/*
 * Copyright (c) 2019 SEAL AG
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv7-m.dtsi>
#include <dt-bindings/clock/kinetis_mcg.h>
#include <dt-bindings/clock/kinetis_sim.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/i2c/i2c.h>

/ {
	aliases {
		adc-0 = &adc0;
		i2c-0 = &i2c0;
		i2c-1 = &i2c1;
		i2c-2 = &i2c2;
		i2c-3 = &i2c3;
		pinmux-a = &porta;
		pinmux-b = &portb;
		pinmux-c = &portc;
		pinmux-d = &portd;
		pinmux-e = &porte;
		spi-0 = &spi0;
		spi-1 = &spi1;
		spi-2 = &spi2;
		uart-0 = &lpuart0;
		uart-1 = &lpuart1;
		uart-2 = &lpuart2;
		uart-3 = &lpuart3;
		uart-4 = &lpuart4;
		usbd-0 = &usbotg;
		watchdog0 = &wdog;
	};

	chosen {
		zephyr,entropy = &trng;
		zephyr,flash-controller = &ftfa;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m4f";
			reg = <0>;
		};
	};

	soc {
		mpu: mpu@4000d000 {
			compatible = "nxp,kinetis-mpu";
			reg = <0x4000d000 0x1000>;
			status = "disabled";
		};

		sim: sim@40047000 {
			compatible = "nxp,kinetis-sim";
			reg = <0x40047000 0x2000>;
			label = "SIM";
			#clock-cells = <3>;
		};

		mcg: clock-controller@40064000 {
			compatible = "nxp,kinetis-mcg";
			reg = <0x40064000 0x1000>;
			label = "MCG";
			#clock-cells = <1>;
		};

		osc: clock-controller@40065000 {
			compatible = "nxp,k8x-osc";
			reg = <0x40065000 0x4>;
			enable-external-reference;
		};

		ftfa: flash-controller@40020000 {
			compatible = "nxp,kinetis-ftfa";
			label = "FLASH_CTRL";
			reg = <0x40020000 0x1000>;
			interrupts = <18 0>, <19 0>;
			interrupt-names = "command-complete", "read-collision";

			#address-cells = <1>;
			#size-cells = <1>;
		};

		adc0: adc@4003b000 {
			compatible = "nxp,kinetis-adc16";
			reg = <0x4003b000 0x1000>;
			interrupts = <39 0>;
			label = "ADC_0";
			status = "disabled";
			#io-channel-cells = <1>;
		};

		gpioa: gpio@400ff000 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff000 0x40>;
			interrupts = <59 2>;
			label = "GPIO_0";
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&porta>;
		};

		gpiob: gpio@400ff040 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff040 0x40>;
			interrupts = <60 2>;
			label = "GPIO_1";
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&portb>;
		};

		gpioc: gpio@400ff080 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff080 0x40>;
			interrupts = <61 2>;
			label = "GPIO_2";
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&portc>;
		};

		gpiod: gpio@400ff0c0 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff0c0 0x40>;
			interrupts = <62 2>;
			label = "GPIO_3";
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&portd>;
		};

		gpioe: gpio@400ff100 {
			compatible = "nxp,kinetis-gpio";
			status = "disabled";
			reg = <0x400ff100 0x40>;
			interrupts = <63 2>;
			label = "GPIO_4";
			gpio-controller;
			#gpio-cells = <2>;
			nxp,kinetis-port = <&porte>;
		};

		i2c0: i2c@40066000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40066000 0x1000>;
			interrupts = <24 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 6>;
			label = "I2C_0";
			status = "disabled";
		};

		i2c1: i2c@40067000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40067000 0x1000>;
			interrupts = <25 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 7>;
			label = "I2C_1";
			status = "disabled";
		};

		i2c2: i2c@400e6000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x400e6000 0x1000>;
			interrupts = <74 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1028 6>;
			label = "I2C_2";
			status = "disabled";
		};

		i2c3: i2c@400e7000 {
			compatible = "nxp,kinetis-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x400e7000 0x1000>;
			interrupts = <91 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1028 7>;
			label = "I2C_3";
			status = "disabled";
		};

		lpuart0: lpuart@400c4000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400c4000 0x1000>;
			interrupts = <30 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 4>;
			label = "UART_0";
			status = "disabled";
		};

		lpuart1: lpuart@400c5000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400c5000 0x1000>;
			interrupts = <31 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 5>;
			label = "UART_1";
			status = "disabled";
		};

		lpuart2: lpuart@400c6000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400c6000 0x1000>;
			interrupts = <32 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 6>;
			label = "UART_2";
			status = "disabled";
		};

		lpuart3: lpuart@400c7000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400c7000 0x1000>;
			interrupts = <33 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 7>;
			label = "UART_3";
			status = "disabled";
		};

		lpuart4: lpuart@400d6000 {
			compatible = "nxp,kinetis-lpuart";
			reg = <0x400d6000 0x1000>;
			interrupts = <34 0>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 22>;
			label = "UART_4";
			status = "disabled";
		};

		porta: pinmux@40049000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x40049000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 9>;
		};

		portb: pinmux@4004a000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004a000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 10>;
		};

		portc: pinmux@4004b000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004b000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 11>;
		};

		portd: pinmux@4004c000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004c000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 12>;
		};

		porte: pinmux@4004d000 {
			compatible = "nxp,kinetis-pinmux";
			reg = <0x4004d000 0x1000>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 13>;
		};

		ftm0: ftm@40038000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40038000 0x1000>;
			interrupts = <42 0>;
			clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>;
			prescaler = <16>;
			label = "FTM_0";
			status = "disabled";
		};

		ftm1: ftm@40039000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x40039000 0x1000>;
			interrupts = <43 0>;
			clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>;
			prescaler = <16>;
			label = "FTM_1";
			status = "disabled";
		};

		ftm2: ftm@4003a000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x4003a000 0x1000>;
			interrupts = <44 0>;
			clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>;
			prescaler = <16>;
			label = "FTM_2";
			status = "disabled";
		};

		ftm3: ftm@400b9000 {
			compatible = "nxp,kinetis-ftm";
			reg = <0x400b9000 0x1000>;
			interrupts = <71 0>;
			clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>;
			prescaler = <16>;
			label = "FTM_3";
			status = "disabled";
		};

		rtc: rtc@4003d000 {
			compatible = "nxp,kinetis-rtc";
			reg = <0x4003d000 0x1000>;
			interrupts = <46 0>, <47 0>;
			interrupt-names = "alarm", "seconds";
			clock-frequency = <32768>;
			prescaler = <32768>;
			label = "RTC_0";
		};

		spi0: spi@4002c000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x4002c000 0x1000>;
			interrupts = <26 3>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x103c 12>;
			label = "SPI_0";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		spi1: spi@4002d000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x4002d000 0x1000>;
			interrupts = <27 3>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x103c 13>;
			label = "SPI_1";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		spi2: spi@400ac000 {
			compatible = "nxp,kinetis-dspi";
			reg = <0x400ac000 0x1000>;
			interrupts = <65 3>;
			clocks = <&sim KINETIS_SIM_BUS_CLK 0x1030 12>;
			label = "SPI_2";
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};

		trng: random@400a0000 {
			compatible = "nxp,kinetis-trng";
			reg = <0x400a0000 0x1000>;
			interrupts = <23 0>;
			label = "TRNG";
		};

		usbotg: usbd@40072000 {
			compatible = "nxp,kinetis-usbd";
			reg = <0x40072000 0x1000>;
			interrupts = <53 1>;
			interrupt-names = "usb_otg";
			num-bidir-endpoints = <16>;
			status = "disabled";
			label = "USBD";
		};

		wdog: watchdog@40052000 {
			compatible = "nxp,kinetis-wdog";
			reg = <0x40052000 0x1000>;
			interrupts = <22 0>;
			clocks = <&sim KINETIS_SIM_LPO_CLK 0 0>;
			label = "WDT_0";
		};
	};
};

&nvic {
	arm,num-irq-priority-bits = <4>;
};