blob: 9f133f7fc61061f1d347b5e8775a54b3dae4cced [file] [log] [blame]
/*
* Copyright (c) 2018 Linaro Ltd.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT ti_lp3943
/**
* @file
* @brief LP3943 LED driver
*
* Limitations:
* - Blink period and brightness value are controlled by two sets of PSCx/PWMx
* registers. This driver partitions the available LEDs into two groups as
* 0 to 7 and 8 to 15 and assigns PSC0/PWM0 to LEDs from 0 to 7 and PSC1/PWM1
* to LEDs from 8 to 15. So, it is not possible to set unique blink period
* and brightness value for LEDs in a group, changing either of these
* values for a LED will affect other LEDs also.
*/
#include <zephyr/drivers/i2c.h>
#include <zephyr/drivers/led.h>
#include <zephyr/sys/util.h>
#include <zephyr/zephyr.h>
#define LOG_LEVEL CONFIG_LED_LOG_LEVEL
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(lp3943);
#include "led_context.h"
/* LP3943 Registers */
#define LP3943_INPUT_1 0x00
#define LP3943_INPUT_2 0x01
#define LP3943_PSC0 0x02
#define LP3943_PWM0 0x03
#define LP3943_PSC1 0x04
#define LP3943_PWM1 0x05
#define LP3943_LS0 0x06
#define LP3943_LS1 0x07
#define LP3943_LS2 0x08
#define LP3943_LS3 0x09
#define LP3943_MASK 0x03
enum lp3943_modes {
LP3943_OFF,
LP3943_ON,
LP3943_DIM0,
LP3943_DIM1,
};
struct lp3943_config {
struct i2c_dt_spec bus;
};
struct lp3943_data {
struct led_data dev_data;
};
static int lp3943_get_led_reg(uint32_t *led, uint8_t *reg)
{
switch (*led) {
case 0:
case 1:
case 2:
__fallthrough;
case 3:
*reg = LP3943_LS0;
break;
case 4:
case 5:
case 6:
__fallthrough;
case 7:
*reg = LP3943_LS1;
*led -= 4U;
break;
case 8:
case 9:
case 10:
__fallthrough;
case 11:
*reg = LP3943_LS2;
*led -= 8U;
break;
case 12:
case 13:
case 14:
__fallthrough;
case 15:
*reg = LP3943_LS3;
*led -= 12U;
break;
default:
LOG_ERR("Invalid LED specified");
return -EINVAL;
}
return 0;
}
static int lp3943_set_dim_states(const struct lp3943_config *config,
uint32_t led, uint8_t mode)
{
int ret;
uint8_t reg;
ret = lp3943_get_led_reg(&led, &reg);
if (ret) {
return ret;
}
/* Set DIMx states for the LEDs */
if (i2c_reg_update_byte_dt(&config->bus, reg, LP3943_MASK << (led << 1),
mode << (led << 1))) {
LOG_ERR("LED reg update failed");
return -EIO;
}
return 0;
}
static int lp3943_led_blink(const struct device *dev, uint32_t led,
uint32_t delay_on, uint32_t delay_off)
{
const struct lp3943_config *config = dev->config;
struct lp3943_data *data = dev->data;
struct led_data *dev_data = &data->dev_data;
int ret;
uint16_t period;
uint8_t reg, val, mode;
period = delay_on + delay_off;
if (period < dev_data->min_period || period > dev_data->max_period) {
return -EINVAL;
}
/* Use DIM0 for LEDs 0 to 7 and DIM1 for LEDs 8 to 15 */
if (led < 8) {
mode = LP3943_DIM0;
} else {
mode = LP3943_DIM1;
}
if (mode == LP3943_DIM0) {
reg = LP3943_PSC0;
} else {
reg = LP3943_PSC1;
}
val = (period * 255U) / dev_data->max_period;
if (i2c_reg_write_byte_dt(&config->bus, reg, val)) {
LOG_ERR("LED write failed");
return -EIO;
}
ret = lp3943_set_dim_states(config, led, mode);
if (ret) {
return ret;
}
return 0;
}
static int lp3943_led_set_brightness(const struct device *dev, uint32_t led,
uint8_t value)
{
const struct lp3943_config *config = dev->config;
struct lp3943_data *data = dev->data;
struct led_data *dev_data = &data->dev_data;
int ret;
uint8_t reg, val, mode;
if (value < dev_data->min_brightness ||
value > dev_data->max_brightness) {
return -EINVAL;
}
/* Use DIM0 for LEDs 0 to 7 and DIM1 for LEDs 8 to 15 */
if (led < 8) {
mode = LP3943_DIM0;
} else {
mode = LP3943_DIM1;
}
if (mode == LP3943_DIM0) {
reg = LP3943_PWM0;
} else {
reg = LP3943_PWM1;
}
val = (value * 255U) / dev_data->max_brightness;
if (i2c_reg_write_byte_dt(&config->bus, reg, val)) {
LOG_ERR("LED write failed");
return -EIO;
}
ret = lp3943_set_dim_states(config, led, mode);
if (ret) {
return ret;
}
return 0;
}
static inline int lp3943_led_on(const struct device *dev, uint32_t led)
{
const struct lp3943_config *config = dev->config;
int ret;
uint8_t reg, mode;
ret = lp3943_get_led_reg(&led, &reg);
if (ret) {
return ret;
}
/* Set LED state to ON */
mode = LP3943_ON;
if (i2c_reg_update_byte_dt(&config->bus, reg, LP3943_MASK << (led << 1),
mode << (led << 1))) {
LOG_ERR("LED reg update failed");
return -EIO;
}
return 0;
}
static inline int lp3943_led_off(const struct device *dev, uint32_t led)
{
const struct lp3943_config *config = dev->config;
int ret;
uint8_t reg;
ret = lp3943_get_led_reg(&led, &reg);
if (ret) {
return ret;
}
/* Set LED state to OFF */
if (i2c_reg_update_byte_dt(&config->bus, reg, LP3943_MASK << (led << 1),
0)) {
LOG_ERR("LED reg update failed");
return -EIO;
}
return 0;
}
static int lp3943_led_init(const struct device *dev)
{
const struct lp3943_config *config = dev->config;
struct lp3943_data *data = dev->data;
struct led_data *dev_data = &data->dev_data;
if (!device_is_ready(config->bus.bus)) {
LOG_ERR("I2C device not ready");
return -ENODEV;
}
/* Hardware specific limits */
dev_data->min_period = 0U;
dev_data->max_period = 1600U;
dev_data->min_brightness = 0U;
dev_data->max_brightness = 100U;
return 0;
}
static struct lp3943_data lp3943_led_data;
static const struct lp3943_config lp3943_led_config = {
.bus = I2C_DT_SPEC_INST_GET(0),
};
static const struct led_driver_api lp3943_led_api = {
.blink = lp3943_led_blink,
.set_brightness = lp3943_led_set_brightness,
.on = lp3943_led_on,
.off = lp3943_led_off,
};
DEVICE_DT_INST_DEFINE(0, &lp3943_led_init, NULL, &lp3943_led_data,
&lp3943_led_config, POST_KERNEL, CONFIG_LED_INIT_PRIORITY,
&lp3943_led_api);