#
#  Copyright (c) 2023 Andes Technology Corporation.
#
#  SPDX-License-Identifier: Apache-2.0

compatible: "andestech,atcdmac300"

include: dma-controller.yaml

properties:
  reg:
    required: true

  interrupts:
    required: true

  chain-transfer:
    type: int

  "#dma-cells":
    const: 3

dma-cells:
  - channel
  - slot
  - channel-config

description: |
  Andes DMA controller
  channel: a phandle to the DMA controller plus the following four integer cells:
    1. channel: the dma channel
    2. slot: DMA peripherial request ID
    3. channel-config: A 32bit mask specifying the DMA channel configuration
    which is device dependent:
        -bit 0-1 : Direction  (see dma.h)
               0x0: MEM to MEM
               0x1: MEM to PERIPH
               0x2: PERIPH to MEM
               0x3: reserved for PERIPH to PERIPH
        -bit 2 : Peripheral Increment Address
               0x0: no address increment between transfers
               0x1: increment address between transfers
        -bit 3 : Memory Increment Address
               0x0: no address increment between transfers
               0x1: increment address between transfers
        -bit 4-6 : Peripheral data size
               0x0: Byte (8 bits)
               0x1: Half-word (16 bits)
               0x2: Word (32 bits)
               0x3: Double word (64 bits)
               0x4: Quad word (128 bits)
               0x5: Eight word (256 bits)
               0x6-0x7: reserved
        -bit 7-9 : Memory data size
               0x0: Byte (8 bits)
               0x1: Half-word (16 bits)
               0x2: Word (32 bits)
               0x3: Double word (64 bits)
               0x4: Quad word (128 bits)
               0x5: Eight word (256 bits)
               0x6-0x7: reserved
        -bit 10 : Priority level
               0x0: lower priority
               0x1: higher priority

    examples for andes_v5_ae350 DMA instance
     dma0: dma0@f0c00000 {
         compatible = "andestech,atcdmac300";
         ...
         dma-channels = <8>;
         dma-requests = <16>;
         status = "disabled";
         label = "DMA_0";
        };

  For the client part, example for andes_ae350 DMA instance
    Tx using channel 2, slot 0
    Rx using channel 3, slot 1
    spi1: spi@f0f00000 {
     compatible = "andestech,atcspi200"
     dmas = <&dma0 2 0 0x0129>,
            <&dma0 3 1 0x012A>;
     dma-names = "tx", "rx";
     };