| # Copyright (c) 2021 Telink Semiconductor |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| # Telink B91 RF configuration options |
| |
| menuconfig IEEE802154_TELINK_B91 |
| bool "Telink B91 RF driver" |
| default y |
| depends on DT_HAS_TELINK_B91_ZB_ENABLED |
| |
| if IEEE802154_TELINK_B91 |
| |
| config IEEE802154_B91_INIT_PRIO |
| int "Telink B91 IEEE 802.15.4 initialization priority" |
| default 80 |
| help |
| Set the initialization priority number. Do not mess with it unless |
| you know what you are doing. |
| |
| config IEEE802154_B91_SET_TXRX_DELAY_US |
| int "Tx/Rx modes switching delay time (us)" |
| default 120 |
| help |
| Delay time needed for PLL stabilization during Tx/Rx modes switching. |
| |
| config IEEE802154_B91_CCA_RSSI_THRESHOLD |
| int "CCA procedure RSSI threshold" |
| default -50 |
| help |
| CCA procedure returns true if the current RSSI value is less than |
| this parameter. |
| |
| config IEEE802154_B91_RANDOM_MAC |
| bool "Random MAC address" |
| default y |
| help |
| Generate a random MAC address dynamically. |
| |
| if ! IEEE802154_B91_RANDOM_MAC |
| |
| config IEEE802154_B91_MAC4 |
| hex "MAC Address Byte 4" |
| default 0 |
| range 0 0xff |
| help |
| This is the byte 4 of the MAC address. |
| |
| config IEEE802154_B91_MAC5 |
| hex "MAC Address Byte 5" |
| default 0 |
| range 0 0xff |
| help |
| This is the byte 5 of the MAC address. |
| |
| config IEEE802154_B91_MAC6 |
| hex "MAC Address Byte 6" |
| default 0 |
| range 0 0xff |
| help |
| This is the byte 6 of the MAC address. |
| |
| config IEEE802154_B91_MAC7 |
| hex "MAC Address Byte 7" |
| default 0 |
| range 0 0xff |
| help |
| This is the byte 7 of the MAC address. |
| |
| endif # ! IEEE802154_B91_RANDOM_MAC |
| endif # IEEE802154_TELINK_B91 |
