# SPDX-License-Identifier: Apache-2.0

if SOC_SERIES_BSIM_NRFXX

config BUILD_OUTPUT_BIN
	default n

config BUILD_OUTPUT_EXE
	# When the IPC service is used, the net core image requires the application core image, as it needs
	# access to its IPC buffer. Without it, the executable cannot be built.
	default y if !(BOARD_NRF5340BSIM_NRF5340_CPUNET && IPC_SERVICE && (NATIVE_SIMULATOR_EXTRA_IMAGE_PATHS = ""))

config OUTPUT_PRINT_MEMORY_USAGE
	default n

config BOARD
	default "nrf52_bsim" if BOARD_NRF52_BSIM
	default "nrf5340bsim_nrf5340_cpunet" if BOARD_NRF5340BSIM_NRF5340_CPUNET
	default "nrf5340bsim_nrf5340_cpuapp" if BOARD_NRF5340BSIM_NRF5340_CPUAPP

config NATIVE_SIMULATOR_NUMBER_MCUS
	default 2 if BOARD_NRF5340BSIM_NRF5340_CPUNET || BOARD_NRF5340BSIM_NRF5340_CPUAPP
	default 1

config NATIVE_SIMULATOR_MCU_N
	default 1 if BOARD_NRF5340BSIM_NRF5340_CPUNET
	default 0

config NATIVE_SIMULATOR_AUTOSTART_MCU
	default y if BOARD_NRF5340BSIM_NRF5340_CPUNET

config NATIVE_SIMULATOR_PRIMARY_MCU_INDEX
	default 1 if SOC_SERIES_BSIM_NRF53X
	default 0

config SYS_CLOCK_HW_CYCLES_PER_SEC
	default 32768

config SYS_CLOCK_TICKS_PER_SEC
	default 128 if !TICKLESS_KERNEL
	default 32768

config BT_CTLR
	default y if BOARD_NRF52_BSIM || BOARD_NRF5340BSIM_NRF5340_CPUNET
	depends on BT

config HEAP_MEM_POOL_ADD_SIZE_BOARD
	int
	default 4096 if BT_HCI_IPC
	default 4096 if NRF_802154_SER_HOST && BOARD_NRF5340BSIM_NRF5340_CPUAPP
	default 4096 if NRF_802154_SER_RADIO && BOARD_NRF5340BSIM_NRF5340_CPUNET

if BOARD_NRF5340BSIM_NRF5340_CPUAPP || BOARD_NRF5340BSIM_NRF5340_CPUNET

config MBOX_NRFX_IPC
	default MBOX

endif # BOARD_NRF5340BSIM_NRF5340_CPUAPP || BOARD_NRF5340BSIM_NRF5340_CPUNET

if BOARD_NRF5340BSIM_NRF5340_CPUAPP

config IPC_SERVICE_BACKEND_RPMSG_SHMEM_RESET
	default y if IPC_SERVICE_BACKEND_RPMSG

choice BT_HCI_BUS_TYPE
	default BT_HCI_IPC
endchoice

endif # BOARD_NRF5340BSIM_NRF5340_CPUAPP

# The 15.4 driver Tx encryption is currently not functional with this
# simulated board => we disable it by default. With this Openthread will normally
# default to encrypt packets on its own.
config NRF_802154_ENCRYPTION
	default n

if LOG

# For this board we can log synchronously without any problem
# Doing so will be nicer for debugging
choice LOG_MODE
	default LOG_MODE_IMMEDIATE
endchoice

endif # LOG

if CONSOLE

config POSIX_ARCH_CONSOLE
	default y

endif # CONSOLE

endif # SOC_SERIES_BSIM_NRFXX