| # Copyright (c) 2014-2015 Wind River Systems, Inc. |
| # Copyright (c) 2016 Cadence Design Systems, Inc. |
| # Copyright (c) 2019 Intel Corp. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig APIC_TIMER |
| bool "New local APIC timer" |
| depends on X86 |
| depends on LOAPIC |
| select TICKLESS_CAPABLE |
| help |
| Use the x86 local APIC in one-shot mode as the system time |
| source. NOTE: this probably isn't what you want except on |
| older or idiosyncratic hardware (or environments like qemu |
| without complete APIC emulation). Modern hardware will work |
| better with CONFIG_APIC_TSC_DEADLINE_TIMER. |
| |
| if APIC_TIMER |
| |
| config APIC_TIMER_IRQ |
| int "Local APIC timer IRQ" |
| default 24 |
| help |
| This option specifies the IRQ used by the local APIC timer. |
| Note: this MUST be set to the index immediately after the |
| last IO-APIC IRQ (the timer is the first entry in the APIC |
| local vector table). This footgun is not intended to be |
| user-configurable and almost certainly should be managed via |
| a different mechanism. |
| |
| config APIC_TIMER_TSC |
| bool "Use invariant TSC for sys_clock_cycle_get_32()" |
| select TIMER_HAS_64BIT_CYCLE_COUNTER |
| help |
| If your CPU supports invariant TSC, and you know the ratio of the |
| TSC frequency to CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC (the local APIC |
| timer frequency), then enable this for a much faster and more |
| accurate sys_clock_cycle_get_32(). |
| |
| if APIC_TIMER_TSC |
| |
| config APIC_TIMER_TSC_N |
| int "TSC to local APIC timer frequency multiplier (N)" |
| default 1 |
| |
| config APIC_TIMER_TSC_M |
| int "TSC to local APIC timer frequency divisor (M)" |
| default 1 |
| |
| endif # APIC_TIMER_TSC |
| |
| endif # APIC_TIMER |
| |
| config APIC_TSC_DEADLINE_TIMER |
| bool "Even newer APIC timer using TSC deadline mode" |
| depends on X86 |
| select LOAPIC |
| select TICKLESS_CAPABLE |
| select TIMER_HAS_64BIT_CYCLE_COUNTER |
| help |
| Extremely simple timer driver based the local APIC TSC |
| deadline capability. The use of a free-running 64 bit |
| counter with comparator eliminates almost all edge cases |
| from the handling, and the near-instruction-cycle resolution |
| permits effectively unlimited precision where needed (the |
| limit becomes the CPU time taken to execute the timing |
| logic). SMP-safe and very fast, this should be the obvious |
| choice for any x86 device with invariant TSC and TSC |
| deadline capability. |
| |
| config APIC_TIMER_IRQ_PRIORITY |
| int "Local APIC timer interrupt priority" |
| depends on APIC_TIMER || APIC_TSC_DEADLINE_TIMER |
| default 4 |
| help |
| This option specifies the interrupt priority used by the |
| local APIC timer. |
