# Copyright 2022-2024 NXP
# SPDX-License-Identifier: Apache-2.0

config SOC_SERIES_RW6XX
	select ARM
	select CPU_CORTEX_M33
	select CPU_CORTEX_M_HAS_DWT
	select CLOCK_CONTROL
	select PLATFORM_SPECIFIC_INIT
	select CPU_HAS_ARM_SAU
	select CPU_HAS_ARM_MPU
	select CPU_HAS_FPU
	select HAS_MCUX_OS_TIMER
	select ARM_TRUSTZONE_M
	select CPU_CORTEX_M_HAS_SYSTICK
	select HAS_MCUX
	select HAS_MCUX_FLEXCOMM
	select INIT_SYS_PLL
	select HAS_MCUX_CACHE

if SOC_SERIES_RW6XX

config INIT_SYS_PLL
	bool "Initialize SYS PLL"

menuconfig NXP_RW6XX_BOOT_HEADER
	bool "Create boot header"
	default y if !BOOTLOADER_MCUBOOT
	help
	  Create data structures required by the boot ROM to boot the
	  application from an external flash device.

if NXP_RW6XX_BOOT_HEADER

choice BOOT_DEVICE
	prompt "Boot device selection"
	default BOOT_FLEXSPI_NOR

config BOOT_FLEXSPI_NOR
	bool "FlexSPI serial NOR"

endchoice

config FLASH_CONFIG_OFFSET
	hex "Flash config data offset"
	default 0x400
	help
	  The flash config offset provides the boot ROM with the on-board
	  flash type and parameters. The boot ROM requires a fixed flash conifg
	  offset for FlexSPI device.

config IMAGE_VECTOR_TABLE_OFFSET
	hex "Image vector table offset"
	default 0x1000
	help
	  The Image Vector Table (IVT) provides the boot ROM with pointers to
	  the application entry point and device configuration data. The boot
	  ROM requires a fixed IVT offset for each type of boot device.

endif # NXP_RW6XX_BOOT_HEADER

# Used for default value in FLASH_MCUX_FLEXSPI_XIP
DT_CHOSEN_Z_FLASH := zephyr,flash
DT_COMPAT_FLEXSPI := nxp,imx-flexspi
# Macros to shorten Kconfig definitions
DT_CHOSEN_FLASH_NODE := $(dt_chosen_path,$(DT_CHOSEN_Z_FLASH))
DT_CHOSEN_FLASH_PARENT := $(dt_node_parent,$(DT_CHOSEN_FLASH_NODE))

config FLASH_MCUX_FLEXSPI_XIP
	bool "MCUX FlexSPI flash access with xip"
	default $(dt_node_has_compat,$(DT_CHOSEN_FLASH_PARENT),$(DT_COMPAT_FLEXSPI))
	select XIP
	help
	  Allows for the soc to safely initialize the clocks for the
	  FlexSpi when planning to execute code in FlexSpi Memory.

config NXP_RW_ROM_RAMLOADER
	depends on !FLASH_MCUX_FLEXSPI_XIP
	# Required so that debugger will load image to correct offset
	select BUILD_OUTPUT_HEX
	bool "Create output image that RW ROM can load from FlexSPI to ram"
	help
	  Builds an output image that the RW BootROM can load from the
	  FlexSPI boot device into RAM region. The image will be loaded
	  from FLEXSPI into the region specified by `zephyr,flash` node.

config FLASH_MCUX_FLEXSPI_XIP_MEM
	string
	default "RAM"
	depends on MEMC_MCUX_FLEXSPI

endif # SOC_SERIES_RW6XX