ext/hal/ti/simplelink/source/ti/devices/cc13x2_cc26x2/driverlib/aux_tdc.c

/******************************************************************************
*  Filename:       aux_tdc.c
*  Revised:        2017-04-26 18:27:45 +0200 (Wed, 26 Apr 2017)
*  Revision:       48852
*
*  Description:    Driver for the AUX Time to Digital Converter interface.
*
*  Copyright (c) 2015 - 2017, Texas Instruments Incorporated
*  All rights reserved.
*
*  Redistribution and use in source and binary forms, with or without
*  modification, are permitted provided that the following conditions are met:
*
*  1) Redistributions of source code must retain the above copyright notice,
*     this list of conditions and the following disclaimer.
*
*  2) Redistributions in binary form must reproduce the above copyright notice,
*     this list of conditions and the following disclaimer in the documentation
*     and/or other materials provided with the distribution.
*
*  3) Neither the name of the ORGANIZATION nor the names of its contributors may
*     be used to endorse or promote products derived from this software without
*     specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
*  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
*  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
*  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
*  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
*  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
*  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
*  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
*  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
*  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
*  POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/

#include "aux_tdc.h"

//*****************************************************************************
//
// Handle support for DriverLib in ROM:
// This section will undo prototype renaming made in the header file
//
//*****************************************************************************
#if !defined(DOXYGEN)
    #undef  AUXTDCConfigSet
    #define AUXTDCConfigSet                 NOROM_AUXTDCConfigSet
    #undef  AUXTDCMeasurementDone
    #define AUXTDCMeasurementDone           NOROM_AUXTDCMeasurementDone
#endif

//*****************************************************************************
//
// Configure the operation of the AUX TDC
//
//*****************************************************************************
void
AUXTDCConfigSet(uint32_t ui32Base, uint32_t ui32StartCondition,
                uint32_t ui32StopCondition)
{
    // Check the arguments.
    ASSERT(AUXTDCBaseValid(ui32Base));

    // Make sure the AUX TDC is in the idle state before changing the
    // configuration.
    while(!((HWREG(ui32Base + AUX_TDC_O_STAT) & AUX_TDC_STAT_STATE_M) ==
            AUX_TDC_STAT_STATE_IDLE))
    {
    }

    // Clear previous results.
    HWREG(ui32Base + AUX_TDC_O_CTL) = 0x0;

    // Change the configuration.
    HWREG(ui32Base + AUX_TDC_O_TRIGSRC) = ui32StartCondition | ui32StopCondition;
}

//*****************************************************************************
//
// Check if the AUX TDC is done measuring
//
//*****************************************************************************
uint32_t
AUXTDCMeasurementDone(uint32_t ui32Base)
{
    uint32_t ui32Reg;
    uint32_t ui32Status;

    // Check the arguments.
    ASSERT(AUXTDCBaseValid(ui32Base));

    // Check if the AUX TDC is done measuring.
    ui32Reg = HWREG(ui32Base + AUX_TDC_O_STAT);
    if(ui32Reg & AUX_TDC_STAT_DONE)
    {
        ui32Status = AUX_TDC_DONE;
    }
    else if(ui32Reg & AUX_TDC_STAT_SAT)
    {
        ui32Status = AUX_TDC_TIMEOUT;
    }
    else
    {
        ui32Status = AUX_TDC_BUSY;
    }

    // Return the status.
    return (ui32Status);
}