# Copyright (c) 2019 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0

description: Nordic PDM (Pulse Density Modulation interface)

compatible: "nordic,nrf-pdm"

include: [base.yaml, pinctrl-device.yaml]

properties:
  reg:
    required: true

  interrupts:
    required: true

  clk-pin:
    type: int
    deprecated: true
    description: |
      IMPORTANT: This option will only be used if the new pin control driver
      is not enabled.

      The CLK pin to use.

      For pins P0.0 through P0.31, use the pin number. For example,
      to use P0.16 for CLK, set:

          clk-pin = <16>;

      For pins P1.0 through P1.31, add 32 to the pin number. For
      example, to use P1.2 for CLK, set:

          clk-pin = <34>;  /* 32 + 2 */

  din-pin:
    type: int
    deprecated: true
    description: |
      IMPORTANT: This option will only be used if the new pin control driver
      is not enabled.

      The DIN pin to use. The pin numbering scheme is the same as
      the clk-pin property's.

  clock-source:
    type: string
    default: "PCLK32M_HFXO"
    description: |
      Clock source to be used by the PDM peripheral. The following options
      are available:
      - "PCLK32M": 32 MHz peripheral clock, synchronous to HFCLK
      - "PCLK32M_HFXO": PCLK32M running off the 32 MHz crystal oscillator
        (HFXO) for better clock accuracy and jitter performance
      - "ACLK": Audio PLL clock with configurable frequency (frequency for
        this clock must be set via the "hfclkaudio-frequency" property
        in the "nordic,nrf-clock" node); this clock source is only available
        in the nRF53 Series SoCs and it requires the use of HFXO
    enum:
      - "PCLK32M"
      - "PCLK32M_HFXO"
      - "ACLK"

  queue-size:
    type: int
    default: 4
    description: |
      Size of the queue of received audio data blocks to be used
      by the driver.