host: Add support for multiple advertising sets for legacy advertising |
| * :github:`30338` - BT Mesh LPN max. poll timeout calculated incorrectly |
| * :github:`30330` - tests/subsys/usb/bos/usb.bos fails with native_posix and llvm/clang |
| * :github:`30328` - Openthread build issues with clang/llvm |
| * :github:`30322` - tests: benchmarks: latency_measure: timing measurement values are all 0 |
| * :github:`30316` - updatehub with openthread |
| * :github:`30315` - Build failure: zephyr/include/generated/devicetree_unfixed.h:627:29: error: 'DT_N_S_leds_S_led_0_P_gpios_IDX_0_PH_P_label' undeclared |
| * :github:`30308` - Add optional user data field to device structure |
| * :github:`30307` - up_squared: tests/kernel/device/ failed. |
| * :github:`30306` - up_squared: tests/kernel/mem_protect/userspace failed. |
| * :github:`30305` - up_squared: tests/kernel/mem_protect/mem_protect failed. |
| * :github:`30304` - NRF52832 consumption too high 220uA |
| * :github:`30298` - regression/change in master: formatting floats and doubles |
| * :github:`30276` - Sanitycheck: can't find mdb.pid |
| * :github:`30275` - up_squared: tests/kernel/common failed (timeout error) |
| * :github:`30261` - File no longer at this location |
| * :github:`30257` - test: kernel: Test kernel.common.stack_protection_arm_fpu_sharing.fatal fails on nrf52 platforms |
| * :github:`30253` - tests: kernel: Test kernel.memory_protection.gap_filling fails on nrf5340dk_nrf5340_cpuapp |
| * :github:`30372` - WEST Support clean build |
| * :github:`30373` - out of tree （board soc doc subsystem ...) |
| * :github:`30240` - Bluetooth: Mesh: PTS Test failed in friend node |
| * :github:`30235` - MbedTLS X509 certificate not parsing |
| * :github:`30232` - CMake 3.19 doesn't work with Zephyr (tracking issue w/upstream CMake) |
| * :github:`30230` - printk and power management incompatibility |
| * :github:`30229` - BinaryHandler has no pid file |
| * :github:`30224` - stm32f4_disco: User button press is inverted |
| * :github:`30222` - boards: arm: nucleo_wb55rg: fails to build basic samples |
| * :github:`30219` - drivers: gpio: gpio_cc13xx_cc26xx: Add drive strength configurability |
| * :github:`30213` - usb: tests: Test usb.device.usb.device.usb_disable fails on nrf52840dk_nrf52840 |
| * :github:`30211` - spi nor sfdp runtime: nph offset |
| * :github:`30207` - Mesh_demo with a nRF52840 not working |
| * :github:`30205` - Missing error check of function i2c_write_read() and dac_write_value() |
| * :github:`30194` - qemu_x86 crashes when printing floating point. |
| * :github:`30193` - reel_board: running tests/subsys/power/power_mgmt_soc failed |
| * :github:`30191` - Missing checks of return values of settings_runtime_set() |
| * :github:`30189` - Missing error check of function sensor_trigger_set() |
| * :github:`30187` - usb: stm32: MCU fall in deadlock when calling sleep API during USB transfer |
| * :github:`30183` - undefined reference to ``ring_buf_item_put`` |
| * :github:`30179` - out of tree （board soc doc subsystem ...） |
| * :github:`30178` - Is there any plan to support NXP RT600 HIFI4 DSP in the zephyr project? |
| * :github:`30173` - OpenThread SED cannot join the network after "Update nRF5 ieee802154 driver to v1.9" |
| * :github:`30157` - SW based BLE Link Layer Random Advertise delay not as expected |
| * :github:`30153` - BSD recv() can not received huge package(may be 100kB) sustain . |
| * :github:`30148` - STM32G474: Write to flash Bank 2 address 0x08040000 does not work in 256K flash version |
| * :github:`30141` - qemu_x86 unexpected thread behavior |
| * :github:`30137` - TCP2: Handling of RST flag from server makes poll() call unable to return indefinitely |
| * :github:`30135` - LWM2M: Firmware URI writing does not work anymore |
| * :github:`30134` - tests: drivers: uart: Tests from tests/drivers/uart/uart_mix_fifo_poll fails on nrf platforms |
| * :github:`30133` - sensor: driver: lis2dh interrupt definitions |
| * :github:`30130` - nrf_radio_power_set() should use bool |
| * :github:`30129` - TCP2 send test |
| * :github:`30126` - xtensa-asm2-util.s hard coding |
| * :github:`30120` - sanitycheck fails for tests/bluetooth/init/bluetooth.init.test_ctlr_per_sync |
| * :github:`30117` - Cannot compile Zephyr project with standard macros INT8_C, UINT8_C, UINT16_C |
| * :github:`30106` - Refactor zcan_frame. |
| * :github:`30100` - twister test case selection numbers don't make any sense |
| * :github:`30099` - sanitycheck --build-only gets stuck |
| * :github:`30098` - > very few are even tested with CONFIG_NO_OPTIMIZATIONS. What is the general consensus about this? |
| * :github:`30094` - tests: kernel: fpu_sharing: Tests in tests/kernel/fpu_sharing fail on nrf platforms |
| * :github:`30075` - dfu: mcuboot: fail to build with CONFIG_BOOTLOADER_MCUBOOT=n and CONFIG_IMG_MANAGER=y |
| * :github:`30072` - tests/net/socket/socketpair appears to mis-use work queue APIs |
| * :github:`30066` - CI test build with RAM overflow |
| * :github:`30057` - LLVM built application crash |
| * :github:`30037` - Documentation: Fix getting started guide for macOS around homebrew install |
| * :github:`30031` - stm32f4 usb - bulk in endpoint does not work |
| * :github:`30029` - samples: net: cloud: tagoio_http_post: Undefined initialization levels used. |
| * :github:`30028` - sam_e70_xplained: MPU fault with CONFIG_NO_OPTIMIZATIONS=y |
| * :github:`30027` - sanitycheck failures on ``tests/bluetooth/init/bluetooth.init.test_ctlr_peripheral_ext`` |
| * :github:`30022` - The mailbox message.info in the receiver thread is not updated. |
| * :github:`30014` - STM32F411RE PWM support |
| * :github:`30010` - util or toolchain: functions for reversing bits |
| * :github:`29999` - nrf52840 Slave mode is not supported on SPI_0 |
| * :github:`29997` - format specifies type 'unsigned short' but the argument has type 'int' error in network stack |
| * :github:`29995` - Bluetooth: l2cap: L2CAP/LE/REJ/BI-02-C test failure |
| * :github:`29994` - High bluetooth ISR latency with CONFIG_BT_MAX_CONN=2 |
| * :github:`29992` - dma tests fail with stm32wb55 and stm32l476 nucleo boards |
| * :github:`29991` - Watchdog Example not working as expected on a Nordic chip |
| * :github:`29977` - nrf9160: use 32Mhz HFCLK |
| * :github:`29969` - sanitycheck fails on tests/benchmarks/latency_measure/benchmark.kernel.latency |
| * :github:`29968` - sanitycheck fails a number of bluetooth tests on NRF |
| * :github:`29967` - sanitycheck fails to build samples/bluetooth/peripheral_hr/sample.bluetooth.peripheral_hr_rv32m1_vega_ri5cy |
| * :github:`29964` - net: lwm2m: Correctly Support Bootstrap-Delete Operation |
| * :github:`29963` - RFC: dfu/boot/mcuboot: consider usage of boootloader/mcuboot code |
| * :github:`29961` - Add i2c driver tests for microchip evaluation board |
| * :github:`29960` - Checkpatch compliance errors do not fail CI |
| * :github:`29958` - mcuboot hangs when CONFIG_BOOT_SERIAL_DETECT_PORT value not found |
| * :github:`29957` - BLE Notifications limited to 1 per connection event on Zephyr v2.4.0 Central |
| * :github:`29954` - intel_adsp_cavs18 fails with heap errors on current Zephyr |
| * :github:`29953` - Add the sofproject as a module |
| * :github:`29951` - ieee802154: cc13xx_cc26xx: raw mode support |
| * :github:`29945` - Missing error check of function sensor_sample_fetch() and sensor_channel_get() |
| * :github:`29943` - Missing error check of function isotp_send() |
| * :github:`29937` - XCC Build offsets.c ：FAILED |
| * :github:`29936` - XCC Build isr_tables.c fail |
| * :github:`29925` - pinctrl error for disco_l475_iot1 board: |
| * :github:`29921` - USB DFU with nrf52840dk (PCA10056) |
| * :github:`29916` - ARC: tests fail on nsim_hs with one register bank |
| * :github:`29913` - Question : Bluetooth mesh using long range |
| * :github:`29908` - devicetree: Allow all GPIO flags to be used by devicetree |
| * :github:`29896` - new documentation build warning |
| * :github:`29891` - mcumgr image upload (with smp_svr) does not work over serial/shell on the nrf52840dk |
| * :github:`29884` - x_nucleo_iks01a2 device tree overlay issue with stm32mp157c_dk2 board |
| * :github:`29883` - drivers: ieee802154: cc13xx_cc26xx: use multi-protocol radio patch |
| * :github:`29879` - samples/net/gptp compile failed on frdm_k64f board in origin/master (work well in origin/v2.4-branch) |
| * :github:`29877` - WS2812 SPI LED strip driver produces bad SPI data |
| * :github:`29869` - Missing error check of function entropy_get_entropy() |
| * :github:`29868` - Bluetooth: Mesh: DST not checked on send |
| * :github:`29858` - [v1.14, v2.4] Bluetooth: Mesh: RPL cleared on LPN disconnect |
| * :github:`29855` - Bluetooth: Mesh: TTL max not checked on send |
| * :github:`29853` - multiple PRs fail doc checks |
| * :github:`29842` - 'imgtool' absent in requirements.txt |
| * :github:`29833` - Test DT_INST_PROP_HAS_IDX() inside the macros for multi instances |
| * :github:`29831` - flash support for stm32h7 SoC |
| * :github:`29829` - On-PR CI needs to build a subset of tests for a subset of platforms regardless of the scope of the PR changes |
| * :github:`29826` - SNTP doesn't work on v2.4.0 on eswifi |
| * :github:`29822` - Redundant error check of function usb_set_config() in subsys/usb/class/usb_dfu.c |
| * :github:`29809` - gen_isr_tables.py does not check that the IRQ number is in bounds |
| * :github:`29805` - SimpleLink does not compile (simplelink_sockets.c) |
| * :github:`29796` - Zephyr API for writing to flash for STM32G474 doesn't work as expected |
| * :github:`29793` - Ninja generated error when setting PCAP option in west |
| * :github:`29791` - spi stm32 dma: spi |
| * :github:`29790` - The zephyr-app-commands macro does not honor :generator: option |
| * :github:`29782` - smp_svr: Flashing zephyr.signed.bin does not seem to work on nrf52840dk |
| * :github:`29780` - nRF SDK hci_usb sample disconnects after 40 seconds with extended connection via coded PHY |
| * :github:`29776` - Check vector number and pointer to ISR in "_isr_wrapper" routine for aarch64 |
| * :github:`29775` - TCP socket stream |
| * :github:`29773` - sam_e70_xplained: running samples/net/sockets/civetweb/ failed |
| * :github:`29772` - sam_e70_xplained:running testcase tests/subsys/logging/log_core failed |
| * :github:`29771` - samples: net: sockets: tcp: tcp2 server not accepting with ipv6 bsd sockets |
| * :github:`29769` - mimxrt1050_evk: build error at tests/subsys/usb/device/ |
| * :github:`29762` - nRF53 Network core cannot start LFClk when using empty_app_core |
| * :github:`29758` - edtlib not reporting proper matching_compat for led nodes (and other children nodes) |
| * :github:`29740` - OTA using Thread |
| * :github:`29737` - up_squared: tests/subsys/power/power_mgmt failed. |
| * :github:`29733` - SAM0 will wake up with interrupted execution after deep sleep |
| * :github:`29732` - issue with ST Nucleo H743ZI2 |
| * :github:`29730` - drivers/pcie: In Kernel Mode pcie_conf_read crashes when used with newlib |
| * :github:`29722` - West flash is not able to flash with openocd |
| * :github:`29721` - drivers/sensor/lsm6dsl: assertion/UB during interrupt handling |
| * :github:`29720` - samples/display/lvgl/sample.gui.lvgl fails to build on several boards |
| * :github:`29716` - Dependency between userspace and memory protection features |
| * :github:`29713` - nRF5340 - duplicate unit-address |
| * :github:`29711` - Add BSD socket option SO_RCVTIMEO |
| * :github:`29710` - drivers: usb_dc_mcux_ehci: driver broken, build error at all USB test and samples |
| * :github:`29707` - xtensa xt-xcc -Wno-unused-but-set-variable not work |
| * :github:`29706` - xtensa xt-xcc inline warning |
| * :github:`29705` - reel_board: tests/kernel/sched/schedule_api/ fails on multiple boards |
| * :github:`29704` - [Coverity CID :215255] Dereference before null check in tests/subsys/fs/fs_api/src/test_fs.c |
| * :github:`29703` - [Coverity CID :215261] Explicit null dereferenced in subsys/emul/emul_bmi160.c |
| * :github:`29702` - [Coverity CID :215232] Dereference after null check in subsys/emul/emul_bmi160.c |
| * :github:`29701` - [Coverity CID :215226] Logically dead code in soc/xtensa/intel_adsp/common/bootloader/boot_loader.c |
| * :github:`29700` - [Coverity CID :215253] Unintentional integer overflow in drivers/timer/stm32_lptim_timer.c |
| * :github:`29699` - [Coverity CID :215249] Unused value in drivers/modem/ublox-sara-r4.c |
| * :github:`29698` - [Coverity CID :215248] Dereference after null check in drivers/modem/hl7800.c |
| * :github:`29697` - [Coverity CID :215243] Unintentional integer overflow in drivers/timer/stm32_lptim_timer.c |
| * :github:`29696` - [Coverity CID :215241] Buffer not null terminated in drivers/modem/hl7800.c |
| * :github:`29695` - [Coverity CID :215235] Dereference after null check in drivers/modem/hl7800.c |
| * :github:`29694` - [Coverity CID :215233] Logically dead code in drivers/modem/hl7800.c |
| * :github:`29693` - [Coverity CID :215224] Parse warning in drivers/modem/hl7800.c |
| * :github:`29692` - [Coverity CID :215221] Unchecked return value in drivers/regulator/regulator_fixed.c |
| * :github:`29690` - NUCLEO-H745ZI-Q + OpenOCD - connect under reset |
| * :github:`29684` - Can not make multiple BLE IPSP connection to the same host |
| * :github:`29683` - BLE IPSP sample doesn't work on raspberry pi 4 with nrf52840_mdk board |
| * :github:`29681` - Add NUCLEO-H723ZG board support |
| * :github:`29677` - stm32h747i_disco add ethernet support |
| * :github:`29675` - Remove pinmux dependency on STM32 boards |
| * :github:`29667` - RTT Tracing is not working using NXP mimxrt1064_evk |
| * :github:`29657` - enc28j60 on nRF52840 stalls during enc28j60_init_buffers in zephyr 2.4.0 |
| * :github:`29654` - k_heap APIs have no tests |
| * :github:`29649` - net: context: add net_context api to check if a port is bound |
| * :github:`29639` - Bluetooth: host: Security procedure failure can terminate GATT client request |
| * :github:`29637` - 5g is microwave and 4LTE is radio or static? |
| * :github:`29636` - Bluetooth: Controller: Connection Parameter Update indication timeout |
| * :github:`29634` - Build error: (Bluetooth: Mesh: split prov.c into two separate modules #28457) |
| * :github:`29632` - GPIO interrupt support for IO expander |
| * :github:`29631` - kernel: provide aligned variant of k_heap_alloc |
| * :github:`29629` - Creating a k_thread as runtime instantiated kernel object using k_malloc causes general protection fault |
| * :github:`29616` - Lorawan subsystem stack: missing MLE_JOIN parameter set |
| * :github:`29611` - usb/class/dfu: void wait_for_usb_dfu() terminates before DFU operation is completed |
| * :github:`29608` - question: create runtime instantiated kernel objects in kernel mode |
| * :github:`29594` - x86_64: RBX being clobbered in the idle thread |
| * :github:`29590` - ARM: FPU: using Unshared FP Services mode can still result in corrupted floating point registers |
| * :github:`29589` - Creating a k_thread and k_sem as runtime instantiated kernel object causes general protection fault |
| * :github:`29574` - question: about CONFIG_NET_BUF_POOL_USAGE |
| * :github:`29567` - Using openthread based echo_client and lwm2m_client cannot ping the external network address |
| * :github:`29549` - doc: Zephyr module feature ``depends`` not documented. |
| * :github:`29544` - Bluetooth: Mesh: Friend node unable relay message for lpn |
| * :github:`29541` - CONFIG_THREAD_LOCAL_STORAGE=y build fails with ZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb |
| * :github:`29538` - eswifi recvfrom() not properly implemented on disco_l475_iot1 |
| * :github:`29534` - reel_board:running tests/kernel/workq/work_queue_api/ failed |
| * :github:`29533` - mec15xxevb_assy6853:running testcase tests/kernel/workq/work_queue_api/ failed. |
| * :github:`29532` - mec15xxevb_assy6853:running testcase tests/portability/cmsis_rtos_v2/ failed. |
| * :github:`29530` - display: nrf52840: adafruit_2_8_tft_touch_v2 shield not working with nrf-spim driver |
| * :github:`29519` - kernel: provide aligned variants for allocators |
| * :github:`29518` - sleep in qemu to short |
| * :github:`29499` - x86 thread stack guards persist after thread exit |
| * :github:`29497` - Warning in CR2 |
| * :github:`29491` - usb: web USB sample fails Chapter9 USB3CV tests. |
| * :github:`29478` - fs: fs_open can corrupt fs_open_t object given via zfp parameter |
| * :github:`29468` - usb: ZEPHYR FATAL ERROR when running USB test for Nordic. |
| * :github:`29467` - nrf_qspi_nor.c Incorrect value used for checking start of RAM address space |
| * :github:`29446` - pwm: stm32: output signal delayed |
| * :github:`29444` - Network deadlock |
| * :github:`29442` - build failure w/sanitycheck for samples/bluetooth/hci_usb_h4/sample.bluetooth.hci_usb_h4 |
| * :github:`29440` - Missing hw-flow-control; in hci_uart overlay files |
| * :github:`29435` - SDCard via SD/SDIO/MMC interfaces |
| * :github:`29430` - up_squared_adsp: Sanitycheck can not run test case on Up_Squared_ADSP board |
| * :github:`29429` - net: dns: enable dns service discovery for mdns service |
| * :github:`29418` - ieee802154: cc13xx_cc26xx: bug in rf driver library |
| * :github:`29412` - sanitycheck: skipped tests marked as failed due to the reason SKIPPED (SRAM overflow) |
| * :github:`29398` - ICMPv6 error sent with incorrect link layer addresses |
| * :github:`29386` - unexpected behavior when doing syscall with 7 or more arguments |
| * :github:`29382` - remove memory domain restriction on system RAM for memory partitions on MMU devices |
| * :github:`29376` - sanitycheck: "TypeError: 'NoneType' object is not iterable" |
| * :github:`29373` - Some altera DTS bindings have the wrong vendor prefix |
| * :github:`29368` - STM32: non F1 -pinctrl.dtsi generation files: Limit mode to variants |
| * :github:`29367` - usb: drivers: add USB support for UP squared |
| * :github:`29364` - cdc_acm_composite fails USB3CV test for Nordic platform. |
| * :github:`29363` - shell: inability to print 64-bit integers with newlib support |
| * :github:`29357` - RFC: API Change: Bluetooth: Update indication callback parameters |
| * :github:`29347` - Network deadlock because of mutex locking order |
| * :github:`29346` - west boards doesn't display the arcitecture. |
| * :github:`29330` - mec15xxevb_assy6853:running samples/boards/mec15xxevb_assy6853/power_management Sleep entry latency is higher than expected |
| * :github:`29329` - tests: kernel.workqueue.api tests fail on multiple platforms |
| * :github:`29328` - mec15xxevb_assy6853:running tests/kernel/workq/work_queue_api/ failed |
| * :github:`29327` - mec15xxevb_assy6853:region ``SRAM`` overflowed during build |
| * :github:`29319` - up_squared: tests/kernel/timer/timer_api failed. |
| * :github:`29317` - mimxrt1015: kernel_threads_sched: application meet size issue |
| * :github:`29315` - twr_kv58f220m: all application build failure |
| * :github:`29312` - [RFC] [BOSSA] Improve offset parameter |
| * :github:`29310` - ble central Repeat read and write to three peripherals error USAGE FAULT |
| * :github:`29309` - ADC1 doesn't read correctly on STM32F7 |
| * :github:`29308` - GPIO bit banging i2c init before gpio clock init in stm32f401 plantform,cause same gpio can't work. |
| * :github:`29307` - samples/bluetooth/mesh-demo unable to send vendor button message |
| * :github:`29300` - K_THREAD_DEFINE() uses const in a wrong way |
| * :github:`29298` - xlnx_psttc_timer driver has an imprecise z_clock_set_timeout() implementation |
| * :github:`29287` - spi: SPI_LOCK_ON does not hold the lock for multiple spi_transceive until spi_release |
| * :github:`29284` - compilation issues for MinnowBoard/ UpSquared on documentation examples |
| * :github:`29283` - quickfeather not listed in boards |
| * :github:`29274` - Can't get Coded PHY type(S2 or S8) |
| * :github:`29272` - nordic qspi: readoc / writeoc selection may not work |
| * :github:`29263` - tests/kernel/mem_protect/obj_validation fails build on some boards after recent changes |
| * :github:`29261` - boards: musca_b1: post build actions with TF-M might not be done in right order |
| * :github:`29259` - sanitycheck: sanitycheck defines test expected to fail as FAILED |
| * :github:`29258` - net: Unable to establish TCP connections from Windows hosts |
| * :github:`29257` - Race condition in k_queue_append and k_queue_alloc_append |
| * :github:`29248` - board: nrf52840_mdk: support for qspi flash missing |
| * :github:`29244` - k_thread_resume can cause k_sem_take with K_FOREVER to return -EAGAIN and crash |
| * :github:`29239` - i2c: mcux driver does not prevent simultaneous transactions |
| * :github:`29235` - Endless build loop after adding pinctrl dtsi |
| * :github:`29223` - BLE one central connect multiple peripherals |
| * :github:`29220` - ARC: tickless idle exit code destroy exception status |
| * :github:`29202` - core kernel depends on minimal libc ``z_prf()`` |
| * :github:`29195` - west fails with custom manifest |
| * :github:`29194` - Sanitycheck block after passing some test |
| * :github:`29183` - DHCPv4 retransmission interval gets too large |
| * :github:`29175` - x86 fails all tests if CONFIG_X86_KPTI is disabled |
| * :github:`29173` - uart_nrfx_uart fails uart_async_api_test |
| * :github:`29166` - sanitycheck ``--test-only --device-testing --hardware-map`` shouldn't run tests on all boards from ``--build-only`` |
| * :github:`29165` - shell_print doesn't support anymore %llx when used with newlib |
| * :github:`29164` - net: accept() doesn't return an immediately usable descriptor |
| * :github:`29162` - Data Access Violation when LOG_* is called on ISR context |
| * :github:`29155` - CAN BUS support on Atmel V71 |
| * :github:`29150` - CONFIG_BT_SETTINGS_CCC_LAZY_LOADING never loads CCC |
| * :github:`29148` - MPU: twr_ke18f: many kernel application fails when allocate dynamic MPU region |
| * :github:`29146` - canisotp: mimxrt1064_evk: no DT_CHOSEN_ZEPHYR_CAN_PRIMARY_LABEL defined cause tests failure |
| * :github:`29145` - net: frdmk64f many net related applications meet hardfault, hal driver assert |
| * :github:`29139` - tests/kernel/fatal/exception failed on nsim_sem_mpu_stack_guard board |
| * :github:`29120` - STM32: Few issues on on pinctrl generation script |
| * :github:`29113` - Build failure with OSPD |
| * :github:`29111` - Atmel SAM V71 UART_0 fail |
| * :github:`29109` - HAL STM32 Missing ETH pin control configurations in DT files |
| * :github:`29101` - Bluetooth: assertion fail with basic repeated extended advertisement API |
| * :github:`29099` - net: dns: dns-sd: support for dns service discovery |
| * :github:`29098` - ATT timeout worker not canceled by destroy, and may operate on disposed object |
| * :github:`29095` - zefi.py has incorrect assertions |
| * :github:`29092` - tests/drivers/uart/uart_async_api fails on nrf52840dk_nrf52840 (and additional platforms) |
| * :github:`29089` - doc: boards: cc1352r_sensortag: fix minor rst issue |
| * :github:`29083` - Bluetooth: Host: Inconsistent permission value during discovery procedure |
| * :github:`29078` - nRF52840 doesn't start legacy advertisment after extended advertisment |
| * :github:`29074` - #27901 breaks mikroe_* shields overlay |
| * :github:`29070` - NXP LPC GPIO driver masked set does not use the mask |
| * :github:`29068` - chosen zephyr,code-partition has no effect on ELF linking start address |
| * :github:`29066` - kernel: k_sleep doesn't handle relative or absolute timeouts >INT_MAX |
| * :github:`29062` - samples/bluetooth/peripheral_hr/sample.bluetooth.peripheral_hr_rv32m1_vega_ri5cy fails to build on rv32m1_vega_ri5cy |
| * :github:`29059` - HAL: mchp: Missing PCR ids to control PM for certain HW blocks |
| * :github:`29056` - tests/bluetooth/init/bluetooth.init.test_ctlr_dbg fails to build on nrf51dk_nrf51422 |
| * :github:`29050` - Ugrade lvgl library |
| * :github:`29048` - Removing pwr-gpio of rt1052 from devicetree will cause build error |
| * :github:`29047` - Boards: nucleo_stm32g474re does not build |
| * :github:`29043` - dirvers: eth_stm32_hal: No interrupt is generated on the MII interface. |
| * :github:`29042` - CONFIG_SHELL_HELP=n fails to compile |
| * :github:`29034` - error in samples/subsys/usb/cdc_acm |
| * :github:`29025` - [Coverity CID :214882] Argument cannot be negative in tests/posix/eventfd/src/main.c |
| * :github:`29024` - [Coverity CID :214878] Argument cannot be negative in tests/posix/eventfd/src/main.c |
| * :github:`29023` - [Coverity CID :214877] Argument cannot be negative in tests/posix/eventfd/src/main.c |
| * :github:`29022` - [Coverity CID :214876] Argument cannot be negative in tests/posix/eventfd/src/main.c |
| * :github:`29021` - [Coverity CID :214874] Argument cannot be negative in tests/posix/eventfd/src/main.c |
| * :github:`29020` - [Coverity CID :214873] Argument cannot be negative in tests/posix/eventfd/src/main.c |
| * :github:`29019` - [Coverity CID :214871] Side effect in assertion in tests/kernel/sched/preempt/src/main.c |
| * :github:`29018` - [Coverity CID :214881] Unchecked return value in subsys/mgmt/ec_host_cmd/ec_host_cmd_handler.c |
| * :github:`29017` - [Coverity CID :214879] Explicit null dereferenced in subsys/emul/spi/emul_bmi160.c |
| * :github:`29016` - [Coverity CID :214875] Dereference after null check in subsys/emul/spi/emul_bmi160.c |
| * :github:`29015` - [Coverity CID :214880] Out-of-bounds access in subsys/net/ip/tcp2.c |
| * :github:`29014` - [Coverity CID :214872] Bad bit shift operation in drivers/ethernet/eth_w5500.c |
| * :github:`29008` - BLE Connection fails to establish between two nRF52840-USB Dongles with Zephyr controller |
| * :github:`29007` - OOT manifest+module discovery/builds fail |
| * :github:`29003` - memory corruption in pkt_alloc |
| * :github:`28999` - STM32: Transition to device tree based pinctrl configuration |
| * :github:`28990` - Docs: Dead links to sample source directories |
| * :github:`28979` - Automatic reviewer assignment for PR does not seem to work anymore |
| * :github:`28976` - sanitycheck failing all tests for nsim_em7d_v22 |
| * :github:`28970` - clarify thread life-cycle documentation |
| * :github:`28956` - API-less devices aren't findable |
| * :github:`28955` - undesired kernel debug log |
| * :github:`28953` - winc1500 driver blocks on listen |
| * :github:`28948` - hci_usb: ACL transfer not restarted after USB Suspend - Resume |
| * :github:`28942` - ARC: nsim_hs_smp: huge zephyr.hex file generated on build |
| * :github:`28941` - Civetweb: create separate directory |
| * :github:`28938` - EFR32BGx Bluetooth Support |
| * :github:`28935` - support code coverage in unit tests |
| * :github:`28934` - pinmux: stm32: port remaining pinctrl DT serial definitions for STM32 based boards |
| * :github:`28933` - mcuboot: Brick when using BOOT_SWAP_USING_MOVE and reset happens during images swap |
| * :github:`28925` - west failed due to empty value in self.path |
| * :github:`28921` - MCUboot / smp_svr sample broken in 2.4.0 |
| * :github:`28916` - net_if_down doesn't clear address |
| * :github:`28912` - Incorrect macro being used to init a sflist |
| * :github:`28908` - The same buffers are shared by the 2 Ethernet controllers in the eth_mcux driver |
| * :github:`28898` - lwm2m_client can't start if mcuboot is enabled |
| * :github:`28897` - SPI does not work for STM32 min dev board |
| * :github:`28893` - Double-dot in path's may cause problems with gcc under Windows |
| * :github:`28887` - Bluetooth encryption request overrides ongoing phy update |
| * :github:`28881` - tests/kernel/mem_protect/sys_sem: qemu_x86_64 intermittent failure |
| * :github:`28876` - -p doesn't run a pristine build |
| * :github:`28872` - Support ESP32 as Bluetooth controller |
| * :github:`28870` - Peripheral initiated connection parameter update is ignored |
| * :github:`28867` - ARM Cortex-M4: Semaphores could not be used in ISRs with priority 0? |
| * :github:`28865` - Doc: Generate documentation using dts bindings |
| * :github:`28854` - ``CONFIG_STACK_POINTER_RANDOM`` may be undefined |
| * :github:`28847` - code_relocation sample does not work on windows |
| * :github:`28844` - Double quote prepended when exporting CMAKE compile option using zephyr_get_compile_options_for_lang() |
| * :github:`28833` - STM32: SPI DMA Driver - HW CS handling not compatible with spi_nor (Winbond W25Q) |
| * :github:`28826` - nRF QSPI flash driver broken for GD25Q16 |
| * :github:`28822` - Improve STM32 LL HAL usage |
| * :github:`28809` - Enable bt_gatt_notify() to overwrite notified value before sending rather than queue values |
| * :github:`28794` - RFC: API Change: k_work |
| * :github:`28791` - STM32: Clock recovery system (CRS) support |
| * :github:`28787` - lwm2m-client sample can't be build with openthread and DTLS |
| * :github:`28785` - shell: It should be possible to get list of commands without pressing tab |
| * :github:`28777` - Memory pool issue |
| * :github:`28775` - Update to TFM v1.2 release |
| * :github:`28774` - build failure: several bluetooth samples fail to build on nrf51dk_nrf51422 |
| * :github:`28773` - Lower Link Layer code use upper link layer function have " undefined reference to" |
| * :github:`28758` - ASSERTION FAIL [conn->in_retransmission == 1] with civetweb sample application |
| * :github:`28745` - Bug in drivers/modem/hl7800.c |
| * :github:`28739` - Bluetooth: Mesh: onoff_level_lighting_vnd sample fails provisioning |
| * :github:`28735` - NULL pointer access in zsock_getsockname_ctx with TCP2 |
| * :github:`28723` - Does not respect python virtualenv |
| * :github:`28722` - Bluetooth: provide ``struct bt_conn`` to ccc_changed callback |
| * :github:`28714` - Bluetooth: PTS upper tester: GAP/CONN/NCON/BV-02-C Fails because of usage of NRPA |
| * :github:`28709` - phandle-array doesn't allow array of just phandles |
| * :github:`28706` - west build -p auto -b nrf52840dk_nrf52840 error: HAS_SEGGER_RTT |
| * :github:`28701` - ASSERTION FAIL [!radio_is_ready()] |
| * :github:`28699` - Bluetooth: controller: Speed up disconnect process when slave latency is used |
| * :github:`28694` - k_wakeup follwed by k_thread_resume call causes system freeze |
| * :github:`28693` - FCB support for non-0xFF flash erase values |
| * :github:`28691` - tests: arch: arm: arm_thread_swap: fails with bus fault |
| * :github:`28688` - Bluetooth: provide ``struct bt_gatt_indicate_params`` to ``bt_gatt_indicate_func_t`` |
| * :github:`28670` - drivers: flash: bluetooth: stm32wb: attempt to erase internal flash before enabling Bluetooth cause fatal error |
| * :github:`28664` - Decide whether to enable HW_STACK_PROTECTION by default |
| * :github:`28650` - GCC-10.2 link issue w/g++ on aarch64 |
| * :github:`28629` - tests: kernel: common: and common.misra are failing on nrf52840dk |
| * :github:`28620` - 6LowPAN ipsp: ping host -> µc failes, ping µc -> host works. after that: ping host -> µc works |
| * :github:`28613` - cannot set GDB watchpoints on QEMU x86 with icount enabled |
| * :github:`28590` - up_squared_adsp:running tests/kernel/smp/ failed |
| * :github:`28589` - up_squared_adsp:running tests/kernel/workq/work_queue/ failed |
| * :github:`28587` - Data corruption while serving large files via HTTP with TCP2 |
| * :github:`28556` - mec15xxevb_assy6853:running tests/kernel/sched/schedule_api/ failed |
| * :github:`28547` - up_squared: tests/subsys/debug/coredump failed using twister command. |
| * :github:`28544` - Null pointer dereference in ll_adv_aux_ad_data_set |
| * :github:`28533` - soc: ti_simplelink: cc13xx-cc26xx: kconfig for subghz 802.15.4 |
| * :github:`28509` - series-push-hook.sh: Don't parse then-master-to-latest-master commits after rebase to lastest |
| * :github:`28504` - dfu: dfu libraries might fails to compile on redefined functions while building MCUBoot |
| * :github:`28502` - USB DFU class: support MCUBoot CONFIG_SINGLE_APPLICATION_SLOT |
| * :github:`28493` - Sanitycheck on ARC em_starterkit_em7d has many tests timeout |
| * :github:`28483` - Fix nanosleep(2) for sub-microsecond durations |
| * :github:`28473` - Mcuboot fails to compile when using single image and usb dfu |
| * :github:`28469` - Unable to capture adc signal at 8ksps when using nrf52840dk board. |
| * :github:`28462` - SHIELD not handled correct in CMake when using custom board |
| * :github:`28461` - ``HCI_CMD_TIMEOUT`` when setting ext adv data in the hci_usb project |
| * :github:`28456` - TOOLCHAIN_LD_FLAGS setting of -mabi/-march aren't propagated to linker invocation on RISC-V |
| * :github:`28442` - How handle IRQ_CONNECT const requirement? |
| * :github:`28406` - Condition variables |
| * :github:`28383` - bq274xx sample is not working |
| * :github:`28363` - ssd16xx: off-by-one with non-multiple-of-eight heights |
| * :github:`28355` - Document limitations of net_buf queuing functions |
| * :github:`28309` - Sample/subsys/fs/littlefs with board=nucleo_f429zi don't work |
| * :github:`28299` - net: lwm2m: Improve token handling |
| * :github:`28298` - Deep sleep(system off) is not working with LVGL and display driver |
| * :github:`28296` - test_essential_thread_abort: lpcxpresso55s16_ns test failure |
| * :github:`28278` - PWM silently fails when changing output frequency on stm32 |
| * :github:`28220` - flash: revise API to remove block restrictions on write operations |
| * :github:`28177` - gPTP gptp_priority_vector struct field ordering is wrong |
| * :github:`28176` - [Coverity CID :214217] Out-of-bounds access in tests/kernel/mem_protect/mem_map/src/main.c |
| * :github:`28175` - [Coverity CID :214214] Uninitialized pointer read in tests/benchmarks/data_structure_perf/rbtree_perf/src/rbtree_perf.c |
| * :github:`28170` - [Coverity CID :214222] Unrecoverable parse warning in include/ec_host_cmd.h |
| * :github:`28168` - [Coverity CID :214218] Unused value in subsys/mgmt/osdp/src/osdp.c |
| * :github:`28159` - [Coverity CID :214216] Logically dead code in drivers/pwm/pwm_stm32.c |
| * :github:`28155` - sam_e70_xplained:running samples/net/sockets/civetweb/ failed |
| * :github:`28124` - Linking external lib against POSIX API |
| * :github:`28117` - CoAP/LWM2M: Clean Packet Retransmission Concept |
| * :github:`28113` - Embed precise Zephyr version & platform name in sanitycheck output .xml |
| * :github:`28094` - samples: drivers: spi_flash_at45: Not work for boards without internal flash driver |
| * :github:`28092` - Make SPI speed of SDHC card configurable |
| * :github:`28014` - tests: kernel: mem_protect: sys_sem: failed when CONFIG_FPU is activated |
| * :github:`27999` - Add QSPI tests for microchip mec1521 board, drivers are in zephyr/drivers/spi, to be tested on mec15xxevb_assy6853 |
| * :github:`27997` - Errors in copy paste lengthy script into Shell Console |
| * :github:`27981` - Low UART utilization for hci_uart |
| * :github:`27957` - flash signed binaries: key path and version |
| * :github:`27914` - frdm_k64f async uart api |
| * :github:`27892` - [v2.1.x] lib: updatehub: Improve download on slow networks and security fix |
| * :github:`27890` - [v2.2.x] lib: updatehub: Improve download on slow networks and security fix |
| * :github:`27881` - Zephyr requirements.txt fails to install on Python 3.9rc1 |
| * :github:`27879` - Make i2c_slave callbacks public in the documentation |
| * :github:`27856` - Support per thread runtime statistics |
| * :github:`27846` - Weird ADC outliers on nrf52 |
| * :github:`27841` - samples: disk: unable to access sd card |
| * :github:`27829` - sys_mutex and futex missing documentation |
| * :github:`27809` - Cannot enable MPU for nucleo_l552ze_q_ns |
| * :github:`27785` - memory domain arch implementation not correct with respect to SMP on ARC |
| * :github:`27716` - Bluetooth: Mesh: Devices relay their own messages (even with relay disabled!) |
| * :github:`27677` - RFC: Get rid of shell UART device selection in Kconfig |
| * :github:`27672` - [v2.2] BLE Transaction Collision |
| * :github:`27633` - arm64 SMP |
| * :github:`27628` - stm32: i2c bus failure when using USB |
| * :github:`27622` - Power management for modems using PPP |
| * :github:`27600` - JSON Api refuse to decode null value |
| * :github:`27596` - logging: backend inconsistency with console and shell |
| * :github:`27583` - sanitycheck does not fail on SRAM overflow, add option to make it fail on those cases. |
| * :github:`27574` - mec15xxevb_assy6853:arch.arm.arch.arm.no.multithreading failed to run |
| * :github:`27573` - coverage: When enable coverage, some testcases need more time |
| * :github:`27570` - up_squared:logging.add.logging.add.async failed |
| * :github:`27561` - drivers: gpio: pca9555 : Add GPIO driver enable interrupt support |
| * :github:`27559` - How to use stm32cubeIDE to build and debug? |
| * :github:`27525` - Including STM32Cube's USB PD support to Zephyr |
| * :github:`27510` - [v1.14] Bluetooth: controller: Fix uninit conn context after invalid channel map |
| * :github:`27506` - driver: peci: mchp: Ping command is failing due to improper tx wait timeout. |
| * :github:`27490` - arch/common/isr_tables.c compilation fails with CONFIG_NUM_IRQS=0 |
| * :github:`27487` - storage/stream: should use only flash driver public API |
| * :github:`27468` - BT Host: Periodic Advertisement delayed receive |
| * :github:`27467` - BT Host: Periodic Advertiser List |
| * :github:`27466` - BT Host: Periodic Advertisement Sync Transfer (PAST) |
| * :github:`27457` - Add support for Nordic nrfx PDM driver for Nordic Thingy52 |
| * :github:`27423` - RFC: API change: clock_control: Change parameters of clock_control_async_on |
| * :github:`27417` - CivetWeb Enable WebSocket |
| * :github:`27396` - samples/subsys/logging/logger timeout when sanitycheck enable coverage, it needs a filter |
| * :github:`27369` - spi: stm32: dma: rx transfer error when spi_write called |
| * :github:`27367` - Sprintf - error while sending data to SD card |
| * :github:`27350` - ADC: adc shell failure when mismatch with dts device label |
| * :github:`27332` - [v2.3.x] lib: updatehub: Improve download on slow networks and security fix |
| * :github:`27299` - espi: xec: Whenever eSPI host indicates we are entering DnX mode, notification doesn't reach application |
| * :github:`27279` - CMSIS RTOS v1 Signals Implementation Issue |
| * :github:`27231` - Sending data to .csv file on SD card - ERROR CS control inhibited (no GPIO device) |
| * :github:`27195` - Sanitycheck: BinaryHandler can't kill children processes |
| * :github:`27176` - [v1.14] Restore socket descriptor permission management |
| * :github:`27174` - TCP Server don't get the right data from the client |
| * :github:`27146` - [Coverity CID :211510] Unchecked return value in lib/posix/semaphore.c |
| * :github:`27122` - Implement watchdog driver for mimxrt1050_evk |
| * :github:`27068` - ESP-IDF Bootloader bootloop |
| * :github:`27055` - BlueZ with ESP32 boards supported or not? |
| * :github:`27047` - zefi.py assumes host GCC is x86 |
| * :github:`27031` - Zephyr OpenThread Simulation |
| * :github:`27020` - civetweb issues |
| * :github:`27006` - unsynchronized newlib uintptr_t and PRIxPTR definition on xtensa |
| * :github:`26987` - [Coverity CID :211475] Unintended sign extension in drivers/sensor/wsen_itds/itds.c |
| * :github:`26975` - Control never returns from stm32_i2c_msg_write(), when SCL is pulled low permanently (hardware fault occurs) |
| * :github:`26961` - occasional sanitycheck failures in samples/subsys/settings |
| * :github:`26949` - sanitycheck gets overwhelmed by console output |
| * :github:`26912` - arm: cortex_r: config_userspace: hang during early power-up |
| * :github:`26873` - WIFI_ESP: sockets left opened after unexpected reset of ESP |
| * :github:`26829` - GSM modem example on stm32f103 bluepill |
| * :github:`26819` - drivers: modem: SARA modem driver leaks sockets |
| * :github:`26807` - Bluetooth HCI USB sample is not working |
| * :github:`26799` - Introduce p99 |
| * :github:`26794` - arc: smp: different sanitycheck results of ARC hsdk's 2 cores and 4 cores configuration |
| * :github:`26732` - Advertise only on single bluetooth channel |
| * :github:`26722` - uarte_nrfx_poll_out() in NRF UARTE driver does not work with hardware flow control |
| * :github:`26665` - Implement reset for ARC development boards |
| * :github:`26656` - SAM0 USB transfer slot leak |
| * :github:`26637` - How to identify sensor device? |
| * :github:`26584` - Multicast emission is only possible for ipv4 starting with 224. |
| * :github:`26533` - Support newlib for Aarch64 architecture |
| * :github:`26522` - Reported "Supported shields" list includes boards |
| * :github:`26515` - timers: platforms using cortex_m_systick does not enter indefinite wait on SLOPPY_IDLE |
| * :github:`26500` - sanitycheck reports failing tests with test_slice_scheduling() |
| * :github:`26488` - Bluetooth: Connection failure using frdm_kw41z shield |
| * :github:`26486` - possible SMP race with k_thread_join() |
| * :github:`26477` - GPIO sim driver |
| * :github:`26443` - sanitycheck shall generate results and detailed information about tests and environment in json format. |
| * :github:`26409` - Clearing of previously initialized data during IPv6 interface init causes infinite loop, memory corruption in timer ISR |
| * :github:`26383` - OpenThread NCP radio-only |
| * :github:`26372` - qspi driver does not work if multithreading is disabled |
| * :github:`26330` - tcp: low bulk receive performance due to window handling |
| * :github:`26315` - ieee802154: cc13xx_cc26xx: sub_ghz support |
| * :github:`26312` - drivers: ieee802154: cc13xx_cc26xx: adopt hal/ti rf driverlib |
| * :github:`26275` - USB MSC fails 'Command Set Test' from USB3CV. |
| * :github:`26272` - Cannot use alternative simulation runner with sanitycheck |
| * :github:`26227` - icount support for qemu_arc_{em,hs} |
| * :github:`26225` - x86_64 doesn't seem to be handling spurious interrupts properly |
| * :github:`26219` - sys/util: add support for mapping lists with per-element terminal symbols |
| * :github:`26172` - Zephyr Master/Slave not conforming with Core Spec. 5.2 connection policies |
| * :github:`26163` - qemu_arc_{em,hs} keeps failing in CI on tests/kernel/lifo/lifo_usage |
| * :github:`26142` - cmake warning: "Policy CMP0077 is not set" |
| * :github:`26084` - 2.4 Release Checklist |
| * :github:`26072` - refactor struct device to reduce RAM demands |
| * :github:`26051` - shell: uart: Allow a change in the shell initalisation to let routing it through USB UART |
| * :github:`26050` - devicetree: provide access to node ordinal |
| * :github:`26026` - RFC: drivers: pwm: add functions for capturing pwm pulse width and period |
| * :github:`25956` - Including header files from modules into app |
| * :github:`25927` - ARM: Core Stack Improvements/Bug fixes for 2.4 release |
| * :github:`25918` - qemu_nios2 crash when enabled icount |
| * :github:`25832` - [test][kernel][lpcxpresso55s69_ns] kernel cases meet ESF could not be retrieved successfully |
| * :github:`25604` - USB: enable/disable a class driver at runtime |
| * :github:`25600` - wifi_eswifi: Unable to start TCP/UDP client |
| * :github:`25592` - Remove checks on board undocumented DT strings |
| * :github:`25597` - west sign fails to find header size or padding |
| * :github:`25508` - tests: add additonal power management tests |
| * :github:`25507` - up_squared:tests/portability/cmsis_rtos_v2 failed. |
| * :github:`25482` - outdated recommendations for SYS_CLOCK_TICKS_PER_SEC |
| * :github:`25466` - log build errors are not helpful |
| * :github:`25434` - nRF5340 Bluetooth peripheral_hr sample high power consumption |
| * :github:`25413` - soc: ti_simplelink: kconfig: ble: placeholder for hal_ti |
| * :github:`25409` - Inconsistent naming of Kconfig options related to stack sizes of various Zephyr components |
| * :github:`25395` - Websocket Server API |
| * :github:`25379` - Bluetooth mesh example not working |
| * :github:`25314` - Bluetooth: controller: legacy: Backport conformance test related changes |
| * :github:`25302` - lwm2m client sample bootstrap server support |
| * :github:`25182` - Raspberry Pi 4B Support |
| * :github:`25173` - k_sem_give(struct k_sem \*sem) should report failure when the semaphore is full |
| * :github:`25164` - Remove ``default:`` functionality from devicetree bindings |
| * :github:`25015` - Bluetooth Isochronous Channels Support |
| * :github:`25010` - disco_l475_iot1 don't confirm MCUBoot slot-1 image |
| * :github:`24803` - ADC driver test hangs on atsame54_xpro |
| * :github:`24652` - sanitycheck doesn't keep my cores busy |
| * :github:`24453` - docs: Allow to use the exact current zephyr version number in place of /latest/ in documentation URLs |
| * :github:`24358` - deprecate and remove old k_mem_pool / sys_mem_pool APIs |
| * :github:`24338` - UICR & FICR missing from nRF52* devicetree files |
| * :github:`24211` - [v2.2.x] lib: updatehub: Not working on Zephyr 2.x |
| * :github:`23917` - Kconfig: problems with using backslash-escapes in "default" value of "string" option |
| * :github:`23874` - Test case to check registers data |
| * :github:`23866` - sample hci_usb fails with zephyr 2.2.0 (worked with zephyr 2.1.0) |
| * :github:`23729` - hifive1_revb fails to work with samples/subsys/console/getline |
| * :github:`23314` - Bluetooth: controller: Use defines for 625 us and 1250 us |
| * :github:`23302` - Poor TCP performance |
| * :github:`23212` - ARC: SMP: Enable use of ARConnect Inter-core Debug Unit |
| * :github:`23210` - mimxrt1050_evk:tests/net/iface failed with v1.14 branch. |
| * :github:`23063` - CMSIS v2 osThreadJoin does not work if thread exits with osThreadExit |
| * :github:`23062` - thread_num / thread_num_dynamic are never decremented in CMSIS v2 thread.c |
| * :github:`22942` - Missing TX power options for nRF52833 |
| * :github:`22771` - z_x86_check_stack_bounds() doesn't work right for nested IRQs on x86-64 |
| * :github:`22703` - Implement ADC driver for lpcxpresso55s69 |
| * :github:`22411` - AArch64 / Cortex-A port improvements / TODO |
| * :github:`22333` - drivers: can: Check bus-timing values at compile-time |
| * :github:`22247` - Discussion: Supporting the Arduino ecosystem |
| * :github:`22198` - BMA280 Sample Code |
| * :github:`22185` - Add Thread Local Storage (TLS) support |
| * :github:`22060` - Build fails with gcc-arm-none-eabi-9-2019-q4-major |
| * :github:`21991` - memory domain locking may not be entirely correct |
| * :github:`21495` - x86_64: interrupt stack overflows are not caught |
| * :github:`21462` - x86_64 exceptions are not safely preemptible, and stack overflows are not caught |
| * :github:`21273` - devicetree: improved support for enum values |
| * :github:`21238` - Improve Zephyr HCI VS extension detection |
| * :github:`21216` - Ztest "1cpu" cases don't retarget interrupts on x86_64 |
| * :github:`21179` - Reduce RAM consumption for civetweb HTTP sample |
| * :github:`20980` - ESP32 flash error with segment count error using esptool.py from esp-idf |
| * :github:`20925` - tests/kernel/fp_sharing/float_disable crashes on qemu_x86 with CONFIG_KPTI=n |
| * :github:`20821` - Do USE\_\(DT\_\)CODE\_PARTITION and FLASH_LOAD_OFFSET/SIZE need to be user-configurable? |
| * :github:`20792` - sys_pm: fragility in residency policy |
| * :github:`20775` - sys_pm_ctrl: fragility in managing state control |
| * :github:`20686` - tests/kernel/fp_sharing/float_disable failed when code coverage is enabled on qemu_x86. |
| * :github:`20518` - [Coverity CID :205647]Memory - illegal accesses in /tests/arch/x86/info/src/memmap.c |
| * :github:`20337` - sifive_gpio: gpio_basic_api test fails |
| * :github:`20262` - dt-binding for timers |
| * :github:`20118` - Zephyr BLE stack to work on the CC2650 Launchpad |
| * :github:`19850` - Bluetooth: Mesh: Modular settings handling |
| * :github:`19530` - Enhance sanitycheck/CI for separating build phase from testing |
| * :github:`19523` - Can't build fade-led example for any Nordic board |
| * :github:`19511` - net: TCP: echo server blocks after a packet with zero TCP options |
| * :github:`19497` - log subsystem APIs need to be clearly namespaced as public or private |
| * :github:`19467` - Error building samples with PWM |
| * :github:`19448` - devicetree: support disabled devices |
| * :github:`19435` - how to change uart tx rx pins in zephyr |
| * :github:`19380` - Potential bugs re. 'static inline' and static variables |
| * :github:`19244` - BLE throughput of DFU by Mcumgr is too slow |
| * :github:`19138` - zassert prints to UART even when RTT is selected |
| * :github:`19100` - LwM2M sample with DTLS: does not connect |
| * :github:`19003` - bluetooth : Mesh: adv thread can be replace by other methods. |
| * :github:`18927` - settings: deprecate base64 encoding |
| * :github:`18778` - soc: arm: nordic_nrf: Defining DT\_..._DEV_NAME |
| * :github:`18728` - sam_e70_xplained:tests/subsys/logging/log_core failed. |
| * :github:`18608` - PCA9685 PWM driver is broken |
| * :github:`18607` - DesignWare PWM driver is broken |
| * :github:`18601` - LwM2M client sample: an overlay for OpenThread support |
| * :github:`18551` - address-of-temporary idiom not allowed in C++ |
| * :github:`18529` - fs/fcb: consider backport of mynewt fixes |
| * :github:`18276` - irq_connect_dynamic() is not tested on all arches |
| * :github:`17893` - dynamic threads don't work on x86 in some configurations |
| * :github:`17787` - openocd unable to flash hello_world to cc26x2r1_launchxl |
| * :github:`17743` - cross compiling for RISCV32 fails as compiler flags are not supplied by board but must be in target.cmake |
| * :github:`17645` - VSCode debugging Zephyr application |
| * :github:`17545` - Licensing and reference to public domain material |
| * :github:`17300` - [Zephyr v1.14.0] mcumgr: stm32: Strange Build warnings when counter is enabled |
| * :github:`17023` - userspace: thread indexes are not released when dynamic threads lose all references |
| * :github:`17014` - reentrancy protection in counter drivers? |
| * :github:`16766` - net: net_pkt_copy don't work as expected when data was pulled from destination |
| * :github:`16544` - drivers: spi: spi_mcux_lpspi: inconsistent chip select behaviour |
| * :github:`16438` - fs/FCB fs/NVS : requires unaligned flash read-out length capabilities, |
| * :github:`16237` - disco_l475_iot1: samples/bluetooth/ipsp ko since 3151d26 |
| * :github:`16195` - k_uptime_delta(): Defective by design |
| * :github:`15944` - stm32: New Driver for FMC/FSMC |
| * :github:`15713` - MCUMGR_LOG build error |
| * :github:`15570` - Unbonded peripheral gets 'Tx Buffer Overflow' when erasing bond on master |
| * :github:`15372` - logging can't dump exceptions without losing data with CONFIG_LOG_PRINTK |
| * :github:`14591` - Infineon Tricore architecture support |
| * :github:`14571` - TCP: sending lots of data deadlocks with slow peer |
| * :github:`14300` - Bluetooth connection using central and peripheral samples in nrf52840 |
| * :github:`13955` - stm32: Implement async uart api |
| * :github:`13591` - tests/blutooth/tester: ASSERTION FAIL due to Recursive spinlock when running bt tester on qemu-cortex-m3 |
| * :github:`13396` - Cannot connect to Galaxy S8 via BLE |
| * :github:`13244` - How to encrypt advertise packet with zephyr and nrf52832 ？ |
| * :github:`12368` - File descriptors: Compile fails with non-POSIX out-of-tree libc |
| * :github:`12353` - intel_s1000: SPI Flash Erase command doesn't work when booting from flash |
| * :github:`12239` - BLE400 / nRF51822 (nRF51) PWM clock too low (servo-motor example) |
| * :github:`12150` - Power management on nRF52 boards |
| * :github:`11912` - net: SimpleLink: Create real cross-platform port |
| * :github:`11770` - Multiprotocol feature for BLE/Thread |
| * :github:`10904` - Requirements for driver devices generation using device tree |
| * :github:`10857` - Migrating from CMSIS-Core to DeviceTree results in loss of type information |
| * :github:`10460` - Bluetooth: settings: No space to store CCC config after successful pairing |
| * :github:`10158` - Have support for probot with Zephyr |
| * :github:`10022` - Porting Modbus Library: Need some guidance |
| * :github:`9944` - sockets: Connect doesn't send new SYN in case the first connection attempt fails |
| * :github:`9883` - DTS processing generates unit_address_vs_reg warning on entries with 'reg' |
| * :github:`9875` - Bluetooth: Host LE Extended Advertising |
| * :github:`9783` - LwM2M: Cannot create object instance without specifying instance number |
| * :github:`9509` - Unable to upload firmware over serial with mcumgr |
| * :github:`9406` - Generate DTS 'compatible' based compilation flags |
| * :github:`9403` - is Support C++ standard library? |
| * :github:`9087` - driver: CAN interface should be compatible with CAN-FD interface |
| * :github:`8499` - Device Tree support overhaul |
| * :github:`8393` - ``CONFIG_MULTITHREADING=n`` builds call ``main()`` with interrupts locked |
| * :github:`8008` - net: Sockets (and likely net_context's) should not be closed behind application's back |
| * :github:`7939` - Connections to TI CC254x break after conn_update |
| * :github:`7404` - arch: arm: MSP initialization during early boot |
| * :github:`7331` - Precise time sync through BLE mesh. |
| * :github:`6857` - need to improve filtering and coverage in sanitycheck |
| * :github:`6818` - Question: Is Lightweight OpenMP implementation supported in Zephyr? Or any plan? |
| * :github:`6648` - Trusted Execution Framework: practical use-cases (high-level overview) |
| * :github:`6199` - STM32: document dts porting rules |
| * :github:`6040` - Implement flash driver for LPC54114 |
| * :github:`5626` - Building samples failed |
| * :github:`4420` - net: tcp: RST handling is weak |
| * :github:`3675` - LE Adv. Ext.: Extended Scan with PHY selection for non-conn non-scan un-directed without aux packets |
| * :github:`3674` - LE Adv. Ext.: Non-Connectable and Non-Scannable Undirected without auxiliary packet |
| * :github:`3893` - Enhance k_stack_push() to check k_stack->top to avoid corruption |
| * :github:`3719` - Multiple consoles support. |
| * :github:`3441` - IP stack: No TCP send window handling |
| * :github:`3102` - Make newlib libc the default c library |
| * :github:`2247` - LE Controller: Change hal/ into a set of drivers |
