blob: a8243062cc4f4685ca23009e16f5e8ba140693e4 [file] [log] [blame]
/*
* Copyright (c) 2020 Seagate Technology LLC
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT ti_lp503x
/**
* @file
* @brief LP503x LED controller
*/
#include <zephyr/drivers/i2c.h>
#include <zephyr/drivers/led.h>
#include <zephyr/drivers/led/lp503x.h>
#include <zephyr/device.h>
#include <zephyr/zephyr.h>
#define LOG_LEVEL CONFIG_LED_LOG_LEVEL
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(lp503x);
#define LP503X_DEVICE_CONFIG0 0
#define CONFIG0_CHIP_EN BIT(6)
#define LP503X_DEVICE_CONFIG1 0x1
#define CONFIG1_LED_GLOBAL_OFF BIT(0)
#define CONFIG1_MAX_CURRENT_OPT BIT(1)
#define CONFIG1_PWM_DITHERING_EN BIT(2)
#define CONFIG1_AUTO_INCR_EN BIT(3)
#define CONFIG1_POWER_SAVE_EN BIT(4)
#define CONFIG1_LOG_SCALE_EN BIT(5)
#define LP503X_LED_CONFIG0 0x2
#define CONFIG0_LED0_BANK_EN BIT(0)
#define CONFIG0_LED1_BANK_EN BIT(1)
#define CONFIG0_LED2_BANK_EN BIT(2)
#define CONFIG0_LED3_BANK_EN BIT(3)
#define CONFIG0_LED4_BANK_EN BIT(4)
#define CONFIG0_LED5_BANK_EN BIT(5)
#define CONFIG0_LED6_BANK_EN BIT(6)
#define CONFIG0_LED7_BANK_EN BIT(7)
#define LP503X_LED_CONFIG1 0x3
#define CONFIG1_LED8_BANK_EN BIT(0)
#define CONFIG1_LED9_BANK_EN BIT(1)
#define CONFIG1_LED10_BANK_EN BIT(2)
#define CONFIG1_LED11_BANK_EN BIT(3)
#define LP503X_BANK_BRIGHTNESS 0x4
#define LP503X_BANK_A_COLOR 0x5
#define LP503X_BANK_B_COLOR 0x6
#define LP503X_BANK_C_COLOR 0x7
#define LP503X_LED_BRIGHTNESS_BASE 0x8
#define LP503X_OUT_COLOR_BASE 0x14
/* Expose channels starting from the bank registers. */
#define LP503X_CHANNEL_BASE LP503X_BANK_BRIGHTNESS
struct lp503x_config {
struct i2c_dt_spec bus;
uint8_t num_leds;
bool log_scale_en;
bool max_curr_opt;
const struct led_info *leds_info;
};
struct lp503x_data {
uint8_t *chan_buf;
};
static const struct led_info *
lp503x_led_to_info(const struct lp503x_config *config, uint32_t led)
{
int i;
for (i = 0; i < config->num_leds; i++) {
if (config->leds_info[i].index == led) {
return &config->leds_info[i];
}
}
return NULL;
}
static int lp503x_get_info(const struct device *dev, uint32_t led,
const struct led_info **info)
{
const struct lp503x_config *config = dev->config;
const struct led_info *led_info = lp503x_led_to_info(config, led);
if (!led_info) {
return -EINVAL;
}
*info = led_info;
return 0;
}
static int lp503x_set_brightness(const struct device *dev,
uint32_t led, uint8_t value)
{
const struct lp503x_config *config = dev->config;
const struct led_info *led_info = lp503x_led_to_info(config, led);
uint8_t buf[2];
if (!led_info || value > 100) {
return -EINVAL;
}
buf[0] = LP503X_LED_BRIGHTNESS_BASE + led_info->index;
buf[1] = (value * 0xff) / 100;
return i2c_write_dt(&config->bus, buf, sizeof(buf));
}
static int lp503x_on(const struct device *dev, uint32_t led)
{
return lp503x_set_brightness(dev, led, 100);
}
static int lp503x_off(const struct device *dev, uint32_t led)
{
return lp503x_set_brightness(dev, led, 0);
}
static int lp503x_set_color(const struct device *dev, uint32_t led,
uint8_t num_colors, const uint8_t *color)
{
const struct lp503x_config *config = dev->config;
const struct led_info *led_info = lp503x_led_to_info(config, led);
uint8_t buf[4];
if (!led_info || num_colors != led_info->num_colors) {
return -EINVAL;
}
buf[0] = LP503X_OUT_COLOR_BASE + 3 * led_info->index;
buf[1] = color[0];
buf[2] = color[1];
buf[3] = color[2];
return i2c_write_dt(&config->bus, buf, sizeof(buf));
}
static int lp503x_write_channels(const struct device *dev,
uint32_t start_channel,
uint32_t num_channels, const uint8_t *buf)
{
const struct lp503x_config *config = dev->config;
struct lp503x_data *data = dev->data;
if (start_channel >= LP503X_NUM_CHANNELS ||
start_channel + num_channels > LP503X_NUM_CHANNELS) {
return -EINVAL;
}
/*
* Unfortunately this controller don't support commands split into
* two I2C messages.
*/
data->chan_buf[0] = LP503X_CHANNEL_BASE + start_channel;
memcpy(data->chan_buf + 1, buf, num_channels);
return i2c_write_dt(&config->bus, data->chan_buf, num_channels + 1);
}
static int lp503x_init(const struct device *dev)
{
const struct lp503x_config *config = dev->config;
uint8_t buf[3];
int err;
if (!device_is_ready(config->bus.bus)) {
LOG_ERR("I2C device not ready");
return -ENODEV;
}
if (config->num_leds > LP503X_MAX_LEDS) {
LOG_ERR("%s: invalid number of LEDs %d (max %d)",
dev->name, config->num_leds, LP503X_MAX_LEDS);
return -EINVAL;
}
/*
* Since the status of the LP503x controller is unknown when entering
* this function, and since there is no way to reset it, then the whole
* configuration must be applied.
*/
/* Disable bank control for all LEDs. */
buf[0] = LP503X_LED_CONFIG0;
buf[1] = 0;
buf[2] = 0;
err = i2c_write_dt(&config->bus, buf, 3);
if (err < 0) {
return err;
}
/* Enable LED controller. */
buf[0] = LP503X_DEVICE_CONFIG0;
buf[1] = CONFIG0_CHIP_EN;
err = i2c_write_dt(&config->bus, buf, 2);
if (err < 0) {
return err;
}
/* Apply configuration. */
buf[0] = LP503X_DEVICE_CONFIG1;
buf[1] = CONFIG1_PWM_DITHERING_EN | CONFIG1_AUTO_INCR_EN
| CONFIG1_POWER_SAVE_EN;
if (config->max_curr_opt) {
buf[1] |= CONFIG1_MAX_CURRENT_OPT;
}
if (config->log_scale_en) {
buf[1] |= CONFIG1_LOG_SCALE_EN;
}
return i2c_write_dt(&config->bus, buf, 2);
}
static const struct led_driver_api lp503x_led_api = {
.on = lp503x_on,
.off = lp503x_off,
.get_info = lp503x_get_info,
.set_brightness = lp503x_set_brightness,
.set_color = lp503x_set_color,
.write_channels = lp503x_write_channels,
};
#define COLOR_MAPPING(led_node_id) \
const uint8_t color_mapping_##led_node_id[] = \
DT_PROP(led_node_id, color_mapping);
#define LED_INFO(led_node_id) \
{ \
.label = DT_LABEL(led_node_id), \
.index = DT_PROP(led_node_id, index), \
.num_colors = \
DT_PROP_LEN(led_node_id, color_mapping), \
.color_mapping = color_mapping_##led_node_id, \
},
#define LP503x_DEVICE(id) \
\
DT_INST_FOREACH_CHILD(id, COLOR_MAPPING) \
\
const struct led_info lp503x_leds_##id[] = { \
DT_INST_FOREACH_CHILD(id, LED_INFO) \
}; \
\
static uint8_t lp503x_chan_buf_##id[LP503X_NUM_CHANNELS + 1]; \
\
static const struct lp503x_config lp503x_config_##id = { \
.bus = I2C_DT_SPEC_INST_GET(id), \
.num_leds = ARRAY_SIZE(lp503x_leds_##id), \
.max_curr_opt = DT_INST_PROP(id, max_curr_opt), \
.log_scale_en = DT_INST_PROP(id, log_scale_en), \
.leds_info = lp503x_leds_##id, \
}; \
\
static struct lp503x_data lp503x_data_##id = { \
.chan_buf = lp503x_chan_buf_##id, \
}; \
\
DEVICE_DT_INST_DEFINE(id, \
&lp503x_init, \
NULL, \
&lp503x_data_##id, \
&lp503x_config_##id, \
POST_KERNEL, CONFIG_LED_INIT_PRIORITY, \
&lp503x_led_api);
DT_INST_FOREACH_STATUS_OKAY(LP503x_DEVICE)