# Copyright 2017-2024 NXP
# SPDX-License-Identifier: Apache-2.0

if SOC_FAMILY_NXP_IMXRT

# Source series Kconfig files first, so SOCs
# can override the defaults given here
rsource "*/Kconfig.defconfig"

if SOC_SERIES_IMXRT10XX || SOC_SERIES_IMXRT11XX

config SERIAL_INIT_PRIORITY
	default 55 if SERIAL
	depends on SERIAL

config ROM_START_OFFSET
	default 0x400 if BOOTLOADER_MCUBOOT
	default 0x2000 if BOOT_FLEXSPI_NOR || BOOT_SEMC_NOR

config PINCTRL_IMX
	default y if HAS_MCUX_IOMUXC
	depends on PINCTRL

config ADC_MCUX_12B1MSPS_SAR
	default y if HAS_MCUX_12B1MSPS_SAR
	depends on ADC

config LOG_BACKEND_SWO_FREQ_HZ
	default 7500000
	depends on LOG_BACKEND_SWO

# set the tick per sec as a divider of the GPT clock source
config SYS_CLOCK_TICKS_PER_SEC
	default 4096 if MCUX_GPT_TIMER

DT_SYSCLK_PATH := $(dt_nodelabel_path,sysclk)

config SYS_CLOCK_HW_CYCLES_PER_SEC
	default $(dt_node_int_prop_int,$(DT_SYSCLK_PATH),clock-frequency) if SOC_SERIES_IMXRT10XX && CORTEX_M_SYSTICK
	default 32768 if MCUX_GPT_TIMER

# Disable systick if using MCUX_GPT_TIMER, as they will conflict
config CORTEX_M_SYSTICK
	default n if MCUX_GPT_TIMER

config PM_MCUX_GPC
	default y if HAS_MCUX_GPC
	depends on SOC_SERIES_IMXRT11XX && PM

# Don't allow SOC to sleep after tests complete when PM is enabled
config ZTEST_NO_YIELD
	default y if (ZTEST && PM)

if SOC_SERIES_IMXRT10XX && PM

config CODE_DATA_RELOCATION
	default y

config PM_MCUX_GPC
	default y if HAS_MCUX_GPC

config PM_MCUX_DCDC
	default y if HAS_MCUX_DCDC

config PM_MCUX_PMU
	default y if HAS_MCUX_PMU

endif # SOC_SERIES_IMXRT10XX && PM

if ETH_NXP_ENET

config SYSTEM_WORKQUEUE_STACK_SIZE
	default 1560

endif # ETH_NXP_ENET

config MEMC
	default y

choice USB_MCUX_CONTROLLER_TYPE
	default USB_DC_NXP_EHCI
endchoice

DT_CHOSEN_Z_DTCM := zephyr,dtcm

choice SEGGER_RTT_SECTION
	default SEGGER_RTT_SECTION_DTCM if $(dt_chosen_enabled,$(DT_CHOSEN_Z_DTCM))
	depends on USE_SEGGER_RTT
endchoice

choice SEGGER_SYSVIEW_SECTION
	default SEGGER_SYSVIEW_SECTION_DTCM if $(dt_chosen_enabled,$(DT_CHOSEN_Z_DTCM))
	depends on SEGGER_SYSTEMVIEW
endchoice

#
# MBEDTLS is larger but much faster than TinyCrypt so choose wisely
#
config MBEDTLS
#config TINYCRYPT
	default y if CSPRNG_ENABLED
	depends on ENTROPY_GENERATOR

if MBEDTLS
#
# MBEDTLS CTR_DRBG code path needs extra stack space for initialization than
# what the ztest_thread_stack defaults to.
#
config TEST_EXTRA_STACK_SIZE
	int
	default 1024
endif # MBEDTLS

# Enable cache management features when using M7 core, since these parts
# have L1 instruction and data caches that should be enabled at boot
config CACHE_MANAGEMENT
	default y if CPU_CORTEX_M7

endif # SOC_SERIES_IMXRT10XX || SOC_SERIES_IMXRT11XX

# Logic to set flash size for all IMXRT parts
DT_CHOSEN_Z_FLASH := zephyr,flash
DT_COMPAT_FLEXSPI := nxp,imx-flexspi

DT_CHOSEN_FLASH_NODE := $(dt_chosen_path,$(DT_CHOSEN_Z_FLASH))
DT_CHOSEN_FLASH_PARENT := $(dt_node_parent,$(DT_CHOSEN_FLASH_NODE))

DT_FLASH_PARENT_IS_FLEXSPI := $(dt_node_has_compat,$(DT_CHOSEN_FLASH_PARENT),$(DT_COMPAT_FLEXSPI))
DT_FLASH_HAS_SIZE_PROP := $(dt_node_has_prop,$(DT_CHOSEN_FLASH_NODE),size)

config FLASH_BASE_ADDRESS
	default $(dt_node_reg_addr_hex,$(DT_CHOSEN_FLASH_PARENT),1) \
		if $(DT_FLASH_PARENT_IS_FLEXSPI)

config FLASH_SIZE
	default $(dt_node_int_prop_int,$(DT_CHOSEN_FLASH_NODE),size,Kb) \
		if $(DT_FLASH_HAS_SIZE_PROP)

if FLASH_MCUX_FLEXSPI_XIP

# Avoid RWW hazards by defaulting logging to disabled
choice FLASH_LOG_LEVEL_CHOICE
	default FLASH_LOG_LEVEL_OFF
endchoice

choice MEMC_LOG_LEVEL_CHOICE
	default MEMC_LOG_LEVEL_OFF
endchoice

endif

endif # SOC_FAMILY_NXP_IMXRT