/** @file
 *  @brief Generic Attribute Profile handling.
 */

/*
 * Copyright (c) 2015 Intel Corporation
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef __BT_GATT_H
#define __BT_GATT_H

#ifdef __cplusplus
extern "C" {
#endif

#if defined(CONFIG_BLUETOOTH_CENTRAL) || defined(CONFIG_BLUETOOTH_PERIPHERAL)
#include <stddef.h>
#include <sys/types.h>
#include <misc/util.h>
#include <bluetooth/conn.h>
#include <bluetooth/uuid.h>
#include <bluetooth/att.h>

/* GATT attribute permission bit field values */

/** @def BT_GATT_PERM_READ
 *  @brief Attribute read permission.
 */
#define BT_GATT_PERM_READ			0x01
/** @def BT_GATT_PERM_WRITE
 *  @brief Attribute write permission.
 */
#define BT_GATT_PERM_WRITE			0x02
/** @def BT_GATT_PERM_READ_ENCRYPT
 *  @brief Attribute read permission with encryption.
 *
 *  If set, requires encryption for read access.
 */
#define BT_GATT_PERM_READ_ENCRYPT		0x04
/** @def BT_GATT_PERM_WRITE_ENCRYPT
 *  @brief Attribute write permission with encryption.
 *
 *  If set, requires encryption for write access.
 */
#define BT_GATT_PERM_WRITE_ENCRYPT		0x08
/** @def BT_GATT_PERM_READ_AUTHEN
 *  @brief Attribute read permission with authentication.
 *
 *  If set, requires encryption using authenticated link-key for read access.
 */
#define BT_GATT_PERM_READ_AUTHEN		0x10
/** @def BT_GATT_PERM_WRITE_AUTHEN
 *  @brief Attribute write permission with authentication.
 *
 *  If set, requires encryption using authenticated link-key for write access.
 */
#define BT_GATT_PERM_WRITE_AUTHEN		0x20
/** @def BT_GATT_PERM_READ_AUTHOR
 *  @brief Attribute read permission with authorization.
 *
 *  If set, requires authorization for read access.
 */
#define BT_GATT_PERM_READ_AUTHOR		0x40
/** @def BT_GATT_PERM_WRITE_AUTHOR
 *  @brief Attribute write permission with authorization.
 *
 *  If set, requires authorization for write access.
 */
#define BT_GATT_PERM_WRITE_AUTHOR		0x80

/* GATT attribute flush flags */
/** @def BT_GATT_FLUSH_DISCARD
 *  @brief Attribute flush discard flag.
 */
#define BT_GATT_FLUSH_DISCARD			0x00
/** @def BT_GATT_FLUSH_DISCARD
 *  @brief Attribute flush synchronize flag.
 */
#define BT_GATT_FLUSH_SYNC			0x01

/**  @def BT_GATT_ERR
  *  @brief Construct error return value for attribute read, write and
  *         flush callbacks.
  *
  *  @param _att_err ATT error code
  *
  *  @return Appropriate error code for the attribute callbacks.
  *
  */
#define BT_GATT_ERR(_att_err)                  (-(_att_err))

/** @brief GATT Attribute structure. */
struct bt_gatt_attr {
	/** Attribute UUID */
	const struct bt_uuid	*uuid;

	/** Attribute read callback
	 *
	 *  @param conn   The connection that is requesting to read
	 *  @param attr   The attribute that's being read
	 *  @param buf    Buffer to place the read result in
	 *  @param len    Length of data to read
	 *  @param offset Offset to start reading from
	 *
	 *  @return Number fo bytes read, or in case of an error
	 *          BT_GATT_ERR() with a specific ATT error code.
	 */
	ssize_t			(*read)(struct bt_conn *conn,
					const struct bt_gatt_attr *attr,
					void *buf, uint16_t len,
					uint16_t offset);

	/** Attribute write callback
	 *
	 *  @param conn   The connection that is requesting to write
	 *  @param attr   The attribute that's being read
	 *  @param buf    Buffer with the data to write
	 *  @param len    Number of bytes in the buffer
	 *  @param offset Offset to start writing from
	 *
	 *  @return Number of bytes written, or in case of an error
	 *          BT_GATT_ERR() with a specific ATT error code.
	 */
	ssize_t			(*write)(struct bt_conn *conn,
					 const struct bt_gatt_attr *attr,
					 const void *buf, uint16_t len,
					 uint16_t offset);

	/** Attribute flush callback
	 *
	 *  If this callback is provided (non-NULL) every write
	 *  operation will be followed by a call to it. The expectation
	 *  is for the attribute implementation to only commit the write
	 *  result once this is called.
	 *
	 *  @param conn   The connection that is requesting to write
	 *  @param attr   The attribute that's being read
	 *  @param flags  Flags (BT_GATT_FLUSH_*)
	 *
	 *  @return Number of bytes flushed, or in case of an error
	 *          BT_GATT_ERR() with a specific ATT error code.
	 */
	ssize_t			(*flush)(struct bt_conn *conn,
					 const struct bt_gatt_attr *attr,
					 uint8_t flags);

	/** Attribute user data */
	void			*user_data;
	/** Attribute handle */
	uint16_t		handle;
	/** Attribute permissions */
	uint8_t			perm;
#if defined(CONFIG_BLUETOOTH_GATT_DYNAMIC_DB)
	struct bt_gatt_attr	*_next;
#endif /* CONFIG_BLUETOOTH_GATT_DYNAMIC_DB */
};

/** @brief Service Attribute Value. */
struct bt_gatt_service {
	/** Service UUID. */
	const struct bt_uuid	*uuid;
	/** Service end handle. */
	uint16_t		end_handle;
};

/** @brief Include Attribute Value. */
struct bt_gatt_include {
	/** Service UUID. */
	const struct bt_uuid	*uuid;
	/** Service start handle. */
	uint16_t		start_handle;
	/** Service end handle. */
	uint16_t		end_handle;
};

/* Characteristic Properties Bit field values */

/** @def BT_GATT_CHRC_BROADCAST
 *  @brief Characteristic broadcast property.
 *
 *  If set, permits broadcasts of the Characteristic Value using Server
 *  Characteristic Configuration Descriptor.
 */
#define BT_GATT_CHRC_BROADCAST			0x01
/** @def BT_GATT_CHRC_READ
 *  @brief Characteristic read property.
 *
 *  If set, permits reads of the Characteristic Value.
 */
#define BT_GATT_CHRC_READ			0x02
/** @def BT_GATT_CHRC_WRITE_WITHOUT_RESP
 *  @brief Characteristic write without response property.
 *
 *  If set, permits write of the Characteristic Value without response.
 */
#define BT_GATT_CHRC_WRITE_WITHOUT_RESP		0x04
/** @def BT_GATT_CHRC_WRITE
 *  @brief Characteristic write with response property.
 *
 *  If set, permits write of the Characteristic Value with response.
 */
#define BT_GATT_CHRC_WRITE			0x08
/** @def BT_GATT_CHRC_NOTIFY
 *  @brief Characteristic notify property.
 *
 *  If set, permits notifications of a Characteristic Value without
 *  acknowledgment.
 */
#define BT_GATT_CHRC_NOTIFY			0x10
/** @def BT_GATT_CHRC_INDICATE
 *  @brief Characteristic indicate property.
 *
 * If set, permits indications of a Characteristic Value with acknowledgment.
 */
#define BT_GATT_CHRC_INDICATE			0x20
/** @def BT_GATT_CHRC_AUTH
 *  @brief Characteristic Authenticated Signed Writes property.
 *
 *  If set, permits signed writes to the Characteristic Value.
 */
#define BT_GATT_CHRC_AUTH			0x40
/** @def BT_GATT_CHRC_EXT_PROP
 *  @brief Characteristic Extended Properties property.
 *
 * If set, additional characteristic properties are defined in the
 * Characteristic Extended Properties Descriptor.
 */
#define BT_GATT_CHRC_EXT_PROP			0x80

/** @brief Characteristic Attribute Value. */
struct bt_gatt_chrc {
	/** Characteristic UUID. */
	const struct bt_uuid	*uuid;
	/** Characteristic properties. */
	uint8_t			properties;
};

/* Characteristic Extended Properties Bit field values */
#define BT_GATT_CEP_RELIABLE_WRITE		0x0001
#define BT_GATT_CEP_WRITABLE_AUX		0x0002

/** @brief Characteristic Extended Properties Attribute Value. */
struct bt_gatt_cep {
	/** Characteristic Extended properties */
	uint16_t		properties;
};

/* Client Characteristic Configuration Values */

/** @def BT_GATT_CCC_NOTIFY
 *  @brief Client Characteristic Configuration Notification.
 *
 *  If set, changes to Characteristic Value shall be notified.
 */
#define BT_GATT_CCC_NOTIFY			0x0001
/** @def BT_GATT_CCC_INDICATE
 *  @brief Client Characteristic Configuration Indication.
 *
 *  If set, changes to Characteristic Value shall be indicated.
 */
#define BT_GATT_CCC_INDICATE			0x0002

/* Client Characteristic Configuration Attribute Value */
struct bt_gatt_ccc {
	/** Client Characteristic Configuration flags */
	uint16_t		flags;
};

/** @brief GATT Characteristic Presentation Format Attribute Value. */
struct bt_gatt_cpf {
	/** Format of the value of the characteristic */
	uint8_t format;
	/** Exponent field to determine how the value of this characteristic is further formatted */
	int8_t exponent;
	/** Unit of the characteristic */
	uint16_t unit;
	/** Name space of the description */
	uint8_t name_space;
	/** Description of the characteristic as defined in a higher layer profile */
	uint16_t description;
} __packed;

/* Server API */

/** @brief Register attribute database.
 *
 *  Register GATT attribute database table. Applications can make use of
 *  macros such as BT_GATT_PRIMARY_SERVICE, BT_GATT_CHARACTERISTIC,
 *  BT_GATT_DESCRIPTOR, etc.
 *
 *  @param attrs Database table containing the available attributes.
 *  @param count Size of the database table.
 *
 * @return 0 in case of success or negative value in case of error.
 */
int bt_gatt_register(struct bt_gatt_attr *attrs, size_t count);

enum {
	BT_GATT_ITER_STOP = 0,
	BT_GATT_ITER_CONTINUE,
};

/** @brief Attribute iterator callback.
 *
 *  @param attr Attribute found.
 *  @param user_data Data given.
 *
 *  @return BT_GATT_ITER_CONTINUE if should continue to the next attribute
 *  or BT_GATT_ITER_STOP to stop.
 */
typedef uint8_t (*bt_gatt_attr_func_t)(const struct bt_gatt_attr *attr,
				       void *user_data);

/** @brief Attribute iterator.
 *
 *  Iterate attributes in the given range.
 *
 *  @param start_handle Start handle.
 *  @param end_handle End handle.
 *  @param func Callback function.
 *  @param user_data Data to pass to the callback.
 */
void bt_gatt_foreach_attr(uint16_t start_handle, uint16_t end_handle,
			  bt_gatt_attr_func_t func, void *user_data);

/** @brief Iterate to the next attribute
 *
 *  Iterate to the next attribute following a given attribute.
 *
 *  @param attr Current Attribute.
 *
 *  @return The next attribute or NULL if it cannot be found.
 */
struct bt_gatt_attr *bt_gatt_attr_next(const struct bt_gatt_attr *attr);

/** @brief Generic Read Attribute value helper.
 *
 *  Read attribute value storing the result into buffer.
 *
 *  @param conn Connection object.
 *  @param attr Attribute to read.
 *  @param buf Buffer to store the value.
 *  @param buf_len Buffer length.
 *  @param offset Start offset.
 *  @param value Attribute value.
 *  @param value_len Length of the attribute value.
 *
 *  @return int number of bytes read in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_read(struct bt_conn *conn, const struct bt_gatt_attr *attr,
			  void *buf, uint16_t buf_len, uint16_t offset,
			  const void *value, uint16_t value_len);

/** @brief Read Service Attribute helper.
 *
 *  Read service attribute value storing the result into buffer after
 *  enconding it.
 *  NOTE: Only use this with attributes which user_data is a bt_uuid.
 *
 *  @param conn Connection object.
 *  @param attr Attribute to read.
 *  @param buf Buffer to store the value read.
 *  @param len Buffer length.
 *  @param offset Start offset.
 *
 *  @return int number of bytes read in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_read_service(struct bt_conn *conn,
				  const struct bt_gatt_attr *attr,
				  void *buf, uint16_t len, uint16_t offset);

/** @def BT_GATT_SERVICE
 *  @brief Generic Service Declaration Macro.
 *
 *  Helper macro to declare a service attribute.
 *
 *  @param _uuid Service attribute type.
 *  @param _data Service attribute value.
 */
#define BT_GATT_SERVICE(_uuid, _service)				\
{									\
	.uuid = _uuid,							\
	.perm = BT_GATT_PERM_READ,					\
	.read = bt_gatt_attr_read_service,				\
	.user_data = _service,						\
}

/** @def BT_GATT_PRIMARY_SERVICE
 *  @brief Primary Service Declaration Macro.
 *
 *  Helper macro to declare a primary service attribute.
 *
 *  @param _service Service attribute value.
 */
#define BT_GATT_PRIMARY_SERVICE(_service)				\
{									\
	.uuid = BT_UUID_GATT_PRIMARY,					\
	.perm = BT_GATT_PERM_READ,					\
	.read = bt_gatt_attr_read_service,				\
	.user_data = _service,						\
}

/** @def BT_GATT_SECONDARY_SERVICE
 *  @brief Secondary Service Declaration Macro.
 *
 *  Helper macro to declare a secondary service attribute.
 *
 *  @param _service Service attribute value.
 */
#define BT_GATT_SECONDARY_SERVICE(_service)				\
{									\
	.uuid = BT_UUID_GATT_SECONDARY,					\
	.perm = BT_GATT_PERM_READ,					\
	.read = bt_gatt_attr_read_service,				\
	.user_data = _service,						\
}

/** @brief Read Include Attribute helper.
 *
 *  Read include service attribute value storing the result into buffer after
 *  enconding it.
 *  NOTE: Only use this with attributes which user_data is a bt_gatt_include.
 *
 *  @param conn Connection object.
 *  @param attr Attribute to read.
 *  @param buf Buffer to store the value read.
 *  @param len Buffer length.
 *  @param offset Start offset.
 *
 *  @return int number of bytes read in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_read_included(struct bt_conn *conn,
				   const struct bt_gatt_attr *attr,
				   void *buf, uint16_t len, uint16_t offset);

/** @def BT_GATT_INCLUDE_SERVICE
 *  @brief Include Service Declaration Macro.
 *
 *  Helper macro to declare a include service attribute.
 *
 *  @param _service Service attribute value.
 */
#define BT_GATT_INCLUDE_SERVICE(_service)				\
{									\
	.uuid = BT_UUID_GATT_INCLUDE,					\
	.perm = BT_GATT_PERM_READ,					\
	.read = bt_gatt_attr_read_included,				\
	.user_data = _service,						\
}

/** @brief Read Characteristic Attribute helper.
 *
 *  Read characteristic attribute value storing the result into buffer after
 *  enconding it.
 *  NOTE: Only use this with attributes which user_data is a bt_gatt_chrc.
 *
 *  @param conn Connection object.
 *  @param attr Attribute to read.
 *  @param buf Buffer to store the value read.
 *  @param len Buffer length.
 *  @param offset Start offset.
 *
 *  @return number of bytes read in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_read_chrc(struct bt_conn *conn,
			       const struct bt_gatt_attr *attr, void *buf,
			       uint16_t len, uint16_t offset);

/** @def BT_GATT_CHARACTERISTIC
 *  @brief Characteristic Declaration Macro.
 *
 *  Helper macro to declare a characteristic attribute.
 *
 *  @param _uuid Characteristic attribute uuid.
 *  @param _props Characteristic attribute properties.
 */
#define BT_GATT_CHARACTERISTIC(_uuid, _props)				\
{									\
	.uuid = BT_UUID_GATT_CHRC,					\
	.perm = BT_GATT_PERM_READ,					\
	.read = bt_gatt_attr_read_chrc,					\
	.user_data = (&(struct bt_gatt_chrc) { .uuid = _uuid,		\
					       .properties = _props, }),\
}

/** @brief GATT CCC configuration entry. */
struct bt_gatt_ccc_cfg {
	/** Config peer address. */
	bt_addr_le_t		peer;
	/** Config peer value. */
	uint16_t		value;
	/** Config valid flag. */
	uint8_t			valid;
};

/* Internal representation of CCC value */
struct _bt_gatt_ccc {
	struct bt_gatt_ccc_cfg	*cfg;
	size_t			cfg_len;
	uint16_t		value;
	void			(*cfg_changed)(uint16_t value);
};

/** @brief Read Client Characteristic Configuration Attribute helper.
 *
 *  Read CCC attribute value storing the result into buffer after
 *  enconding it.
 *  NOTE: Only use this with attributes which user_data is a _bt_gatt_ccc.
 *
 *  @param conn Connection object.
 *  @param attr Attribute to read.
 *  @param buf Buffer to store the value read.
 *  @param len Buffer length.
 *  @param offset Start offset.
 *
 *  @return number of bytes read in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_read_ccc(struct bt_conn *conn,
			      const struct bt_gatt_attr *attr, void *buf,
			      uint16_t len, uint16_t offset);

/** @brief Write Client Characteristic Configuration Attribute helper.
 *
 *  Write value in the buffer into CCC attribute.
 *  NOTE: Only use this with attributes which user_data is a _bt_gatt_ccc.
 *
 *  @param conn Connection object.
 *  @param attr Attribute to read.
 *  @param buf Buffer to store the value read.
 *  @param len Buffer length.
 *  @param offset Start offset.
 *
 *  @return number of bytes written in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_write_ccc(struct bt_conn *conn,
			       const struct bt_gatt_attr *attr, const void *buf,
			       uint16_t len, uint16_t offset);

/** @def BT_GATT_CCC
 *  @brief Client Characteristic Configuration Declaration Macro.
 *
 *  Helper macro to declare a CCC attribute.
 *
 *  @param _cfg Initial configuration.
 *  @param _cfg_changed Configuration changed callback.
 */
#define BT_GATT_CCC(_cfg, _cfg_changed)					\
{									\
	.uuid = BT_UUID_GATT_CCC,					\
	.perm = BT_GATT_PERM_READ | BT_GATT_PERM_WRITE,			\
	.read = bt_gatt_attr_read_ccc,					\
	.write = bt_gatt_attr_write_ccc,				\
	.user_data = (&(struct _bt_gatt_ccc) { .cfg = _cfg,		\
					       .cfg_len = ARRAY_SIZE(_cfg), \
					       .cfg_changed = _cfg_changed, }),\
}

/** @brief Read Characteristic Extended Properties Attribute helper
 *
 *  Read CEP attribute value storing the result into buffer after
 *  encoding it.
 *  NOTE: Only use this with attributes which user_data is a bt_gatt_cep.
 *
 *  @param conn Connection object
 *  @param attr Attribute to read
 *  @param buf Buffer to store the value read
 *  @param len Buffer length
 *  @param offset Start offset
 *
 *  @return number of bytes read in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_read_cep(struct bt_conn *conn,
			      const struct bt_gatt_attr *attr, void *buf,
			      uint16_t len, uint16_t offset);

/** @def BT_GATT_CEP
 *  @brief Characteristic Extended Properties Declaration Macro.
 *
 *  Helper macro to declare a CEP attribute.
 *
 *  @param _value Descriptor attribute value.
 */
#define BT_GATT_CEP(_value)						\
{									\
	.uuid = BT_UUID_GATT_CEP,					\
	.perm = BT_GATT_PERM_READ,					\
	.read = bt_gatt_attr_read_cep,					\
	.user_data = _value,						\
}

/** @brief Read Characteristic User Description Descriptor Attribute helper
 *
 *  Read CUD attribute value storing the result into buffer after
 *  encoding it.
 *  NOTE: Only use this with attributes which user_data is a NULL-terminated C string.
 *
 *  @param conn Connection object
 *  @param attr Attribute to read
 *  @param buf Buffer to store the value read
 *  @param len Buffer length
 *  @param offset Start offset
 *
 *  @return number of bytes read in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_read_cud(struct bt_conn *conn,
			      const struct bt_gatt_attr *attr, void *buf,
			      uint16_t len, uint16_t offset);

/** @def BT_GATT_CUD
 *  @brief Characteristic User Format Descriptor Declaration Macro.
 *
 *  Helper macro to declare a CUD attribute.
 *
 *  @param _value User description NULL-terminated C string.
 *  @param _perm Descriptor attribute access permissions.
 */
#define BT_GATT_CUD(_value, _perm)					\
{									\
	.uuid = BT_UUID_GATT_CUD,					\
	.perm = _perm,							\
	.read = bt_gatt_attr_read_cud,					\
	.user_data = _value,						\
}

/** @brief Read Characteristic Presentation format Descriptor Attribute helper
 *
 *  Read CPF attribute value storing the result into buffer after
 *  encoding it.
 *  NOTE: Only use this with attributes which user_data is a bt_gatt_pf.
 *
 *  @param conn Connection object
 *  @param attr Attribute to read
 *  @param buf Buffer to store the value read
 *  @param len Buffer length
 *  @param offset Start offset
 *
 *  @return number of bytes read in case of success or negative values in
 *  case of error.
 */
ssize_t bt_gatt_attr_read_cpf(struct bt_conn *conn,
			      const struct bt_gatt_attr *attr, void *buf,
			      uint16_t len, uint16_t offset);

/** @def BT_GATT_CPF
 *  @brief Characteristic Presentation Format Descriptor Declaration Macro.
 *
 *  Helper macro to declare a CPF attribute.
 *
 *  @param _value Descriptor attribute value.
 */
#define BT_GATT_CPF(_value)						\
{									\
	.uuid = BT_UUID_GATT_CPF,					\
	.perm = BT_GATT_PERM_READ,					\
	.read = bt_gatt_attr_read_cpf,					\
	.user_data = _value,						\
}

/** @def BT_GATT_DESCRIPTOR
 *  @brief Descriptor Declaration Macro.
 *
 *  Helper macro to declare a descriptor attribute.
 *
 *  @param _uuid Descriptor attribute uuid.
 *  @param _perm Descriptor attribute access permissions.
 *  @param _read Descriptor attribute read callback.
 *  @param _write Descriptor attribute write callback.
 *  @param _value Descriptor attribute value.
 */
#define BT_GATT_DESCRIPTOR(_uuid, _perm, _read, _write, _value)		\
{									\
	.uuid = _uuid,							\
	.perm = _perm,							\
	.read = _read,							\
	.write = _write,						\
	.user_data = _value,						\
}

/** @def BT_GATT_LONG_DESCRIPTOR
 *  @brief Descriptor Declaration Macro.
 *
 *  Helper macro to declare a descriptor attribute.
 *
 *  @param _uuid Descriptor attribute uuid.
 *  @param _perm Descriptor attribute access permissions.
 *  @param _read Descriptor attribute read callback.
 *  @param _write Descriptor attribute write callback.
 *  @param _flush Descriptor attribute flush callback.
 *  @param _value Descriptor attribute value.
 */
#define BT_GATT_LONG_DESCRIPTOR(_uuid, _perm, _read, _write, _flush, _value) \
{									\
	.uuid = _uuid,							\
	.perm = _perm,							\
	.read = _read,							\
	.write = _write,						\
	.flush = _flush,						\
	.user_data = _value,						\
}

/** @brief Notify attribute value change.
 *
 *  Send notification of attribute value change, if connection is NULL notify
 *  all peer that have notification enabled via CCC otherwise do a direct
 *  notification only the given connection.
 *
 *  @param conn Connection object.
 *  @param attr Attribute object.
 *  @param value Attribute value.
 *  @param len Attribute value length.
 */
int bt_gatt_notify(struct bt_conn *conn, const struct bt_gatt_attr *attr,
		   const void *data, uint16_t len);

#if defined(CONFIG_BLUETOOTH_GATT_CLIENT)
/* Client API */

/** @brief Response callback function
 *
 *  @param conn Connection object.
 *  @param err Error code.
 */
typedef void (*bt_gatt_rsp_func_t)(struct bt_conn *conn, uint8_t err);

/** @brief Exchange MTU
 *
 * This client procedure can be used to set the MTU to the maximum possible
 * size the buffers can hold.
 * NOTE: Shall only be used once per connection.
 *
 *  @param conn Connection object.
 *  @param func Exchange MTU Response callback function.
 */
int bt_gatt_exchange_mtu(struct bt_conn *conn, bt_gatt_rsp_func_t func);

struct bt_gatt_discover_params;

/** @brief Discover attribute callback function.
 *
 *  @param conn Connection object.
 *  @param attr Attribute found.
 *  @param params Discovery parameters given.
 *
 *  If discovery procedure has completed this callback will be called with
 *  attr set to NULL. This will not happen if procedure was stopped by returning
 *  BT_GATT_ITER_STOP.
 *
 *  @return BT_GATT_ITER_CONTINUE if should continue attribute discovery
 *  or BT_GATT_ITER_STOP to stop discovery procedure.
 */
typedef uint8_t (*bt_gatt_discover_func_t)(struct bt_conn *conn,
					   const struct bt_gatt_attr *attr,
					   struct bt_gatt_discover_params *params);

enum {
	BT_GATT_DISCOVER_PRIMARY,
	BT_GATT_DISCOVER_SECONDARY,
	BT_GATT_DISCOVER_INCLUDE,
	BT_GATT_DISCOVER_CHARACTERISTIC,
	BT_GATT_DISCOVER_DESCRIPTOR,
};

/** @brief GATT Discover Attributes parameters */
struct bt_gatt_discover_params {
	/** Discover UUID type */
	struct bt_uuid *uuid;
	/** Discover attribute callback */
	bt_gatt_discover_func_t func;
	/** Discover start handle */
	uint16_t start_handle;
	/** Discover end handle */
	uint16_t end_handle;
	/** Discover type */
	uint8_t type;
};

/** @brief GATT Discover function
 *
 *  This procedure is used by a client to discover attributes on a server.
 *
 *  Primary Service Discovery: Procedure allows to discover specific Primary
 *                             Service based on UUID.
 *  Include Service Discovery: Procedure allows to discover all Include Services
 *                             within specified range.
 *  Characteristic Discovery:  Procedure allows to discover all characteristics
 *                             within specified handle range as well as
 *                             discover characteristics with specified UUID.
 *  Descriptors Discovery:     Procedure allows to discover all characteristic
 *                             descriptors within specified range.
 *
 *  For each attribute found the callback is called which can then decide
 *  whether to continue discovering or stop.
 *
 *  Note: This procedure is asynchronous therefore the parameters need to
 *  remains valid while it is active.
 *
 *  @param conn Connection object.
 *  @param params Discover parameters.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_gatt_discover(struct bt_conn *conn,
		     struct bt_gatt_discover_params *params);

struct bt_gatt_read_params;

/** @brief Read callback function
 *
 *  @param conn Connection object.
 *  @param err Error code.
 *  @param params Read parameters used.
 *  @param data Attribute value data. NULL means read has completed.
 *  @param length Attribute value length.
 */
typedef uint8_t (*bt_gatt_read_func_t)(struct bt_conn *conn, int err,
				       struct bt_gatt_read_params *params,
				       const void *data, uint16_t length);

/** @brief GATT Read parameters */
struct bt_gatt_read_params {
	/** Read attribute callback */
	bt_gatt_read_func_t func;
	/** Handles count.
	 * If equals to 1 single.handle and single.offset are used.
	 * If >1 Read Multiple Characteristic Values is performed and handles
	 * are used.
	 */
	size_t handle_count;
	union {
		struct {
			/** Attribute handle */
			uint16_t handle;
			/** Attribute data offset */
			uint16_t offset;
		} single;
		/** Handles to read in Read Multiple Characteristic Values */
		uint16_t *handles;
	};
};

/** @brief Read Attribute Value by handle
 *
 *  This procedure read the attribute value and return it to the callback.
 *
 *  Note: This procedure is asynchronous therefore the parameters need to
 *  remains valid while it is active.
 *
 *  @param conn Connection object.
 *  @param params Read parameters.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_gatt_read(struct bt_conn *conn, struct bt_gatt_read_params *params);

/** @brief Write Attribute Value by handle
 *
 * This procedure write the attribute value and return the result in the
 * callback.
 *
 * @param conn Connection object.
 * @param handle Attribute handle.
 * @param offset Attribute data offset.
 * @param data Data to be written.
 * @param length Data length.
 * @param func Callback function.
 *
 * @return 0 in case of success or negative value in case of error.
 */
int bt_gatt_write(struct bt_conn *conn, uint16_t handle, uint16_t offset,
		  const void *data, uint16_t length, bt_gatt_rsp_func_t func);

/** @brief Write Attribute Value by handle without response
 *
 * This procedure write the attribute value without requiring an
 * acknowledgement that the write was successfully performed
 *
 * @param conn Connection object.
 * @param handle Attribute handle.
 * @param data Data to be written.
 * @param length Data length.
 * @param sign Whether to sign data
 *
 * @return 0 in case of success or negative value in case of error.
 */
int bt_gatt_write_without_response(struct bt_conn *conn, uint16_t handle,
				   const void *data, uint16_t length,
				   bool sign);

struct bt_gatt_subscribe_params;

/** @brief Notification callback function
 *
 *  @param conn Connection object.
 *  @param params Subscription parameters.
 *  @param data Attribute value data. If NULL then subscription was removed.
 *  @param length Attribute value length.
 */
typedef uint8_t (*bt_gatt_notify_func_t)(struct bt_conn *conn,
					 struct bt_gatt_subscribe_params *params,
					 const void *data, uint16_t length);

/** @brief GATT Subscribe parameters */
struct bt_gatt_subscribe_params {
	bt_addr_le_t _peer;
	/** Notification value callback */
	bt_gatt_notify_func_t notify;
	/** Subscribe value handle */
	uint16_t value_handle;
	/** Subscribe CCC handle */
	uint16_t ccc_handle;
	/** Subscribe value */
	uint16_t value;
	struct bt_gatt_subscribe_params *_next;
};

/** @brief Subscribe Attribute Value Notification
 *
 *  This procedure subscribe to value notification using the Client
 *  Characteristic Configuration handle.
 *  If notification received subscribe value callback is called to return
 *  notified value. One may then decide whether to unsubscribe directly from
 *  this callback. Notification callback with NULL data will not be called if
 *  subscription was removed by this method.
 *
 *  Note: This procedure is asynchronous therefore the parameters need to
 *  remains valid while it is active.
 *
 *  @param conn Connection object.
 *  @param params Subscribe parameters.
 *
 *  @return 0 in case of success or negative value in case of error.
 */
int bt_gatt_subscribe(struct bt_conn *conn,
		      struct bt_gatt_subscribe_params *params);

/** @brief Unsubscribe Attribute Value Notification
 *
 * This procedure unsubscribe to value notification using the Client
 * Characteristic Configuration handle. Notification callback with NULL data
 * will not be called if subscription was removed by this call.
 *
 * @param conn Connection object.
 * @param params Subscribe parameters.
 *
 * @return 0 in case of success or negative value in case of error.
 */
int bt_gatt_unsubscribe(struct bt_conn *conn,
			struct bt_gatt_subscribe_params *params);

/** @brief Cancel GATT pending request
 *
 *  @param conn Connection object.
 */
void bt_gatt_cancel(struct bt_conn *conn);

#endif /* CONFIG_BLUETOOTH_GATT_CLIENT */
#endif /* CONFIG_BLUETOOTH_CENTRAL || CONFIG_BLUETOOTH_PERIPHERAL */

#ifdef __cplusplus
}
#endif

#endif /* __BT_GATT_H */