/*
 * Copyright (c) 2017 Linaro Limited
 *
 * Based on nrf52840_pca10056.dts
 * modified 2018 Tavish Naruka <tavishnaruka@gmail.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>

/ {
	model = "Electronut Labs Blip";
	compatible = "nordic,pca10056-dk", "nordic,nrf52840-qiaa",
		     "nordic,nrf52840";

	chosen {
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,uart-mcumgr = &uart0;
		zephyr,bt-mon-uart = &uart0;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
	};

	leds {
		compatible = "gpio-leds";
		led0: led_0 {
			gpios = <&gpio0 13 GPIO_INT_ACTIVE_LOW>;
			label = "Green LED 0";
		};
		led1: led_1 {
			gpios = <&gpio0 14 GPIO_INT_ACTIVE_LOW>;
			label = "Red LED 1";
		};
		led2: led_2 {
			gpios = <&gpio0 15 GPIO_INT_ACTIVE_LOW>;
			label = "Blue LED 2";
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			gpios = <&gpio1 7 GPIO_PUD_PULL_UP>;
			label = "Push button switch 0";
		};
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		led0 = &led0;
		led1 = &led1;
		led2 = &led2;
		sw0 = &button0;
	};
};

&adc {
	status ="ok";
};

&gpiote {
	status ="ok";
};

&gpio0 {
	status ="ok";
};

&gpio1 {
	status ="ok";
};

&uart0 {
	compatible = "nordic,nrf-uart";
	current-speed = <115200>;
	status = "ok";
	tx-pin = <6>;
	rx-pin = <8>;
	rts-pin = <5>;
	cts-pin = <7>;
};

&i2c0 {
	status = "ok";
	sda-pin = <12>;
	scl-pin = <11>;
};

&i2c1 {
	/* Cannot be used together with spi1. */
	/* status = "ok"; */
	sda-pin = <2>;
	scl-pin = <3>;
};

&spi0 {
	/* Cannot be used together with i2c0. */
	/* status = "ok"; */
	sck-pin = <19>;
	mosi-pin = <20>;
	miso-pin = <21>;
};

&spi1 {
	status = "ok";
	sck-pin = <25>;
	mosi-pin = <34>;
	miso-pin = <24>;
};

&spi2 {
	status = "ok";
	sck-pin = <26>;
	mosi-pin = <23>;
	miso-pin = <27>;
};

&spi3 {
	status = "ok";
	sck-pin = <29>;
	mosi-pin = <30>;
	miso-pin = <31>;
};

&flash0 {
	/*
	 * For more information, see:
	 * http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions
	 */
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		boot_partition: partition@0 {
			label = "mcuboot";
			reg = <0x000000000 0x0000C000>;
		};
		slot0_partition: partition@c000 {
			label = "image-0";
			reg = <0x0000C000 0x000067000>;
		};
		slot1_partition: partition@73000 {
			label = "image-1";
			reg = <0x00073000 0x000067000>;
		};
		scratch_partition: partition@da000 {
			label = "image-scratch";
			reg = <0x000da000 0x0001e000>;
		};

		/*
		 * The flash starting at 0x000f8000 and ending at
		 * 0x000fffff is reserved for use by the application.
		 */

		/* Storage partition will be used by FCB/NFFS/NVS if enabled. */
		storage_partition: partition@f8000 {
			label = "storage";
			reg = <0x000f8000 0x00008000>;
		};
	};
};

&usbd {
	compatible = "nordic,nrf-usbd";
	status = "ok";
};