blob: 0c7f525ec0c20c4195dc478fc2f2e3bdb7282c12 [file] [log] [blame] [edit]
/*
* Copyright 2021 Google LLC
* Copyright 2022 TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT raspberrypi_pico_adc
#include <zephyr/drivers/adc.h>
#include <zephyr/logging/log.h>
#include <hardware/adc.h>
#include <zephyr/irq.h>
LOG_MODULE_REGISTER(adc_rpi, CONFIG_ADC_LOG_LEVEL);
#define ADC_CONTEXT_USES_KERNEL_TIMER
#include "adc_context.h"
#define ADC_RPI_MAX_RESOLUTION 12
/** Bits numbers of rrobin register mean an available number of channels. */
#define ADC_RPI_CHANNEL_NUM (ADC_CS_RROBIN_MSB - ADC_CS_RROBIN_LSB + 1)
/**
* @brief RaspberryPi Pico ADC config
*
* This structure contains constant data for given instance of RaspberryPi Pico ADC.
*/
struct adc_rpi_config {
/** Number of supported channels */
uint8_t num_channels;
/** function pointer to irq setup */
void (*irq_configure)(void);
};
/**
* @brief RaspberryPi Pico ADC data
*
* This structure contains data structures used by a RaspberryPi Pico ADC.
*/
struct adc_rpi_data {
/** Structure that handle state of ongoing read operation */
struct adc_context ctx;
/** Pointer to RaspberryPi Pico ADC own device structure */
const struct device *dev;
/** Pointer to memory where next sample will be written */
uint16_t *buf;
/** Pointer to where will be data stored in case of repeated sampling */
uint16_t *repeat_buf;
/** Mask with channels that will be sampled */
uint32_t channels;
};
static inline void adc_start_once(void)
{
hw_set_bits(&adc_hw->cs, ADC_CS_START_ONCE_BITS);
}
static inline uint16_t adc_get_result(void)
{
return (uint16_t)adc_hw->result;
}
static inline bool adc_get_err(void)
{
return (adc_hw->cs & ADC_CS_ERR_BITS) ? true : false;
}
static inline void adc_clear_errors(void)
{
/* write 1 to clear */
hw_set_bits(&adc_hw->fcs, ADC_FCS_OVER_BITS);
hw_set_bits(&adc_hw->fcs, ADC_FCS_UNDER_BITS);
hw_set_bits(&adc_hw->fcs, ADC_FCS_ERR_BITS);
hw_set_bits(&adc_hw->cs, ADC_CS_ERR_STICKY_BITS);
}
static inline void adc_enable(void)
{
adc_hw->cs = ADC_CS_EN_BITS;
while (!(adc_hw->cs & ADC_CS_READY_BITS))
;
}
static int adc_rpi_channel_setup(const struct device *dev,
const struct adc_channel_cfg *channel_cfg)
{
const struct adc_rpi_config *config = dev->config;
if (channel_cfg->channel_id >= config->num_channels) {
LOG_ERR("unsupported channel id '%d'", channel_cfg->channel_id);
return -ENOTSUP;
}
if (channel_cfg->acquisition_time != ADC_ACQ_TIME_DEFAULT) {
LOG_ERR("Acquisition time is not valid");
return -EINVAL;
}
if (channel_cfg->differential) {
LOG_ERR("unsupported differential mode");
return -ENOTSUP;
}
if (channel_cfg->gain != ADC_GAIN_1) {
LOG_ERR("Gain is not valid");
return -EINVAL;
}
return 0;
}
/**
* @brief Check if buffer in @p sequence is big enough to hold all ADC samples
*
* @param dev RaspberryPi Pico ADC device
* @param sequence ADC sequence description
*
* @return 0 on success
* @return -ENOMEM if buffer is not big enough
*/
static int adc_rpi_check_buffer_size(const struct device *dev,
const struct adc_sequence *sequence)
{
const struct adc_rpi_config *config = dev->config;
uint8_t channels = 0;
size_t needed;
uint32_t mask;
for (mask = BIT(config->num_channels - 1); mask != 0; mask >>= 1) {
if (mask & sequence->channels) {
channels++;
}
}
needed = channels * sizeof(uint16_t);
if (sequence->options) {
needed *= (1 + sequence->options->extra_samplings);
}
if (sequence->buffer_size < needed) {
return -ENOMEM;
}
return 0;
}
/**
* @brief Start processing read request
*
* @param dev RaspberryPi Pico ADC device
* @param sequence ADC sequence description
*
* @return 0 on success
* @return -ENOTSUP if requested resolution or channel is out side of supported
* range
* @return -ENOMEM if buffer is not big enough
* (see @ref adc_rpi_check_buffer_size)
* @return other error code returned by adc_context_wait_for_completion
*/
static int adc_rpi_start_read(const struct device *dev,
const struct adc_sequence *sequence)
{
const struct adc_rpi_config *config = dev->config;
struct adc_rpi_data *data = dev->data;
int err;
if (sequence->resolution > ADC_RPI_MAX_RESOLUTION ||
sequence->resolution == 0) {
LOG_ERR("unsupported resolution %d", sequence->resolution);
return -ENOTSUP;
}
if (find_msb_set(sequence->channels) > config->num_channels) {
LOG_ERR("unsupported channels in mask: 0x%08x",
sequence->channels);
return -ENOTSUP;
}
err = adc_rpi_check_buffer_size(dev, sequence);
if (err) {
LOG_ERR("buffer size too small");
return err;
}
data->buf = sequence->buffer;
adc_context_start_read(&data->ctx, sequence);
return adc_context_wait_for_completion(&data->ctx);
}
/**
* Interrupt handler
*/
static void adc_rpi_isr(const struct device *dev)
{
struct adc_rpi_data *data = dev->data;
uint16_t result;
uint8_t ainsel;
/* Fetch result */
result = adc_get_result();
ainsel = adc_get_selected_input();
/* Drain FIFO */
while (!adc_fifo_is_empty()) {
(void)adc_fifo_get();
}
/* Abort converting if error detected. */
if (adc_get_err()) {
adc_context_complete(&data->ctx, -EIO);
return;
}
/* Copy to buffer and mark this channel as completed to channels bitmap. */
*data->buf++ = result;
data->channels &= ~(BIT(ainsel));
/* Notify result if all data gathered. */
if (data->channels == 0) {
adc_context_on_sampling_done(&data->ctx, dev);
return;
}
/* Kick next channel conversion */
ainsel = (uint8_t)(find_lsb_set(data->channels) - 1);
adc_select_input(ainsel);
adc_start_once();
}
static int adc_rpi_read_async(const struct device *dev,
const struct adc_sequence *sequence,
struct k_poll_signal *async)
{
struct adc_rpi_data *data = dev->data;
int err;
adc_context_lock(&data->ctx, async ? true : false, async);
err = adc_rpi_start_read(dev, sequence);
adc_context_release(&data->ctx, err);
return err;
}
static int adc_rpi_read(const struct device *dev,
const struct adc_sequence *sequence)
{
return adc_rpi_read_async(dev, sequence, NULL);
}
static void adc_context_start_sampling(struct adc_context *ctx)
{
struct adc_rpi_data *data = CONTAINER_OF(ctx, struct adc_rpi_data,
ctx);
data->channels = ctx->sequence.channels;
data->repeat_buf = data->buf;
adc_clear_errors();
/* Find next channel and start conversion */
adc_select_input(find_lsb_set(data->channels) - 1);
adc_start_once();
}
static void adc_context_update_buffer_pointer(struct adc_context *ctx,
bool repeat_sampling)
{
struct adc_rpi_data *data = CONTAINER_OF(ctx, struct adc_rpi_data,
ctx);
if (repeat_sampling) {
data->buf = data->repeat_buf;
}
}
/**
* @brief Function called on init for each RaspberryPi Pico ADC device. It setups all
* channels to return constant 0 mV and create acquisition thread.
*
* @param dev RaspberryPi Pico ADC device
*
* @return 0 on success
*/
static int adc_rpi_init(const struct device *dev)
{
const struct adc_rpi_config *config = dev->config;
struct adc_rpi_data *data = dev->data;
config->irq_configure();
/*
* Configure the FIFO control register.
* Set the threshold as 1 for getting notification immediately
* on converting completed.
*/
adc_fifo_setup(true, false, 1, true, true);
/* Set max speed to conversion */
adc_set_clkdiv(0.f);
/* Enable ADC and wait becoming READY */
adc_enable();
/* Enable FIFO interrupt */
adc_irq_set_enabled(true);
adc_context_unlock_unconditionally(&data->ctx);
return 0;
}
#define IRQ_CONFIGURE_FUNC(idx) \
static void adc_rpi_configure_func_##idx(void) \
{ \
IRQ_CONNECT(DT_INST_IRQN(idx), DT_INST_IRQ(idx, priority), \
adc_rpi_isr, DEVICE_DT_INST_GET(idx), 0); \
irq_enable(DT_INST_IRQN(idx)); \
}
#define IRQ_CONFIGURE_DEFINE(idx) .irq_configure = adc_rpi_configure_func_##idx
#define ADC_RPI_INIT(idx) \
IRQ_CONFIGURE_FUNC(idx) \
static struct adc_driver_api adc_rpi_api_##idx = { \
.channel_setup = adc_rpi_channel_setup, \
.read = adc_rpi_read, \
.ref_internal = DT_INST_PROP(idx, vref_mv), \
IF_ENABLED(CONFIG_ADC_ASYNC, (.read_async = adc_rpi_read_async,)) \
}; \
static const struct adc_rpi_config adc_rpi_config_##idx = { \
.num_channels = ADC_RPI_CHANNEL_NUM, \
IRQ_CONFIGURE_DEFINE(idx), \
}; \
static struct adc_rpi_data adc_rpi_data_##idx = { \
ADC_CONTEXT_INIT_TIMER(adc_rpi_data_##idx, ctx), \
ADC_CONTEXT_INIT_LOCK(adc_rpi_data_##idx, ctx), \
ADC_CONTEXT_INIT_SYNC(adc_rpi_data_##idx, ctx), \
.dev = DEVICE_DT_INST_GET(idx), \
}; \
\
DEVICE_DT_INST_DEFINE(idx, adc_rpi_init, NULL, \
&adc_rpi_data_##idx, \
&adc_rpi_config_##idx, POST_KERNEL, \
CONFIG_ADC_INIT_PRIORITY, \
&adc_rpi_api_##idx)
DT_INST_FOREACH_STATUS_OKAY(ADC_RPI_INIT);