blob: f2a63ec5311dc4cd7408072e14d5f31de4cca347 [file] [log] [blame]
/*
* Copyright (c) 2019 omSquare s.r.o.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <zephyr/drivers/uart.h>
#include <SEGGER_RTT.h>
#define DT_DRV_COMPAT segger_rtt_uart
extern struct k_mutex rtt_term_mutex;
struct uart_rtt_config {
void *up_buffer;
size_t up_size;
void *down_buffer;
size_t down_size;
uint8_t channel;
};
struct uart_rtt_data {
#ifdef CONFIG_UART_ASYNC_API
uart_callback_t callback;
void *user_data;
#endif /* CONFIG_UART_ASYNC_API */
};
static int uart_rtt_init(const struct device *dev)
{
/*
* Channel 0 is initialized at compile-time, Kconfig ensures that
* it is configured in correct, non-blocking mode. Other channels
* need to be configured at run-time.
*/
if (dev->config) {
const struct uart_rtt_config *cfg = dev->config;
SEGGER_RTT_ConfigUpBuffer(cfg->channel, dev->name,
cfg->up_buffer, cfg->up_size,
SEGGER_RTT_MODE_NO_BLOCK_SKIP);
SEGGER_RTT_ConfigDownBuffer(cfg->channel, dev->name,
cfg->down_buffer, cfg->down_size,
SEGGER_RTT_MODE_NO_BLOCK_SKIP);
}
return 0;
}
/**
* @brief Poll the device for input.
*
* @param dev UART device struct
* @param c Pointer to character
*
* @return 0 if a character arrived, -1 if the input buffer if empty.
*/
static int uart_rtt_poll_in(const struct device *dev, unsigned char *c)
{
const struct uart_rtt_config *config = dev->config;
unsigned int ch = config ? config->channel : 0;
unsigned int ret = SEGGER_RTT_Read(ch, c, 1);
return ret ? 0 : -1;
}
/**
* @brief Output a character in polled mode.
*
* @param dev UART device struct
* @param c Character to send
*/
static void uart_rtt_poll_out(const struct device *dev, unsigned char c)
{
const struct uart_rtt_config *config = dev->config;
unsigned int ch = config ? config->channel : 0;
SEGGER_RTT_Write(ch, &c, 1);
}
#ifdef CONFIG_UART_ASYNC_API
static int uart_rtt_callback_set(const struct device *dev,
uart_callback_t callback, void *user_data)
{
struct uart_rtt_data *data = dev->data;
data->callback = callback;
data->user_data = user_data;
return 0;
}
static int uart_rtt_tx(const struct device *dev,
const uint8_t *buf, size_t len, int32_t timeout)
{
const struct uart_rtt_config *cfg = dev->config;
struct uart_rtt_data *data = dev->data;
unsigned int ch = cfg ? cfg->channel : 0;
ARG_UNUSED(timeout);
/* RTT mutex cannot be claimed in ISRs */
if (k_is_in_isr()) {
return -ENOTSUP;
}
/* Claim the RTT lock */
if (k_mutex_lock(&rtt_term_mutex, K_NO_WAIT) != 0) {
return -EBUSY;
}
/* Output the buffer */
SEGGER_RTT_WriteNoLock(ch, buf, len);
/* Return RTT lock */
SEGGER_RTT_UNLOCK();
/* Send the TX complete callback */
if (data->callback) {
struct uart_event evt = {
.type = UART_TX_DONE,
.data.tx.buf = buf,
.data.tx.len = len
};
data->callback(dev, &evt, data->user_data);
}
return 0;
}
static int uart_rtt_tx_abort(const struct device *dev)
{
/* RTT TX is a memcpy, there is never a transmission to abort */
ARG_UNUSED(dev);
return -EFAULT;
}
static int uart_rtt_rx_enable(const struct device *dev,
uint8_t *buf, size_t len, int32_t timeout)
{
/* SEGGER RTT reception is implemented as a direct memory write to RAM
* by a connected debugger. As such there is no hardware interrupt
* or other mechanism to know when the debugger has added data to be
* read. Asynchronous RX does not make sense in such a context, and is
* therefore not supported.
*/
ARG_UNUSED(dev);
ARG_UNUSED(buf);
ARG_UNUSED(len);
ARG_UNUSED(timeout);
return -ENOTSUP;
}
static int uart_rtt_rx_disable(const struct device *dev)
{
/* Asynchronous RX not supported, see uart_rtt_rx_enable */
ARG_UNUSED(dev);
return -EFAULT;
}
static int uart_rtt_rx_buf_rsp(const struct device *dev,
uint8_t *buf, size_t len)
{
/* Asynchronous RX not supported, see uart_rtt_rx_enable */
ARG_UNUSED(dev);
ARG_UNUSED(buf);
ARG_UNUSED(len);
return -ENOTSUP;
}
#endif /* CONFIG_UART_ASYNC_API */
static const struct uart_driver_api uart_rtt_driver_api = {
.poll_in = uart_rtt_poll_in,
.poll_out = uart_rtt_poll_out,
#ifdef CONFIG_UART_ASYNC_API
.callback_set = uart_rtt_callback_set,
.tx = uart_rtt_tx,
.tx_abort = uart_rtt_tx_abort,
.rx_enable = uart_rtt_rx_enable,
.rx_buf_rsp = uart_rtt_rx_buf_rsp,
.rx_disable = uart_rtt_rx_disable,
#endif /* CONFIG_UART_ASYNC_API */
};
#define UART_RTT(idx) DT_NODELABEL(rtt##idx)
#define UART_RTT_PROP(idx, prop) DT_PROP(UART_RTT(idx), prop)
#define UART_RTT_CONFIG_NAME(idx) uart_rtt##idx##_config
#define UART_RTT_CONFIG(idx) \
static \
uint8_t uart_rtt##idx##_tx_buf[UART_RTT_PROP(idx, tx_buffer_size)]; \
static \
uint8_t uart_rtt##idx##_rx_buf[UART_RTT_PROP(idx, rx_buffer_size)]; \
\
static const struct uart_rtt_config UART_RTT_CONFIG_NAME(idx) = { \
.up_buffer = uart_rtt##idx##_tx_buf, \
.up_size = sizeof(uart_rtt##idx##_tx_buf), \
.down_buffer = uart_rtt##idx##_rx_buf, \
.down_size = sizeof(uart_rtt##idx##_rx_buf), \
}
#define UART_RTT_INIT(idx, config) \
struct uart_rtt_data uart_rtt##idx##_data; \
\
DEVICE_DT_DEFINE(UART_RTT(idx), uart_rtt_init, NULL, \
&uart_rtt##idx##_data, config, \
PRE_KERNEL_2, CONFIG_SERIAL_INIT_PRIORITY, \
&uart_rtt_driver_api)
#ifdef CONFIG_UART_RTT_0
UART_RTT_INIT(0, NULL);
#endif
#ifdef CONFIG_UART_RTT_1
UART_RTT_CONFIG(1);
UART_RTT_INIT(1, &UART_RTT_CONFIG_NAME(1));
#endif
#ifdef CONFIG_UART_RTT_2
UART_RTT_CONFIG(2);
UART_RTT_INIT(2, &UART_RTT_CONFIG_NAME(2));
#endif
#ifdef CONFIG_UART_RTT_3
UART_RTT_CONFIG(3);
UART_RTT_INIT(3, &UART_RTT_CONFIG_NAME(3));
#endif