# Copyright (c) 2023, Ambiq Micro Inc.
# SPDX-License-Identifier: Apache-2.0

description: |
    Bluetooth module that uses Ambiq's Bluetooth Host Controller Interface SPI
    driver (e.g. Apollo4 Blue Plus).

compatible: "ambiq,bt-hci-spi"

include: [spi-device.yaml, bt-hci.yaml]

properties:
  reg:
    type: array
    required: true

  irq-gpios:
    type: phandle-array
    description: |
      This irq gpio is used to indicate there is packet ready to send to host
      from controller.

  reset-gpios:
    type: phandle-array
    description: |
      This reset gpio is used to reset the Bluetooth controller.

  clkreq-gpios:
    type: phandle-array
    description: |
      This clkreq gpio is used to send the XO32MHz clock request to host from
      controller. The host needs to enable XO32MHz when receiving low to high
      edge interrupts and disable XO32MHz when receiving high to low edge
      interrupts.

  bt-hci-name:
    default: "ambiq hci"

  bt-hci-bus:
    default: "BT_HCI_BUS_SPI"