# Nordic Semiconductor nRF53 MCU line

# Copyright (c) 2019 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0

if SOC_SERIES_NRF53X
config SOC_NRF5340_CPUAPP
	bool
	select CPU_HAS_NRF_IDAU
	select CPU_HAS_FPU
	select ARMV8_M_DSP

config SOC_NRF5340_CPUNET
	bool
	select HAS_NO_PM

choice
	prompt "nRF53x MCU Selection"

config SOC_NRF5340_CPUAPP_QKAA
	bool "NRF5340_CPUAPP_QKAA"
	select SOC_NRF5340_CPUAPP

config SOC_NRF5340_CPUNET_QKAA
	bool "NRF5340_CPUNET_QKAA"
	select SOC_NRF5340_CPUNET

endchoice


if SOC_NRF5340_CPUAPP

config SOC_DCDC_NRF53X_APP
	bool
	help
	  Enable nRF53 series System on Chip Application MCU DC/DC converter.

config SOC_DCDC_NRF53X_NET
	bool
	help
	  Enable nRF53 series System on Chip Network MCU DC/DC converter.

config SOC_DCDC_NRF53X_HV
	bool
	help
	  Enable nRF53 series System on Chip High Voltage DC/DC converter.

config SOC_NRF_GPIO_FORWARDER_FOR_NRF5340
	bool
	depends on NRF_SOC_SECURE_SUPPORTED
	help
	  hidden option for including the nRF GPIO pin forwarding

if !TRUSTED_EXECUTION_NONSECURE || BUILD_WITH_TFM

config SOC_ENABLE_LFXO
	bool "LFXO"
	default y
	help
	  Enable the low-frequency oscillator (LFXO) functionality on XL1 and
	  XL2 pins.
	  This option must be enabled if either application or network core is
	  to use the LFXO. Otherwise, XL1 and XL2 pins will behave as regular
	  GPIOs.

choice SOC_LFXO_LOAD_CAPACITANCE
	prompt "LFXO load capacitance"
	depends on SOC_ENABLE_LFXO
	default SOC_LFXO_CAP_INT_7PF

config SOC_LFXO_CAP_EXTERNAL
	bool "Use external load capacitors"

config SOC_LFXO_CAP_INT_6PF
	bool "6 pF internal load capacitance"

config SOC_LFXO_CAP_INT_7PF
	bool "7 pF internal load capacitance"

config SOC_LFXO_CAP_INT_9PF
	bool "9 pF internal load capacitance"

endchoice

choice SOC_HFXO_LOAD_CAPACITANCE
	prompt "HFXO load capacitance"
	default SOC_HFXO_CAP_DEFAULT

config SOC_HFXO_CAP_DEFAULT
	bool "SoC default"
	help
	  When this option is used, the SoC initialization routine does not
	  touch the XOSC32MCAPS register value, so the default setting for
	  the SoC is in effect. Please note that this may not necessarily be
	  the reset value (0) for the register, as the register can be set
	  during the device trimming in the SystemInit() function.

config SOC_HFXO_CAP_EXTERNAL
	bool "Use external load capacitors"

config SOC_HFXO_CAP_INTERNAL
	bool "Use internal load capacitors"
	depends on NRF_SOC_SECURE_SUPPORTED

endchoice

config SOC_HFXO_CAP_INT_VALUE_X2
	int "Doubled value of HFXO internal load capacitors (in pF)"
	depends on SOC_HFXO_CAP_INTERNAL
	range 14 40
	help
	  Internal capacitors ranging from 7.0 pF to 20.0 pF in 0.5 pF steps
	  can be enabled on pins XC1 and XC2. This option specifies doubled
	  capacitance value for the two capacitors. Set it to 14 to get 7.0 pF
	  for each capacitor, 15 to get 7.5 pF, and so on.

endif # !TRUSTED_EXECUTION_NONSECURE || BUILD_WITH_TFM

endif # SOC_NRF5340_CPUAPP


config NRF_ENABLE_CACHE
	bool "Cache"
	depends on (SOC_NRF5340_CPUAPP && (!TRUSTED_EXECUTION_NONSECURE || BUILD_WITH_TFM)) \
			|| SOC_NRF5340_CPUNET
	default y
	help
	  Instruction and Data cache is available on nRF5340 CPUAPP
	  (Application MCU). It may only be accessed by Secure code.

	  Instruction cache only (I-Cache) is available in nRF5340
	  CPUNET (Network MCU).

config BUILD_WITH_TFM
	# TF-M nRF53 platform enables the cache unconditionally.
	select NRF_ENABLE_CACHE if SOC_NRF5340_CPUAPP

config NRF53_SYNC_RTC
	bool "RTC clock synchronization"
	default y if LOG && !LOG_MODE_MINIMAL
	depends on NRF_RTC_TIMER
	select NRFX_DPPI
	select MBOX if !IPM

if NRF53_SYNC_RTC

module = SYNC_RTC
module-str = Synchronized RTC
source "subsys/logging/Kconfig.template.log_config"

config NRF53_SYNC_RTC_INIT_PRIORITY
	int "nRF53 Synchronized RTC init priority"
	default APPLICATION_INIT_PRIORITY
	help
	  nRF53 Synchronized RTC initialization priority.

config NRF_RTC_TIMER_USER_CHAN_COUNT
	default 3 if NRF_802154_RADIO_DRIVER
	default 1

config NRF53_SYNC_RTC_LOG_TIMESTAMP
	bool "Use Synchronized RTC for logging timestamp"
	default y

config NRF53_SYNC_RTC_IPM_OUT
	int "IPM channel from APP to NET"
	range 0 15
	default 7 if SOC_NRF5340_CPUAPP
	default 8

config NRF53_SYNC_RTC_IPM_IN
	int "IPM channel from APP to NET"
	range 0 15
	default 8 if SOC_NRF5340_CPUAPP
	default 7

ipm_num = 0
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 1
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 2
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 3
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 4
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 5
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 6
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 7
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 8
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 9
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 10
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 11
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 12
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 13
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 14
rsource "Kconfig.sync_rtc_ipm"
ipm_num = 15
rsource "Kconfig.sync_rtc_ipm"

endif # NRF53_SYNC_RTC
endif # SOC_SERIES_NRF53X