/*
 * Copyright (c) 2021, NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <nxp/nxp_rt117x.dtsi>

/ {
	cpus {
		/delete-node/ cpu@1;
	};
	/*
	 * ITCM & DTCM are available only to the M7 core. EDMA interrupts are connected
	 * to the M7 core alone, hence this EDMA controller has been designated M7 only.
	 * GPIO 6 is available to both M4 and M7 cores, however the GPIO interrupt is
	 * only accesssible to the M7.
	 *
	 * Refer to Chapter 3 of the Reference Manual
	 */
	soc {
		flexram: flexram@40028000 {
			reg = <0x40028000 0x4000>;
			interrupts = <50 0>;

			#address-cells = <1>;
			#size-cells = <1>;

			itcm: itcm@0 {
				compatible = "nxp,imx-itcm";
				reg = <0x00000000 DT_SIZE_K(256)>;
			};

			dtcm: dtcm@20000000 {
				compatible = "nxp,imx-dtcm";
				reg = <0x20000000 DT_SIZE_K(256)>;
			};
		};

		edma0: dma-controller@40070000 {
			#dma-cells = <2>;
			compatible = "nxp,mcux-edma";
			dma-channels = <32>;
			dma-requests = <128>;
			nxp,mem2mem;
			nxp,a_on;
			reg = <0x40070000 0x4000>,
				<0x40074000 0x4000>;
			clocks = <&ccm IMX_CCM_EDMA_CLK 0x7C 0x000000C0>;
				status = "disabled";
			label = "EDMA0";
			interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
				<4 0>, <5 0>, <6 0>, <7 0>,
				<8 0>, <9 0>, <10 0>, <11 0>,
				<12 0>, <13 0>, <14 0>, <15 0>,
				<16 0>;
		};
	};
};

&gpio6 {
	interrupts = <61 0>, <62 0>;
};