/*
 * Copyright 2024 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <nxp/nxp_mcxn94x.dtsi>
#include "frdm_mcxn947.dtsi"

/ {
	model = "NXP FRDM_N94 board";
	compatible = "nxp,mcxn947", "nxp,mcx";

	cpus {
		/delete-node/ cpu@1;
	};

	chosen {
		zephyr,sram = &sram0;
		zephyr,flash = &flash;
		zephyr,flash-controller = &fmu;
		zephyr,code-partition = &slot0_partition;
		zephyr,console = &flexcomm4_lpuart4;
		zephyr,shell-uart = &flexcomm4_lpuart4;
	};

	aliases{
		watchdog0 = &wwdt0;
		pwm-0 = &flexpwm1_pwm0;
	};
};

/*
 * Default for this board is to allocate SRAM0-5 to cpu0 but the
 * application can have an application specific device tree to
 * allocate the SRAM0-7 differently.
 *
 * For example, SRAM0-6 could be allocated to cpu0 with only SRAM7
 * for cpu1. This would require the value of sram0 to have a DT_SIZE_K
 * of 384. You would have to make updates to cpu1 sram settings as well.
 */
&sram0 {
	compatible = "mmio-sram";
	reg = <0x20000000 DT_SIZE_K(320)>;
};

&gpio4 {
	status = "okay";
};

&gpio1 {
	status = "okay";
};

&gpio0 {
	status = "okay";
};

&green_led {
	status = "okay";
};

&red_led {
	status = "okay";
};

&user_button_2 {
	status = "okay";
};

&edma0 {
	status = "okay";
};

&flexcomm1 {
	status = "okay";
};

&flexcomm1_lpspi1 {
	status = "okay";
};

&flexcomm2 {
	status = "okay";
};

&flexcomm2_lpi2c2 {
	status = "okay";
};

/*
 *LPFLEXCOMM supports UART and I2C on the same instance, enable this for
 * LFLEXCOMM2
 */
&flexcomm2_lpuart2 {
	status = "okay";
};

&flexcomm4 {
	status = "okay";
};

&flexcomm4_lpuart4 {
	status = "okay";
};

&flexspi {
	status = "okay";
};

&w25q64jvssiq {
	status = "okay";
};

&dac0 {
	status = "okay";
};

&enet {
	status = "okay";
};

&enet_mac {
	status = "okay";
};

&enet_mdio {
	status = "okay";
};

&wwdt0 {
	status = "okay";
};

&flexpwm1_pwm0 {
	status = "okay";
};