#!/bin/bash

if [ -z ${ZEPHYR_SDK_INSTALL_DIR} ];
then
    echo "ZEPHYR_SDK_INSTALL_DIR is not set.  Unable to continue"
    exit 1
fi

OPENOCD_ROOT=$ZEPHYR_SDK_INSTALL_DIR/sysroots/i686-pokysdk-linux/usr/
OPENOCD=$OPENOCD_ROOT/bin/openocd
OPENOCD_SCRIPT=$OPENOCD_ROOT/share/openocd/scripts

if [ $# -eq 1 ]; then
   if [ "$1" != "rom" ]; then
       echo "Unexpected command."
       echo "Only valid option is: rom"
       exit 1
   fi

echo "About to flash Zephyr comptaible ROM"

$OPENOCD -s ${OPENOCD_SCRIPT} \
         -f ${ZEPHYR_BASE}/boards/arduino_101/support/restore.cfg \
         -c 'init' \
         -c 'targets 1' \
         -c 'reset halt' \
         -c 'load_image quark_se_rom.bin 0xffffe000 bin' \
         -c 'verify_image quark_se_rom.bin 0xffffe000 bin' \
         -c 'reset run' \
         -c "shutdown"

else

if [ ! -r "A101_OS.bin" ]; then
    echo "Unable to find the A101_OS.bin file."
    exit 1
fi

if [ ! -r "A101_BOOT.bin" ]; then
    echo "Unable to find the A101_BOOT.bin file."
    exit 1
fi

echo "About to flash the OS and BOOT binaries"


# restore ROM one image, and ARC + x86 from another image
$OPENOCD -s ${OPENOCD_SCRIPT} \
         -f ${ZEPHYR_BASE}/boards/arduino_101/support/restore.cfg \
         -c 'init' \
         -c 'targets 1' \
         -c 'reset halt' \
         -c "load_image   A101_OS.bin 0x40000000 bin" \
         -c "verify_image A101_OS.bin 0x40000000 bin" \
         -c "load_image   A101_BOOT.bin 0xffffe000 bin" \
         -c "verify_image A101_BOOT.bin 0xffffe000 bin" \
         -c "shutdown"

fi

echo ""
echo "Flashing done"