# Kconfig - Quark X1000 SoC configuration options

#
# Copyright (c) 2014-2015 Wind River Systems, Inc.
# Copyright (c) 2015-2016 Intel Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

if SOC_QUARK_X1000

config SOC
	default quark_x1000

config PHYS_LOAD_ADDR
	default 0x00100000

config PHYS_RAM_ADDR
       default 0x00400000

config RAM_SIZE
	default 32768

config ROM_SIZE
	default 1024 if XIP

config SYS_CLOCK_HW_CYCLES_PER_SEC
	default 25000000  if HPET_TIMER

config CLFLUSH_DETECT
	def_bool y if CACHE_FLUSHING

if SHARED_IRQ

config SHARED_IRQ_0
	def_bool y

if SHARED_IRQ_0

config SHARED_IRQ_0_NAME
	default "SHARED_IRQ0"
config SHARED_IRQ_0_IRQ
	default 18
config SHARED_IRQ_0_PRI
	default 2

endif # SHARED_IRQ_0

endif # SHARED_IRQ

if PCI_LEGACY_BRIDGE

config PCI_LEGACY_BRIDGE_BUS
	default 0
config PCI_LEGACY_BRIDGE_DEV
	default 31
config PCI_LEGACY_BRIDGE_VENDOR_ID
	default 0x8086
config PCI_LEGACY_BRIDGE_DEVICE_ID
	default 0x095e

endif # PCI_LEGACY_BRIDGE

if I2C

config I2C_CLOCK_SPEED
	default 25

config I2C_DW
        def_bool y

if I2C_DW

config I2C_DW_0
        def_bool y

if I2C_DW_0

config I2C_DW_0_NAME
        default "I2C0"
config I2C_DW_0_DEFAULT_CFG
        default 0x12
config I2C_DW_0_IRQ_PRI
	default 2
config I2C_DW_0_IRQ_SHARED_NAME
	default SHARED_IRQ_0_NAME if SHARED_IRQ

endif # I2C_DW_0

endif # I2C_DW

endif # I2C


if GPIO

config GPIO_SCH
	def_bool y

if GPIO_SCH

config GPIO_SCH_0
	def_bool y

config GPIO_SCH_1
	def_bool y

if GPIO_SCH_0

config GPIO_SCH_0_DEV_NAME
	default "GPIO_CW"

endif # GPIO_SCH_0

if GPIO_SCH_1

config GPIO_SCH_1_DEV_NAME
	default "GPIO_RW"

endif # GPIO_SCH_1

endif # GPIO_SCH

config GPIO_DW
	def_bool y

if GPIO_DW

config GPIO_DW_0
	def_bool y
	select GPIO_DW_0_IRQ_SHARED if SHARED_IRQ

if GPIO_DW_0

config GPIO_DW_0_NAME
	default "GPIO_0"
config GPIO_DW_0_BUS
	default 0
config GPIO_DW_0_DEV
	default 21
config GPIO_DW_0_FUNCTION
	default 2
config GPIO_DW_0_BAR
	default 1
config GPIO_DW_0_BITS
	default 8
config GPIO_DW_0_BASE_ADDR
	default 0x90006000
config GPIO_DW_0_IRQ
	default 18
config GPIO_DW_0_PRI
	default 2
config GPIO_DW_0_IRQ_SHARED_NAME
	default SHARED_IRQ_0_NAME if SHARED_IRQ

endif # GPIO_DW_0

endif # GPIO_DW

endif # GPIO


if SPI

config SPI_INTEL
	def_bool y

if SPI_INTEL

config SPI_INTEL_CS_GPIO
	def_bool y

config SPI_INTEL_PORT_0
	def_bool y

if SPI_INTEL_PORT_0

config SPI_INTEL_PORT_0_DRV_NAME
	default "SPI0"
config SPI_INTEL_PORT_0_BUS
	default 0
config SPI_INTEL_PORT_0_DEV
	default 21
config SPI_INTEL_PORT_0_FUNCTION
	default 0
config SPI_INTEL_PORT_0_REGS
	default 0x90009000
config SPI_INTEL_PORT_0_IRQ
	default 16
config SPI_INTEL_PORT_0_PRI
	default 2
config SPI_INTEL_PORT_0_CS_GPIO_PORT
	default GPIO_DW_0_NAME
config SPI_INTEL_PORT_0_CS_GPIO_PIN
	default 0

endif # SPI_INTEL_PORT_0

config SPI_INTEL_PORT_1
	def_bool n

if SPI_INTEL_PORT_1

config SPI_INTEL_PORT_1_DRV_NAME
	default "SPI1"
config SPI_INTEL_PORT_1_BUS
	default 0
config SPI_INTEL_PORT_1_DEV
	default 21
config SPI_INTEL_PORT_1_FUNCTION
	default 1
config SPI_INTEL_PORT_1_REGS
	default 0x90008000
config SPI_INTEL_PORT_1_IRQ
	default 17
config SPI_INTEL_PORT_1_PRI
	default 2
config SPI_INTEL_PORT_1_CS_GPIO_PORT
	default GPIO_DW_0_NAME
config SPI_INTEL_PORT_1_CS_GPIO_PIN
	default 2

endif # SPI_INTEL_PORT_1

endif # SPI_INTEL

endif # SPI

if UART_NS16550

config UART_NS16550_PCI
	def_bool y if PCI

config UART_NS16550_PORT_0
	def_bool y

if UART_NS16550_PORT_0

config UART_NS16550_PORT_0_NAME
	default "UART_0"
config UART_NS16550_PORT_0_IRQ_PRI
	default 0
config UART_NS16550_PORT_0_BAUD_RATE
	default 115200
config UART_NS16550_PORT_0_OPTIONS
	default 0
config UART_NS16550_PORT_0_PCI
	def_bool y if UART_NS16550_PCI

endif # UART_NS16550_PORT_0

config UART_NS16550_PORT_1
	def_bool y if PCI

if UART_NS16550_PORT_1

config UART_NS16550_PORT_1_NAME
	default "UART_1"
config UART_NS16550_PORT_1_IRQ_PRI
	default 3
config UART_NS16550_PORT_1_BAUD_RATE
	default 115200
config UART_NS16550_PORT_1_OPTIONS
	default 0
config UART_NS16550_PORT_1_PCI
	def_bool y if UART_NS16550_PCI

endif # UART_NS16550_PORT_1

endif # UART_NS16550


if ETH_DW

config ETH_DW_0
	def_bool y

if ETH_DW_0

config ETH_DW_0_BASE_ADDR
	default 0x90002000
config ETH_DW_0_IRQ
	default 18
config ETH_DW_0_IRQ_SHARED_NAME
	default SHARED_IRQ_0_NAME if SHARED_IRQ

endif # ETH_DW_0

endif # ETH_DW

# Pin multiplexer uses PCAL9535A, needs to be initialized after it
config PINMUX_INIT_PRIORITY
	default 80 if PINMUX

if UART_CONSOLE

config UART_CONSOLE_ON_DEV_NAME
	default "UART_1"

endif

if BLUETOOTH_UART

config BLUETOOTH_UART_ON_DEV_NAME
	default "UART_1"

endif

endif # SOC_QUARK_X1000