# Kinetis KE1xF MCU line

# Copyright (c) 2019 Vestas Wind Systems A/S
# SPDX-License-Identifier: Apache-2.0

choice
	prompt "Kinetis KE1xF MCU Selection"
	depends on SOC_SERIES_KINETIS_KE1XF

config SOC_MKE14F16
	bool "MKE14F16"

config SOC_MKE16F16
	bool "MKE16F16"
	select HAS_MCUX_FLEXCAN

config SOC_MKE18F16
	bool "MKE18F16"
	select HAS_MCUX_FLEXCAN

endchoice

if SOC_SERIES_KINETIS_KE1XF

config SOC_PART_NUMBER_MKE14F256VLH16
	bool

config SOC_PART_NUMBER_MKE14F256VLL16
	bool

config SOC_PART_NUMBER_MKE14F512VLH16
	bool

config SOC_PART_NUMBER_MKE14F512VLL16
	bool

config SOC_PART_NUMBER_MKE16F256VLH16
	bool

config SOC_PART_NUMBER_MKE16F256VLL16
	bool

config SOC_PART_NUMBER_MKE16F512VLH16
	bool

config SOC_PART_NUMBER_MKE16F512VLL16
	bool

config SOC_PART_NUMBER_MKE18F256VLH16
	bool

config SOC_PART_NUMBER_MKE18F256VLL16
	bool

config SOC_PART_NUMBER_MKE18F512VLH16
	bool

config SOC_PART_NUMBER_MKE18F512VLL16
	bool

config SOC_PART_NUMBER_KINETIS_KE1XF
	string
	default "MKE14F256VLH16" if SOC_PART_NUMBER_MKE14F256VLH16
	default "MKE14F256VLL16" if SOC_PART_NUMBER_MKE14F256VLL16
	default "MKE14F512VLH16" if SOC_PART_NUMBER_MKE14F512VLH16
	default "MKE14F512VLL16" if SOC_PART_NUMBER_MKE14F512VLL16
	default "MKE16F256VLH16" if SOC_PART_NUMBER_MKE16F256VLH16
	default "MKE16F256VLL16" if SOC_PART_NUMBER_MKE16F256VLL16
	default "MKE16F512VLH16" if SOC_PART_NUMBER_MKE16F512VLH16
	default "MKE16F512VLL16" if SOC_PART_NUMBER_MKE16F512VLL16
	default "MKE18F256VLH16" if SOC_PART_NUMBER_MKE18F256VLH16
	default "MKE18F256VLL16" if SOC_PART_NUMBER_MKE18F256VLL16
	default "MKE18F512VLH16" if SOC_PART_NUMBER_MKE18F512VLH16
	default "MKE18F512VLL16" if SOC_PART_NUMBER_MKE18F512VLL16
	help
	  This string holds the full part number of the SoC. It is a
	  hidden option that you should not set directly. The part
	  number selection choice defines the default value for this
	  string.

config WDOG_ENABLE_AT_BOOT
	bool "Keep watchdog timer enabled at boot"
	help
	  Keep the watchdog timer enabled at boot with the internal
	  128kHz LPO clock (and a prescaler of 256) as clock
	  source. The application can take over control of the
	  watchdog timer after boot and install a different timeout,
	  if needed.

config WDOG_INITIAL_TIMEOUT
	int "Initial timeout for the watchdog timer in milliseconds"
	depends on WDOG_ENABLE_AT_BOOT && WDOG_INIT
	range 2 131070
	default 2048
	help
	  Initial timeout value for the watchdog timer in
	  milliseconds.

config KINETIS_KE1XF_ENABLE_CODE_CACHE
	bool "Code cache"
	default y

endif # SOC_SERIES_KINETIS_KE1XF