/*
 * Copyright (c) 2018 Endre Karlson <endre.karlson@gmail.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/**
 * @file
 * @brief System/hardware module for STM32L0 processor
 */

#include <zephyr/device.h>
#include <zephyr/init.h>
#include <zephyr/arch/cpu.h>
#include <zephyr/arch/arm/aarch32/cortex_m/cmsis.h>
#include <zephyr/arch/arm/aarch32/nmi.h>
#include <zephyr/irq.h>
#include <zephyr/linker/linker-defs.h>
#include <string.h>
#include <stm32_ll_bus.h>
#include <stm32_ll_pwr.h>
#include <stm32_ll_bus.h>

/**
 * @brief Perform basic hardware initialization at boot.
 *
 * This needs to be run from the very beginning.
 * So the init priority has to be 0 (zero).
 *
 * @return 0
 */
static int stm32l0_init(void)
{
	uint32_t key;


	key = irq_lock();

	/* Install default handler that simply resets the CPU
	 * if configured in the kernel, NOP otherwise
	 */
	NMI_INIT();

	irq_unlock(key);

	/* Update CMSIS SystemCoreClock variable (HCLK) */
	/* At reset, system core clock is set to 2.1 MHz from MSI */
	SystemCoreClock = 2097152;

	/* Default Voltage scaling range selection (range2)
	 * doesn't allow to configure Max frequency
	 * switch to range1 to match any frequency
	 */
	LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_PWR);
	LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);

	/* On STM32L0, there are some hardfault when enabling DBGMCU bit:
	 * Sleep, Stop or Standby.
	 * See https://github.com/zephyrproject-rtos/zephyr/issues/#37119
	 * For unclear reason, enabling DMA clock fixes this issue
	 * (similarly than it fixes
	 * https://github.com/zephyrproject-rtos/zephyr/issues/#34324 )
	 */
	LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1);

	return 0;
}

SYS_INIT(stm32l0_init, PRE_KERNEL_1, 0);