blob: b110f91cfb0f270df912cc22c8f625c905747e8e [file] [log] [blame] [edit]
# Microchip XEC ESPI configuration options
# Copyright (c) 2019 Intel Corporation
# SPDX-License-Identifier: Apache-2.0
config ESPI_XEC
bool "XEC Microchip ESPI driver"
default y
depends on DT_HAS_MICROCHIP_XEC_ESPI_ENABLED
help
Enable the Microchip XEC ESPI driver for MEC15xx family.
config ESPI_XEC_V2
bool "XEC Microchip ESPI V2 driver"
default y
depends on DT_HAS_MICROCHIP_XEC_ESPI_V2_ENABLED
help
Enable the Microchip XEC ESPI driver for MEC172x series.
if ESPI_XEC || ESPI_XEC_V2
config ESPI_OOB_CHANNEL
default y
config ESPI_FLASH_CHANNEL
default y
config ESPI_PERIPHERAL_HOST_IO
default y
config ESPI_PERIPHERAL_HOST_IO_PVT
default y
config ESPI_PERIPHERAL_DEBUG_PORT_80
default y
config ESPI_PERIPHERAL_UART
default y
config ESPI_PERIPHERAL_UART_SOC_MAPPING
int "SoC port exposed as logical eSPI UART"
default 2 if SOC_SERIES_MEC1501X
default 1 if SOC_SERIES_MEC172X
depends on ESPI_PERIPHERAL_UART
help
This tells the driver to which SoC UART to direct the UART traffic
send over eSPI from host.
config ESPI_OOB_BUFFER_SIZE
int "eSPI OOB channel buffer size in bytes"
default 128
depends on ESPI_OOB_CHANNEL
help
Use minimum RAM buffer size by default but allow applications to
override the value.
Maximum OOB payload is 73 bytes.
config ESPI_FLASH_BUFFER_SIZE
int "eSPI Flash channel buffer size in bytes"
default 256
depends on ESPI_FLASH_CHANNEL
help
Use maximum RAM buffer size defined by spec but allow applications
to override if eSPI host doesn't support it.
config ESPI_SAF_XEC
bool "XEC Microchip ESPI SAF driver"
default y
depends on SOC_SERIES_MEC1501X
depends on DT_HAS_MICROCHIP_XEC_ESPI_SAF_ENABLED
help
Enable the Microchip XEC SAF ESPI driver for MEC15xx family.
config ESPI_SAF_XEC_V2
bool "XEC Microchip ESPI SAF V2 driver"
default y
depends on SOC_SERIES_MEC172X
depends on DT_HAS_MICROCHIP_XEC_ESPI_SAF_V2_ENABLED
help
Enable the Microchip XEC SAF ESPI driver for MEC172x series.
endif #ESPI_XEC
if ESPI_XEC_V2
config ESPI_XEC_PERIPHERAL_ACPI_SHD_MEM_SIZE
int "Host I/O peripheral port size for shared memory in MEC172X series"
depends on ESPI_XEC_V2 || ESPI_PERIPHERAL_ACPI_SHM_REGION
default 256
help
This is the port size used by the Host and EC to communicate over
the shared memory region to return the ACPI response data.
config ESPI_XEC_PERIPHERAL_HOST_CMD_PARAM_SIZE
int "Host I/O peripheral port size for ec host command in MEC172X series"
depends on ESPI_XEC_V2 || ESPI_PERIPHERAL_EC_HOST_CMD
default 256
help
This is the port size used by the Host and EC to communicate over
the shared memory region to return the host command parameter data.
config ESPI_PERIPHERAL_8042_KBC
default y
if ESPI_PERIPHERAL_CHANNEL
config ESPI_PERIPHERAL_XEC_MAILBOX
bool "SoC Mailbox over eSPI"
help
Enable a 32 byte mailbox interface accessible via Host I/O over the
ESPI Peripheral Channel.
config ESPI_PERIPHERAL_XEC_ACPI_EC2
bool "SoC ACPI EC 2 over eSPI"
help
Enable ACPI EC2 interface accessible via Host I/O over the
ESPI Peripheral Channel.
config ESPI_PERIPHERAL_XEC_ACPI_EC3
bool "SoC ACPI EC 3 over eSPI"
help
Enable ACPI EC3 interface accessible via Host I/O over the
ESPI Peripheral Channel.
config ESPI_PERIPHERAL_XEC_ACPI_EC4
bool "SoC ACPI EC 4 over eSPI"
help
Enable ACPI EC4 interface accessible via Host I/O over the
ESPI Peripheral Channel.
config ESPI_PERIPHERAL_XEC_ACPI_PM1
bool "SoC ACPI PM1 over eSPI"
help
Enable ACPI PM1 interface accessible via Host I/O over the
ESPI Peripheral Channel.
config ESPI_PERIPHERAL_XEC_EMI0
bool "SoC EMI 0 over eSPI"
help
Enable EMI 0 interface accessible via Host I/O over the
ESPI Peripheral Channel.
config ESPI_PERIPHERAL_XEC_EMI1
bool "SoC EMI 1 over eSPI"
help
Enable EMI 1 interface accessible via Host I/O over the
ESPI Peripheral Channel.
config ESPI_PERIPHERAL_XEC_EMI2
bool "SoC EMI 2 over eSPI"
help
Enable EMI 2 interface accessible via Host I/O over the
ESPI Peripheral Channel.
endif #ESPI_PERIPHERAL_CHANNEL
config ESPI_SAF
bool "XEC Microchip ESPI SAF driver"
depends on ESPI_FLASH_CHANNEL
help
Enable Slave Attached Flash eSPI driver. SAF depends upon ESPI XEC driver
and flash channel.
config ESPI_SAF_INIT_PRIORITY
int "ESPI SAF driver initialization priority"
depends on ESPI_SAF
default 4
help
Driver initialization priority for eSPI SAF driver.
config ESPI_PERIPHERAL_ACPI_EC_IBF_EVT_DATA
bool "Read ACPI EC Event Data in IBF ISR"
depends on ESPI_PERIPHERAL_CHANNEL
help
Enable reading event data in ACPI EC IBF ISR. This is used in OS
environment where application expects IBF ISR to read data and pass
to callback.
endif #ESPI_XEC_V2
if ESPI_XEC_V2 && ESPI_PERIPHERAL_8042_KBC
config ESPI_PERIPHERAL_KBC_IBF_EVT_DATA
bool "KBC event data format in IBF"
help
Enable espi_evt_data_kbc format for encoding event in KBC IBF ISR
config ESPI_PERIPHERAL_KBC_OBE_CBK
bool "KBC OBE Callback"
help
Enable KBC OBE callback from OBE ISR
endif #ESPI_XEC_V2 && ESPI_PERIPHERAL_8042_KBC