# Copyright 2024 NXP
# SPDX-License-Identifier: Apache-2.0

config SOC_FAMILY_NXP_IMXRT
	select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE

if SOC_FAMILY_NXP_IMXRT

# Source series Kconfig files first, so SOCs
# can override the defaults given here
rsource "*/Kconfig"

# Used for default value in FLASH_MCUX_FLEXSPI_XIP
DT_CHOSEN_Z_FLASH := zephyr,flash
DT_COMPAT_FLEXSPI := nxp,imx-flexspi
# Macros to shorten Kconfig definitions
DT_CHOSEN_FLASH_NODE := $(dt_chosen_path,$(DT_CHOSEN_Z_FLASH))
DT_CHOSEN_FLASH_PARENT := $(dt_node_parent,$(DT_CHOSEN_FLASH_NODE))

config FLASH_MCUX_FLEXSPI_XIP
	bool "MCUX FlexSPI flash access with xip"
	default $(dt_node_has_compat,$(DT_CHOSEN_FLASH_PARENT),$(DT_COMPAT_FLEXSPI))
	select XIP
	help
	  Allows for the soc to safely initialize the clocks for the
	  FlexSpi when planning to execute code in FlexSpi Memory.

if FLASH_MCUX_FLEXSPI_XIP && MEMC_MCUX_FLEXSPI

choice FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET
	prompt "FlexSPI drivers relocation target"
	default FLASH_MCUX_FLEXSPI_XIP_MEM_ITCM
	help
	  Select the location to run the FlexSPI drivers when using
	  the flash API.

config FLASH_MCUX_FLEXSPI_XIP_MEM_ITCM
	bool "ITCM"
	select CODE_DATA_RELOCATION

config FLASH_MCUX_FLEXSPI_XIP_MEM_SRAM
	bool "RAM"
	select CODE_DATA_RELOCATION_SRAM

endchoice

config FLASH_MCUX_FLEXSPI_XIP_MEM
	string
	default "ITCM" if FLASH_MCUX_FLEXSPI_XIP_MEM_ITCM
	default "RAM" if FLASH_MCUX_FLEXSPI_XIP_MEM_SRAM

endif # FLASH_MCUX_FLEXSPI_XIP && MEMC_MCUX_FLEXSPI

# Note- When SECOND_CORE_MCUX is set, the dependencies for this Kconfig
# should be set elsewhere, since the determination of which SOC core
# requires the boot header is SOC specific.
config NXP_IMXRT_BOOT_HEADER
	bool "Boot header"
	default y
	depends on !(BOOTLOADER_MCUBOOT || SECOND_CORE_MCUX)
	help
	  Enable data structures required by the boot ROM to boot the
	  application from an external flash device.

if NXP_IMXRT_BOOT_HEADER

choice BOOT_DEVICE
	prompt "Boot device"
	default BOOT_FLEXSPI_NOR

config BOOT_FLEXSPI_NOR
	bool "FlexSPI serial NOR"
	depends on HAS_MCUX_FLEXSPI

config BOOT_FLEXSPI_NAND
	bool "FlexSPI serial NAND"
	depends on HAS_MCUX_FLEXSPI

config BOOT_SEMC_NOR
	bool "SEMC parallel NOR"
	depends on HAS_MCUX_SEMC

config BOOT_SEMC_NAND
	bool "SEMC parallel NAND"
	depends on HAS_MCUX_SEMC

endchoice # BOOT_DEVICE

config FLEXSPI_CONFIG_BLOCK_OFFSET
	hex "FlexSPI config block offset"
	default 0x400 if SOC_SERIES_IMXRT5XX || SOC_SERIES_IMXRT6XX || SOC_MIMXRT1011
	default 0x0 if BOOT_FLEXSPI_NOR
	help
	  FlexSPI configuration block consists of parameters regarding specific
	  flash devices including read command sequence, quad mode enablement
	  sequence (optional), etc. The boot ROM expects FlexSPI configuration
	  parameter to be presented in serial nor flash.

config IMAGE_VECTOR_TABLE_OFFSET
	hex "Image vector table offset"
	default 0x1000 if BOOT_FLEXSPI_NOR || BOOT_SEMC_NOR
	default 0x400 if BOOT_FLEXSPI_NAND || BOOT_SEMC_NAND
	help
	  The Image Vector Table (IVT) provides the boot ROM with pointers to
	  the application entry point and device configuration data. The boot
	  ROM requires a fixed IVT offset for each type of boot device.

config DEVICE_CONFIGURATION_DATA
	bool "Device configuration data"
	help
	  Device configuration data (DCD) provides a sequence of commands to
	  the boot ROM to initialize components such as an SDRAM. This is
	  useful if your application expects components like SDRAM to be
	  initialized at boot time.


endif # NXP_IMXRT_BOOT_HEADER

config NXP_IMX_EXTERNAL_SDRAM
	bool "Allow access to external SDRAM region"
	help
	  Enable access to external SDRAM region managed by the SEMC. This
	  setting should be enabled when the application uses SDRAM, or
	  an MPU region will be defined to disable cached access to the
	  SDRAM memory space.

config NXP_IMX_RT_ROM_RAMLOADER
	depends on !FLASH_MCUX_FLEXSPI_XIP && NXP_IMXRT_BOOT_HEADER
	# Required so that debugger will load image to correct offset
	select BUILD_OUTPUT_HEX
	bool "Create output image that IMX RT ROM can load from FlexSPI to ram"
	help
	  Builds an output image that the IMX RT BootROM can load from the
	  FlexSPI boot device into RAM region. The image will be loaded
	  from FLEXSPI into the region specified by `zephyr,flash` node.

# Setup LMA adjustment if using the RAMLOADER feature of ROM
FLASH_CHOSEN := zephyr,flash
FLASH_BASE := $(dt_chosen_reg_addr_hex,$(FLASH_CHOSEN))
FLEXSPI_BASE := $(dt_node_reg_addr_hex,/soc/spi@402a8000,1)
config BUILD_OUTPUT_ADJUST_LMA
	default "$(FLEXSPI_BASE) - $(FLASH_BASE)" if NXP_IMX_RT_ROM_RAMLOADER

config SECOND_CORE_MCUX
	bool "Dual core operation on the RT11xx series"
	depends on SOC_SERIES_IMXRT11XX
	help
	  Indicates the second core will be enabled, and the part will run
	  in dual core mode. Enables dual core operation on the RT11xx series,
	  by booting an image targeting the Cortex-M4 from the Cortex-M7 CPU.
	  The M4 image will be loaded from flash into RAM based off a
	  generated header specifying the VMA and LMA of each memory section
	  to load


config FLEXSPI_CONFIG_BLOCK_OFFSET
	hex
	default 0x400 if SOC_SERIES_IMXRT10XX || SOC_SERIES_IMXRT11XX

if SOC_SERIES_IMXRT10XX || SOC_SERIES_IMXRT11XX

config PM_MCUX_GPC
	bool "MCUX general power controller driver"

config PM_MCUX_DCDC
	bool "MCUX dcdc converter module driver"

config PM_MCUX_PMU
	bool "MCUX power management unit driver"

config DCDC_VALUE
	hex "DCDC value for VDD_SOC"

config INIT_ARM_PLL
	bool "Initialize ARM PLL"

config INIT_VIDEO_PLL
	bool "Initialize Video PLL"

config INIT_ENET_PLL
	bool
	help
	  If y, the Ethernet PLL is initialized. Always enabled on e.g.
	  MIMXRT1021 - see commit 17f4d6bec7 ("soc: nxp_imx: fix ENET_PLL selection
	  for MIMXRT1021").

endif # SOC_SERIES_IMXRT10XX || SOC_SERIES_IMXRT11XX

endif # SOC_FAMILY_NXP_IMXRT