/*
 * Copyright (c) 2021, Teslabs Engineering S.L.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv7-m.dtsi>
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/i2c/i2c.h>

#include <zephyr/dt-bindings/pwm/pwm.h>

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m4f";
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <1>;

			mpu: mpu@e000ed90 {
				compatible = "arm,armv7m-mpu";
				reg = <0xe000ed90 0x40>;
				arm,num-mpu-regions = <8>;
			};
		};
	};

	soc {
		sram0: memory@20000000 {
			compatible = "mmio-sram";
			reg = <0x20000000 DT_SIZE_K(112)>;
		};

		fmc: flash-controller@40023c00 {
			compatible = "gd,gd32-flash-controller";
			label = "FMC";
			reg = <0x40023c00 0x400>;

			#address-cells = <1>;
			#size-cells = <1>;

			flash0: flash@8000000 {
				compatible = "soc-nv-flash";
				label = "FLASH0";
			};
		};

		usart0: usart@40011000 {
			compatible = "gd,gd32-usart";
			reg = <0x40011000 0x400>;
			interrupts = <37 0>;
			rcu-periph-clock = <0x1104>;
			status = "disabled";
			label = "USART_0";
		};

		usart1: usart@40004400 {
			compatible = "gd,gd32-usart";
			reg = <0x40004400 0x400>;
			interrupts = <38 0>;
			rcu-periph-clock = <0x1011>;
			status = "disabled";
			label = "USART_1";
		};

		usart2: usart@40004800 {
			compatible = "gd,gd32-usart";
			reg = <0x40004800 0x400>;
			interrupts = <39 0>;
			rcu-periph-clock = <0x1012>;
			status = "disabled";
			label = "USART_2";
		};

		uart3: usart@40004c00 {
			compatible = "gd,gd32-usart";
			reg = <0x40004c00 0x400>;
			interrupts = <52 0>;
			rcu-periph-clock = <0x1013>;
			status = "disabled";
			label = "USART_3";
		};

		uart4: usart@40005000 {
			compatible = "gd,gd32-usart";
			reg = <0x40005000 0x400>;
			interrupts = <52 0>;
			rcu-periph-clock = <0x1014>;
			status = "disabled";
			label = "USART_4";
		};

		usart5: usart@40011400 {
			compatible = "gd,gd32-usart";
			reg = <0x40011400 0x400>;
			interrupts = <71 0>;
			rcu-periph-clock = <0x1105>;
			status = "disabled";
			label = "USART_5";
		};

		uart6: usart@40007800 {
			compatible = "gd,gd32-usart";
			reg = <0x40007800 0x400>;
			interrupts = <82 0>;
			rcu-periph-clock = <0x101e>;
			status = "disabled";
			label = "USART_6";
		};

		uart7: usart@40007c00 {
			compatible = "gd,gd32-usart";
			reg = <0x40007c00 0x400>;
			interrupts = <83 0>;
			rcu-periph-clock = <0x101f>;
			status = "disabled";
			label = "USART_7";
		};

		dac: dac@40007400 {
			compatible = "gd,gd32-dac";
			reg = <0x40007400 0x400>;
			rcu-periph-clock = <0x101d>;
			num-channels = <2>;
			label = "DAC";
			status = "disabled";
			#io-channel-cells = <1>;
		};

		i2c0: i2c@40005400 {
			compatible = "gd,gd32-i2c";
			reg = <0x40005400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;
			clock-frequency = <I2C_BITRATE_STANDARD>;
			interrupts = <31 0>, <32 0>;
			interrupt-names = "event", "error";
			rcu-periph-clock = <0x1015>;
			status = "disabled";
			label = "I2C_0";
		};

		i2c1: i2c@40005800 {
			compatible = "gd,gd32-i2c";
			reg = <0x40005800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;
			clock-frequency = <I2C_BITRATE_STANDARD>;
			interrupts = <33 0>, <34 0>;
			interrupt-names = "event", "error";
			rcu-periph-clock = <0x1016>;
			status = "disabled";
			label = "I2C_1";
		};

		i2c2: i2c@40005c00 {
			compatible = "gd,gd32-i2c";
			reg = <0x40005c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;
			clock-frequency = <I2C_BITRATE_STANDARD>;
			interrupts = <72 0>, <73 0>;
			interrupt-names = "event", "error";
			rcu-periph-clock = <0x1017>;
			status = "disabled";
			label = "I2C_2";
		};

		spi0: spi@40013000 {
			compatible = "gd,gd32-spi";
			reg = <0x40013000 0x400>;
			interrupts = <35 0>;
			rcu-periph-clock = <0x110c>;
			status = "disabled";
			label = "SPI_0";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		spi1: spi@40003800 {
			compatible = "gd,gd32-spi";
			reg = <0x40003800 0x400>;
			interrupts = <36 0>;
			rcu-periph-clock = <0x100e>;
			status = "disabled";
			label = "SPI_1";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		spi2: spi@40003c00 {
			compatible = "gd,gd32-spi";
			reg = <0x40003c00 0x400>;
			interrupts = <51 0>;
			rcu-periph-clock = <0x100f>;
			status = "disabled";
			label = "SPI_2";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		adc0: adc@40012000 {
			compatible = "gd,gd32-adc";
			reg = <0x40012000 0x100>;
			interrupts = <18 0>;
			rcu-periph-clock = <0x1108>;
			channels = <16>;
			status = "disabled";
			label = "ADC_0";
			#io-channel-cells = <1>;
		};

		adc1: adc@40012100 {
			compatible = "gd,gd32-adc";
			reg = <0x40012100 0x100>;
			interrupts = <18 0>;
			rcu-periph-clock = <0x1109>;
			channels = <16>;
			status = "disabled";
			label = "ADC_1";
			#io-channel-cells = <1>;
		};

		adc2: adc@40012200 {
			compatible = "gd,gd32-adc";
			reg = <0x40012200 0x100>;
			interrupts = <18 0>;
			rcu-periph-clock = <0x110A>;
			channels = <16>;
			status = "disabled";
			label = "ADC_2";
			#io-channel-cells = <1>;
		};

		syscfg: syscfg@40013800 {
			compatible = "gd,gd32-syscfg";
			reg = <0x40013800 0x400>;
			rcu-periph-clock = <0x110e>;
			label = "SYSCFG";
		};

		exti: interrupt-controller@40013c00 {
			compatible = "gd,gd32-exti";
			interrupt-controller;
			#interrupt-cells = <1>;
			reg = <0x40013c00 0x400>;
			num-lines = <23>;
			interrupts = <6 0>, <7 0>, <8 0>, <9 0>, <10 0>, <23 0>,
				     <40 0>;
			interrupt-names = "line0", "line1", "line2", "line3",
					  "line4", "line5-9", "line10-15";
			status = "okay";
			label = "EXTI";
		};

		pinctrl: pin-controller@40020000 {
			compatible = "gd,gd32-pinctrl-af";
			reg = <0x40020000 0x2400>;
			#address-cells = <1>;
			#size-cells = <1>;
			status = "okay";
			label = "PINCTRL";

			gpioa: gpio@40020000 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40020000 0x400>;
				rcu-periph-clock = <0xc00>;
				status = "disabled";
				label = "GPIOA";
			};

			gpiob: gpio@40020400 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40020400 0x400>;
				rcu-periph-clock = <0xc01>;
				status = "disabled";
				label = "GPIOB";
			};

			gpioc: gpio@40020800 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40020800 0x400>;
				rcu-periph-clock = <0xc02>;
				status = "disabled";
				label = "GPIOC";
			};

			gpiod: gpio@40020c00 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40020c00 0x400>;
				rcu-periph-clock = <0xc03>;
				status = "disabled";
				label = "GPIOD";
			};

			gpioe: gpio@40021000 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40021000 0x400>;
				rcu-periph-clock = <0xc04>;
				status = "disabled";
				label = "GPIOE";
			};

			gpiof: gpio@40021400 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40021400 0x400>;
				rcu-periph-clock = <0xc05>;
				status = "disabled";
				label = "GPIOF";
			};

			gpiog: gpio@40021800 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40021800 0x400>;
				rcu-periph-clock = <0xc06>;
				status = "disabled";
				label = "GPIOG";
			};

			gpioh: gpio@40021c00 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40021c00 0x400>;
				rcu-periph-clock = <0xc07>;
				status = "disabled";
				label = "GPIOH";
			};

			gpioi: gpio@40022000 {
				compatible = "gd,gd32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x40022000 0x400>;
				rcu-periph-clock = <0xc08>;
				status = "disabled";
				label = "GPIOI";
			};
		};

		timer0: timer@40010000 {
			compatible = "gd,gd32-timer";
			reg = <0x40010000 0x400>;
			interrupts = <24 0>, <25 0>, <26 0>, <27 0>;
			interrupt-names = "brk", "up", "trgcom", "cc";
			rcu-periph-clock = <0x1100>;
			rcu-periph-reset = <0x900>;
			is-advanced;
			channels = <4>;
			status = "disabled";
			label = "TIMER_0";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_0";
				#pwm-cells = <3>;
			};
		};

		timer1: timer@40000000 {
			compatible = "gd,gd32-timer";
			reg = <0x40000000 0x400>;
			interrupts = <28 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1000>;
			rcu-periph-reset = <0x800>;
			is-32bit;
			channels = <4>;
			status = "disabled";
			label = "TIMER_1";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_1";
				#pwm-cells = <3>;
			};
		};

		timer2: timer@40000400 {
			compatible = "gd,gd32-timer";
			reg = <0x40000400 0x400>;
			interrupts = <29 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1001>;
			rcu-periph-reset = <0x801>;
			channels = <4>;
			status = "disabled";
			label = "TIMER_2";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_2";
				#pwm-cells = <3>;
			};
		};

		timer3: timer@40000800 {
			compatible = "gd,gd32-timer";
			reg = <0x40000800 0x400>;
			interrupts = <30 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1002>;
			rcu-periph-reset = <0x802>;
			channels = <4>;
			status = "disabled";
			label = "TIMER_3";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_3";
				#pwm-cells = <3>;
			};
		};

		timer4: timer@40000c00 {
			compatible = "gd,gd32-timer";
			reg = <0x40000c00 0x400>;
			interrupts = <50 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1003>;
			rcu-periph-reset = <0x803>;
			is-32bit;
			channels = <4>;
			status = "disabled";
			label = "TIMER_4";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_4";
				#pwm-cells = <3>;
			};
		};

		timer5: timer@40001000 {
			compatible = "gd,gd32-timer";
			reg = <0x40001000 0x400>;
			interrupts = <54 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1004>;
			rcu-periph-reset = <0x804>;
			channels = <0>;
			status = "disabled";
			label = "TIMER_5";
		};

		timer6: timer@40001400 {
			compatible = "gd,gd32-timer";
			reg = <0x40001400 0x400>;
			interrupts = <55 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1005>;
			rcu-periph-reset = <0x805>;
			channels = <0>;
			status = "disabled";
			label = "TIMER_6";
		};

		timer7: timer@40010400 {
			compatible = "gd,gd32-timer";
			reg = <0x40010400 0x400>;
			interrupts = <43 0>, <44 0>, <45 0>, <46 0>;
			interrupt-names = "brk", "up", "trgcom", "cc";
			rcu-periph-clock = <0x1101>;
			rcu-periph-reset = <0x901>;
			is-advanced;
			channels = <4>;
			status = "disabled";
			label = "TIMER_7";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_7";
				#pwm-cells = <3>;
			};
		};

		timer8: timer@40014000 {
			compatible = "gd,gd32-timer";
			reg = <0x40014000 0x400>;
			interrupts = <24 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1110>;
			rcu-periph-reset = <0x910>;
			channels = <2>;
			status = "disabled";
			label = "TIMER_8";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_8";
				#pwm-cells = <3>;
			};
		};

		timer9: timer@40014400 {
			compatible = "gd,gd32-timer";
			reg = <0x40014400 0x400>;
			interrupts = <25 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1111>;
			rcu-periph-reset = <0x911>;
			channels = <1>;
			status = "disabled";
			label = "TIMER_9";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_9";
				#pwm-cells = <3>;
			};
		};

		timer10: timer@40014800 {
			compatible = "gd,gd32-timer";
			reg = <0x40014800 0x400>;
			interrupts = <26 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1112>;
			rcu-periph-reset = <0x912>;
			channels = <1>;
			status = "disabled";
			label = "TIMER_10";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_10";
				#pwm-cells = <3>;
			};
		};

		timer11: timer@40001800 {
			compatible = "gd,gd32-timer";
			reg = <0x40001800 0x400>;
			interrupts = <43 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1006>;
			rcu-periph-reset = <0x806>;
			channels = <2>;
			status = "disabled";
			label = "TIMER_11";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_11";
				#pwm-cells = <3>;
			};
		};

		timer12: timer@40001c00 {
			compatible = "gd,gd32-timer";
			reg = <0x40001c00 0x400>;
			interrupts = <44 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1007>;
			rcu-periph-reset = <0x802>;
			channels = <1>;
			status = "disabled";
			label = "TIMER_12";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_12";
				#pwm-cells = <3>;
			};
		};

		timer13: timer@40002000 {
			compatible = "gd,gd32-timer";
			reg = <0x40002000 0x400>;
			interrupts = <45 0>;
			interrupt-names = "global";
			rcu-periph-clock = <0x1008>;
			rcu-periph-reset = <0x808>;
			channels = <1>;
			status = "disabled";
			label = "TIMER_13";

			pwm {
				compatible = "gd,gd32-pwm";
				status = "disabled";
				label = "PWM_13";
				#pwm-cells = <3>;
			};
		};
	};
};

&nvic {
	arm,num-irq-priority-bits = <4>;
};