blob: 0ec98f2c55dd68105d3770263c26a88f01b556db [file] [log] [blame] [edit]
/*
* Copyright (c) 2018-2019 Intel Corporation.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT intel_e1000
#define LOG_MODULE_NAME eth_e1000
#define LOG_LEVEL CONFIG_ETHERNET_LOG_LEVEL
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(LOG_MODULE_NAME);
#include <sys/types.h>
#include <zephyr/kernel.h>
#include <zephyr/net/ethernet.h>
#include <ethernet/eth_stats.h>
#include <zephyr/drivers/pcie/pcie.h>
#include <zephyr/irq.h>
#include "eth_e1000_priv.h"
#if defined(CONFIG_ETH_E1000_PTP_CLOCK)
#include <zephyr/drivers/ptp_clock.h>
#define PTP_INST_NODEID(n) DT_INST_CHILD(n, ptp)
#endif
#if defined(CONFIG_ETH_E1000_VERBOSE_DEBUG)
#define hexdump(_buf, _len, fmt, args...) \
({ \
const size_t STR_SIZE = 80; \
char _str[STR_SIZE]; \
\
snprintk(_str, STR_SIZE, "%s: " fmt, __func__, ## args); \
\
LOG_HEXDUMP_DBG(_buf, _len, _str); \
})
#else
#define hexdump(args...)
#endif
static const char *e1000_reg_to_string(enum e1000_reg_t r)
{
#define _(_x) case _x: return #_x
switch (r) {
_(CTRL);
_(ICR);
_(ICS);
_(IMS);
_(RCTL);
_(TCTL);
_(RDBAL);
_(RDBAH);
_(RDLEN);
_(RDH);
_(RDT);
_(TDBAL);
_(TDBAH);
_(TDLEN);
_(TDH);
_(TDT);
_(RAL);
_(RAH);
}
#undef _
LOG_ERR("Unsupported register: 0x%x", r);
k_oops();
return NULL;
}
static struct net_if *get_iface(struct e1000_dev *ctx, uint16_t vlan_tag)
{
#if defined(CONFIG_NET_VLAN)
struct net_if *iface;
iface = net_eth_get_vlan_iface(ctx->iface, vlan_tag);
if (!iface) {
return ctx->iface;
}
return iface;
#else
ARG_UNUSED(vlan_tag);
return ctx->iface;
#endif
}
static enum ethernet_hw_caps e1000_caps(const struct device *dev)
{
return
#if defined(CONFIG_NET_VLAN)
ETHERNET_HW_VLAN |
#endif
#if defined(CONFIG_ETH_E1000_PTP_CLOCK)
ETHERNET_PTP |
#endif
ETHERNET_LINK_10BASE_T | ETHERNET_LINK_100BASE_T |
ETHERNET_LINK_1000BASE_T |
/* The driver does not really support TXTIME atm but mark
* it to support it so that we can test the txtime sample.
*/
ETHERNET_TXTIME;
}
#if defined(CONFIG_ETH_E1000_PTP_CLOCK)
static const struct device *e1000_get_ptp_clock(const struct device *dev)
{
struct e1000_dev *ctx = dev->data;
return ctx->ptp_clock;
}
#endif
static int e1000_tx(struct e1000_dev *dev, void *buf, size_t len)
{
hexdump(buf, len, "%zu byte(s)", len);
dev->tx.addr = POINTER_TO_INT(buf);
dev->tx.len = len;
dev->tx.cmd = TDESC_EOP | TDESC_RS;
iow32(dev, TDT, 1);
while (!(dev->tx.sta)) {
k_yield();
}
LOG_DBG("tx.sta: 0x%02hx", dev->tx.sta);
return (dev->tx.sta & TDESC_STA_DD) ? 0 : -EIO;
}
static int e1000_send(const struct device *ddev, struct net_pkt *pkt)
{
struct e1000_dev *dev = ddev->data;
size_t len = net_pkt_get_len(pkt);
if (net_pkt_read(pkt, dev->txb, len)) {
return -EIO;
}
return e1000_tx(dev, dev->txb, len);
}
static struct net_pkt *e1000_rx(struct e1000_dev *dev)
{
struct net_pkt *pkt = NULL;
void *buf;
ssize_t len;
LOG_DBG("rx.sta: 0x%02hx", dev->rx.sta);
if (!(dev->rx.sta & RDESC_STA_DD)) {
LOG_ERR("RX descriptor not ready");
goto out;
}
buf = INT_TO_POINTER((uint32_t)dev->rx.addr);
len = dev->rx.len - 4;
if (len <= 0) {
LOG_ERR("Invalid RX descriptor length: %hu", dev->rx.len);
goto out;
}
hexdump(buf, len, "%zd byte(s)", len);
pkt = net_pkt_rx_alloc_with_buffer(dev->iface, len, AF_UNSPEC, 0,
K_NO_WAIT);
if (!pkt) {
LOG_ERR("Out of buffers");
goto out;
}
if (net_pkt_write(pkt, buf, len)) {
LOG_ERR("Out of memory for received frame");
net_pkt_unref(pkt);
pkt = NULL;
}
out:
return pkt;
}
static void e1000_isr(const struct device *ddev)
{
struct e1000_dev *dev = ddev->data;
uint32_t icr = ior32(dev, ICR); /* Cleared upon read */
uint16_t vlan_tag = NET_VLAN_TAG_UNSPEC;
icr &= ~(ICR_TXDW | ICR_TXQE);
if (icr & ICR_RXO) {
struct net_pkt *pkt = e1000_rx(dev);
icr &= ~ICR_RXO;
if (pkt) {
#if defined(CONFIG_NET_VLAN)
struct net_eth_hdr *hdr = NET_ETH_HDR(pkt);
if (ntohs(hdr->type) == NET_ETH_PTYPE_VLAN) {
struct net_eth_vlan_hdr *hdr_vlan =
(struct net_eth_vlan_hdr *)
NET_ETH_HDR(pkt);
net_pkt_set_vlan_tci(
pkt, ntohs(hdr_vlan->vlan.tci));
vlan_tag = net_pkt_vlan_tag(pkt);
#if CONFIG_NET_TC_RX_COUNT > 1
enum net_priority prio;
prio = net_vlan2priority(
net_pkt_vlan_priority(pkt));
net_pkt_set_priority(pkt, prio);
#endif
}
#endif /* CONFIG_NET_VLAN */
net_recv_data(get_iface(dev, vlan_tag), pkt);
} else {
eth_stats_update_errors_rx(get_iface(dev, vlan_tag));
}
}
if (icr) {
LOG_ERR("Unhandled interrupt, ICR: 0x%x", icr);
}
}
int e1000_probe(const struct device *ddev)
{
/* PCI ID is decoded into REG_SIZE */
struct e1000_dev *dev = ddev->data;
uint32_t ral, rah;
struct pcie_bar mbar;
if (dev->pcie->bdf == PCIE_BDF_NONE) {
return -ENODEV;
}
pcie_probe_mbar(dev->pcie->bdf, 0, &mbar);
pcie_set_cmd(dev->pcie->bdf, PCIE_CONF_CMDSTAT_MEM |
PCIE_CONF_CMDSTAT_MASTER, true);
device_map(&dev->address, mbar.phys_addr, mbar.size,
K_MEM_CACHE_NONE);
/* Setup TX descriptor */
iow32(dev, TDBAL, (uint32_t)POINTER_TO_UINT(&dev->tx));
iow32(dev, TDBAH, (uint32_t)((POINTER_TO_UINT(&dev->tx) >> 16) >> 16));
iow32(dev, TDLEN, 1*16);
iow32(dev, TDH, 0);
iow32(dev, TDT, 0);
iow32(dev, TCTL, TCTL_EN);
/* Setup RX descriptor */
dev->rx.addr = POINTER_TO_INT(dev->rxb);
dev->rx.len = sizeof(dev->rxb);
iow32(dev, RDBAL, (uint32_t)POINTER_TO_UINT(&dev->rx));
iow32(dev, RDBAH, (uint32_t)((POINTER_TO_UINT(&dev->rx) >> 16) >> 16));
iow32(dev, RDLEN, 1*16);
iow32(dev, RDH, 0);
iow32(dev, RDT, 1);
iow32(dev, IMS, IMS_RXO);
ral = ior32(dev, RAL);
rah = ior32(dev, RAH);
memcpy(dev->mac, &ral, 4);
memcpy(dev->mac + 4, &rah, 2);
return 0;
}
BUILD_ASSERT(DT_INST_IRQN(0) != PCIE_IRQ_DETECT,
"Dynamic IRQ allocation is not supported");
static void e1000_iface_init(struct net_if *iface)
{
struct e1000_dev *dev = net_if_get_device(iface)->data;
const struct e1000_config *config = net_if_get_device(iface)->config;
/* For VLAN, this value is only used to get the correct L2 driver.
* The iface pointer in device context should contain the main
* interface if the VLANs are enabled.
*/
if (dev->iface == NULL) {
dev->iface = iface;
/* Do the phy link up only once */
config->config_func(dev);
}
ethernet_init(iface);
net_if_set_link_addr(iface, dev->mac, sizeof(dev->mac),
NET_LINK_ETHERNET);
LOG_DBG("done");
}
static const struct ethernet_api e1000_api = {
.iface_api.init = e1000_iface_init,
#if defined(CONFIG_ETH_E1000_PTP_CLOCK)
.get_ptp_clock = e1000_get_ptp_clock,
#endif
.get_capabilities = e1000_caps,
.send = e1000_send,
};
#define E1000_PCI_INIT(inst) \
DEVICE_PCIE_INST_DECLARE(inst); \
\
static struct e1000_dev dev_##inst = { \
DEVICE_PCIE_INST_INIT(inst, pcie), \
}; \
\
static void e1000_config_##inst(const struct e1000_dev *dev) \
{ \
IRQ_CONNECT(DT_INST_IRQN(inst), \
DT_INST_IRQ(inst, priority), \
e1000_isr, DEVICE_DT_INST_GET(inst), \
DT_INST_IRQ(inst, sense)); \
\
irq_enable(DT_INST_IRQN(0)); \
iow32(dev, CTRL, CTRL_SLU); /* Set link up */ \
iow32(dev, RCTL, RCTL_EN | RCTL_MPE); \
} \
\
static const struct e1000_config config_##inst = { \
.config_func = e1000_config_##inst, \
}; \
\
ETH_NET_DEVICE_DT_INST_DEFINE(inst, \
e1000_probe, \
NULL, \
&dev_##inst, \
&config_##inst, \
CONFIG_ETH_INIT_PRIORITY, \
&e1000_api, \
NET_ETH_MTU);
DT_INST_FOREACH_STATUS_OKAY(E1000_PCI_INIT);
#if defined(CONFIG_ETH_E1000_PTP_CLOCK)
struct ptp_context {
struct e1000_dev *eth_context;
/* Simulate the clock. This is only for testing.
* The value is in nanoseconds
*/
uint64_t clock_time;
};
static int ptp_clock_e1000_set(const struct device *dev,
struct net_ptp_time *tm)
{
struct ptp_context *ptp_context = dev->data;
/* TODO: Set the clock real value here */
ptp_context->clock_time = tm->second * NSEC_PER_SEC + tm->nanosecond;
return 0;
}
static int ptp_clock_e1000_get(const struct device *dev,
struct net_ptp_time *tm)
{
struct ptp_context *ptp_context = dev->data;
/* TODO: Get the clock value */
tm->second = ptp_context->clock_time / NSEC_PER_SEC;
tm->nanosecond = ptp_context->clock_time - tm->second * NSEC_PER_SEC;
return 0;
}
static int ptp_clock_e1000_adjust(const struct device *dev, int increment)
{
ARG_UNUSED(dev);
ARG_UNUSED(increment);
/* TODO: Implement clock adjustment */
return 0;
}
static int ptp_clock_e1000_rate_adjust(const struct device *dev, double ratio)
{
const int hw_inc = NSEC_PER_SEC / CONFIG_ETH_E1000_PTP_CLOCK_SRC_HZ;
struct ptp_context *ptp_context = dev->data;
struct e1000_dev *context = ptp_context->eth_context;
int corr;
int32_t mul;
float val;
/* No change needed. */
if (ratio == 1.0f) {
return 0;
}
ratio *= context->clk_ratio;
/* Limit possible ratio. */
if ((ratio > 1.0f + 1.0f/(2 * hw_inc)) ||
(ratio < 1.0f - 1.0f/(2 * hw_inc))) {
return -EINVAL;
}
/* Save new ratio. */
context->clk_ratio = ratio;
if (ratio < 1.0f) {
corr = hw_inc - 1;
val = 1.0f / (hw_inc * (1.0f - ratio));
} else if (ratio > 1.0f) {
corr = hw_inc + 1;
val = 1.0f / (hw_inc * (ratio - 1.0f));
} else {
val = 0;
corr = hw_inc;
}
if (val >= INT32_MAX) {
/* Value is too high.
* It is not possible to adjust the rate of the clock.
*/
mul = 0;
} else {
mul = val;
}
/* TODO: Adjust the clock here */
return 0;
}
static const struct ptp_clock_driver_api api = {
.set = ptp_clock_e1000_set,
.get = ptp_clock_e1000_get,
.adjust = ptp_clock_e1000_adjust,
.rate_adjust = ptp_clock_e1000_rate_adjust,
};
static int ptp_e1000_init(const struct device *port)
{
struct ptp_context *ptp_context = port->data;
struct e1000_dev *context = ptp_context->eth_context;
context->ptp_clock = port;
ptp_context->clock_time = k_ticks_to_ns_floor64(k_uptime_ticks());
return 0;
}
#define E1000_PTP_INIT(inst) \
static struct ptp_context ptp_e1000_context_##inst = { \
.eth_context = DEVICE_DT_INST_GET(inst)->data, \
}; \
\
DEVICE_DEFINE(e1000_ptp_clock, PTP_CLOCK_NAME, \
ptp_e1000_init, NULL, \
&ptp_e1000_context_##inst, NULL, POST_KERNEL, \
CONFIG_APPLICATION_INIT_PRIORITY, &api);
DT_INST_FOREACH_STATUS_OKAY(E1000_PTP_INIT);
#endif /* CONFIG_ETH_E1000_PTP_CLOCK */