/*
 * Copyright (c) 2017 Christian Taedcke
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <silabs/efm32hg322f64.dtsi>
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "Silicon Labs EFM32HG SLSTK3400A board";
	compatible = "silabs,efm32hg_slstk3400a", "silabs,efm32hg";

	chosen {
		zephyr,console = &usart1;
		zephyr,shell-uart = &usart1;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		led0 = &led0;
		led1 = &led1;
		sw0 = &button0;
		sw1 = &button1;
	};

	leds {
		compatible = "gpio-leds";
		led0: led_0 {
			gpios = <&gpiof 4 0>;
			label = "LED 0";
		};
		led1: led_1 {
			gpios = <&gpiof 5 0>;
			label = "LED 1";
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			/* gpio flags need validation */
			gpios = <&gpioc 9 GPIO_ACTIVE_LOW>;
			label = "User Push Button 0";
			zephyr,code = <INPUT_KEY_0>;
		};
		button1: button_1 {
			/* gpio flags need validation */
			gpios = <&gpioc 10 GPIO_ACTIVE_LOW>;
			label = "User Push Button 1";
			zephyr,code = <INPUT_KEY_1>;
		};
	};

};

&cpu0 {
	clock-frequency = <24000000>;
};

&gpioa {
	status = "okay";

	board-controller-enable {
		gpio-hog;
		gpios = <9 GPIO_ACTIVE_HIGH>;
		output-high;
	};
};

&gpioc {
	status = "okay";
};

&gpiof {
	status = "okay";
};

&usart1 {
	current-speed = <115200>;
	location-rx = <GECKO_LOCATION(4) GECKO_PORT_A GECKO_PIN(0)>;
	location-tx = <GECKO_LOCATION(4) GECKO_PORT_F GECKO_PIN(2)>;
	status = "okay";
};

&flash0 {

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		/* Set 4Kb of storage at the end of the 64Kb of flash */
		storage_partition: partition@f000 {
			label = "storage";
			reg = <0x0000f000 0x00001000>;
		};

	};
};