| /* |
| * Copyright (c) 2018 Savoir-Faire Linux. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #ifndef __SPI_NOR_H__ |
| #define __SPI_NOR_H__ |
| |
| #include <zephyr/sys/util.h> |
| |
| #define SPI_NOR_MAX_ID_LEN 3 |
| |
| /* Status register bits */ |
| #define SPI_NOR_WIP_BIT BIT(0) /* Write in progress */ |
| #define SPI_NOR_WEL_BIT BIT(1) /* Write enable latch */ |
| |
| /* Flash opcodes */ |
| #define SPI_NOR_CMD_WRSR 0x01 /* Write status register */ |
| #define SPI_NOR_CMD_RDSR 0x05 /* Read status register */ |
| #define SPI_NOR_CMD_WRSR2 0x31 /* Write status register 2 */ |
| #define SPI_NOR_CMD_RDSR2 0x35 /* Read status register 2 */ |
| #define SPI_NOR_CMD_RDSR3 0x15 /* Read status register 3 */ |
| #define SPI_NOR_CMD_WRSR3 0x11 /* Write status register 3 */ |
| #define SPI_NOR_CMD_READ 0x03 /* Read data */ |
| #define SPI_NOR_CMD_READ_FAST 0x0B /* Read data */ |
| #define SPI_NOR_CMD_DREAD 0x3B /* Read data (1-1-2) */ |
| #define SPI_NOR_CMD_2READ 0xBB /* Read data (1-2-2) */ |
| #define SPI_NOR_CMD_QREAD 0x6B /* Read data (1-1-4) */ |
| #define SPI_NOR_CMD_4READ 0xEB /* Read data (1-4-4) */ |
| #define SPI_NOR_CMD_WREN 0x06 /* Write enable */ |
| #define SPI_NOR_CMD_WRDI 0x04 /* Write disable */ |
| #define SPI_NOR_CMD_PP 0x02 /* Page program */ |
| #define SPI_NOR_CMD_PP_1_1_2 0xA2 /* Dual Page program (1-1-2) */ |
| #define SPI_NOR_CMD_PP_1_1_4 0x32 /* Quad Page program (1-1-4) */ |
| #define SPI_NOR_CMD_PP_1_4_4 0x38 /* Quad Page program (1-4-4) */ |
| #define SPI_NOR_CMD_RDCR 0x15 /* Read control register */ |
| #define SPI_NOR_CMD_SE 0x20 /* Sector erase */ |
| #define SPI_NOR_CMD_SE_4B 0x21 /* Sector erase 4 byte address*/ |
| #define SPI_NOR_CMD_BE_32K 0x52 /* Block erase 32KB */ |
| #define SPI_NOR_CMD_BE 0xD8 /* Block erase */ |
| #define SPI_NOR_CMD_CE 0xC7 /* Chip erase */ |
| #define SPI_NOR_CMD_RDID 0x9F /* Read JEDEC ID */ |
| #define SPI_NOR_CMD_ULBPR 0x98 /* Global Block Protection Unlock */ |
| #define SPI_NOR_CMD_4BA 0xB7 /* Enter 4-Byte Address Mode */ |
| #define SPI_NOR_CMD_DPD 0xB9 /* Deep Power Down */ |
| #define SPI_NOR_CMD_RDPD 0xAB /* Release from Deep Power Down */ |
| #define SPI_NOR_CMD_WR_CFGREG2 0x72 /* Write config register 2 */ |
| #define SPI_NOR_CMD_RD_CFGREG2 0x71 /* Read config register 2 */ |
| #define SPI_NOR_CMD_RESET_EN 0x66 /* Reset Enable */ |
| #define SPI_NOR_CMD_RESET_MEM 0x99 /* Reset Memory */ |
| #define SPI_NOR_CMD_BULKE 0x60 /* Bulk Erase */ |
| #define SPI_NOR_CMD_READ_4B 0x13 /* Read data 4 Byte Address */ |
| #define SPI_NOR_CMD_READ_FAST_4B 0x0C /* Fast Read 4 Byte Address */ |
| #define SPI_NOR_CMD_DREAD_4B 0x3C /* Read data (1-1-2) 4 Byte Address */ |
| #define SPI_NOR_CMD_2READ_4B 0xBC /* Read data (1-2-2) 4 Byte Address */ |
| #define SPI_NOR_CMD_QREAD_4B 0x6C /* Read data (1-1-4) 4 Byte Address */ |
| #define SPI_NOR_CMD_4READ_4B 0xEC /* Read data (1-4-4) 4 Byte Address */ |
| #define SPI_NOR_CMD_PP_4B 0x12 /* Page Program 4 Byte Address */ |
| #define SPI_NOR_CMD_PP_1_1_4_4B 0x34 /* Quad Page program (1-1-4) 4 Byte Address */ |
| #define SPI_NOR_CMD_PP_1_4_4_4B 0x3e /* Quad Page program (1-4-4) 4 Byte Address */ |
| |
| /* Flash octal opcodes */ |
| #define SPI_NOR_OCMD_SE 0x21DE /* Octal Sector erase */ |
| #define SPI_NOR_OCMD_CE 0xC738 /* Octal Chip erase */ |
| #define SPI_NOR_OCMD_RDSR 0x05FA /* Octal Read status register */ |
| #define SPI_NOR_OCMD_DTR_RD 0xEE11 /* Octal IO DTR read command */ |
| #define SPI_NOR_OCMD_RD 0xEC13 /* Octal IO read command */ |
| #define SPI_NOR_OCMD_PAGE_PRG 0x12ED /* Octal Page Prog */ |
| #define SPI_NOR_OCMD_WREN 0x06F9 /* Octal Write enable */ |
| #define SPI_NOR_OCMD_NOP 0x00FF /* Octal No operation */ |
| #define SPI_NOR_OCMD_RESET_EN 0x6699 /* Octal Reset Enable */ |
| #define SPI_NOR_OCMD_RESET_MEM 0x9966 /* Octal Reset Memory */ |
| #define SPI_NOR_OCMD_WR_CFGREG2 0x728D /* Octal Write configuration Register2 */ |
| #define SPI_NOR_OCMD_RD_CFGREG2 0x718E /* Octal Read configuration Register2 */ |
| #define SPI_NOR_OCMD_BULKE 0x609F /* Octa Bulk Erase */ |
| |
| /* Page, sector, and block size are standard, not configurable. */ |
| #define SPI_NOR_PAGE_SIZE 0x0100U |
| #define SPI_NOR_SECTOR_SIZE 0x1000U |
| #define SPI_NOR_BLOCK_SIZE 0x10000U |
| |
| /* Flash Auto-polling values */ |
| #define SPI_NOR_WREN_MATCH 0x02 |
| #define SPI_NOR_WREN_MASK 0x02 |
| |
| #define SPI_NOR_WEL_MATCH 0x00 |
| #define SPI_NOR_WEL_MASK 0x02 |
| |
| #define SPI_NOR_MEM_RDY_MATCH 0x00 |
| #define SPI_NOR_MEM_RDY_MASK 0x01 |
| |
| #define SPI_NOR_AUTO_POLLING_INTERVAL 0x10 |
| |
| /* Flash Dummy Cycles values */ |
| #define SPI_NOR_DUMMY_RD 8U |
| #define SPI_NOR_DUMMY_RD_OCTAL 6U |
| #define SPI_NOR_DUMMY_RD_OCTAL_DTR 6U |
| #define SPI_NOR_DUMMY_REG_OCTAL 4U |
| #define SPI_NOR_DUMMY_REG_OCTAL_DTR 5U |
| |
| |
| /* Memory registers address */ |
| #define SPI_NOR_REG2_ADDR1 0x0000000 |
| #define SPI_NOR_CR2_STR_OPI_EN 0x01 |
| #define SPI_NOR_CR2_DTR_OPI_EN 0x02 |
| #define SPI_NOR_REG2_ADDR3 0x00000300 |
| #define SPI_NOR_CR2_DUMMY_CYCLES_66MHZ 0x07 |
| |
| /* Test whether offset is aligned to a given number of bits. */ |
| #define SPI_NOR_IS_ALIGNED(_ofs, _bits) (((_ofs) & BIT_MASK(_bits)) == 0) |
| #define SPI_NOR_IS_SECTOR_ALIGNED(_ofs) SPI_NOR_IS_ALIGNED(_ofs, 12) |
| |
| #endif /*__SPI_NOR_H__*/ |