.. _gerrit:

Working with Gerrit
###################


Follow these instructions to collaborate on the Zephyr Project through the
Gerrit review system.

Make sure to subscribe to the `mailing list`_ by filling out the
`registration form`_.

Follow the steps available at :ref:`code_check_out` for information about how
to access the source code using Git and Gerrit.

Gerrit assigns the following roles to users:

* **Submitters**: May submit changes for consideration, review other code
  changes, and make recommendations for acceptance or rejection by voting
  +1 or -1, respectively.
* **Maintainers**: May approve or reject changes based upon feedback from
  reviewers voting +2 or -2, respectively.
* **Builders**: May use the build automation infrastructure to verify the
  change.

A comprehensive walk-through of Gerrit is beyond the scope of this
document. There are plenty of resources available on the Internet. Good
summaries can be found here:

* `How to use Gerrit`_
* `Gerrit User Guide`_

Commit Message Formatting
*************************

When preparing to submit a change, each patch set will contain multiple edits
or modifications to files.  The patch set prefixed by a commit message detailing
all the changes.  The Zephyr Project has a few best practices for creating
commit messages to ease the acceptance of the change.

* Don't reference the patch itself.  For example, no "This patch..."

* The first line shall begin with the component being altered followed by a
  colon.  For example, doc:, i2c:, spi:, microkernel: , etc.  After the
  colon, a short (less than 70 characters) shall be provided after, detailing
  the brief basics of the change.  As an example:

  .. code-block:: console

     doc: Updating gerrit commit details

* When adding a new file to the tree, it is important to detail the source of
  origin on the file, provide attributions, and detail the intended usage.  In
  cases where the file is an original to Zephyr, the commit message shall
  include the following:

  .. code-block:: console

     Origin: Original

  In cases where the file is imported from an external project, the commit
  message shall contain details regarding the original project, the location
  of the project, the SHA-id of the origin commit the file, the intended
  purpose, and if the file will be maintained by the Zephyr project, in other
  words, whether or not the Zephyr project will contain a localized branch or
  if it is a downstream copy.

  For example a copy of a locally maintained import:

  .. code-block:: console

     Origin: Contiki OS
     URL: http://www.contiki-os.org/
     commit: 853207acfdc6549b10eb3e44504b1a75ae1ad63a
     Purpose: Introduction of networking stack.
     Maintained-by: Zephyr

  For example a copy of an externally maintained import:

  .. code-block:: console

     Origin: Tiny Crypt
     URL: https://github.com/01org/tinycrypt
     commit: 08ded7f21529c39e5133688ffb93a9d0c94e5c6e
     Purpose: Introduction of TinyCrypt
     Maintained-by: External


Submitting a Change
*******************

Currently, Gerrit is the only method to submit a change for review.

Before submitting, please ensure each commit follows :ref:`contributing_code`
guidelines. Directions for building the source code
are beyond the scope of this document. Please see the :ref:`getting_started`
for further detail.

When a change is ready for submission, Gerrit requires that the
change be pushed to a special branch. The name of this special branch
contains a reference to the final branch where the code should reside,
once accepted.

For the Zephyr Project, the special branch is called :literal:`refs/for/master` .

1. Push the current local development branch to the gerrit server, type:

   .. code-block:: bash

      $ git push origin HEAD:refs/for/master

   If the command executes correctly, the output should look similar to
   this:

   .. code-block:: bash

      Counting objects: 3, done.
      Writing objects: 100% (3/3), 306 bytes | 0 bytes/s, done.
      Total 3 (delta 0), reused 0 (delta 0)
      remote: Processing changes: new: 1, refs: 1, done
      remote:
      remote: New Changes:
      remote:   https://gerrit.zephyrproject.org/r/6 Test commit
      remote:
      To ssh://LFID@gerrit.zephyrproject.org:29418/zephyr
       * [new branch]      HEAD -> refs/for/master


   The gerrit server generates a link where the change can be tracked.

2. Add reviewers to your change.

   To specify a list of reviewers via the command line, add
   *%r=reviewer@project.org* to your push command. For example:

   .. code-block:: bash

      $ git push origin HEAD:refs/for/master%r=rev1@email.com,rv2@notemail.com

   Alternatively, you can auto-configure GIT to add a set of reviewers if your commits will
   have the same reviewers all at the time.

   To add a list of default reviewers, open the :file:`.git/config` file in the project
   directory and add the following line in the :literal:`[ branch “master” ]` section:

   .. code-block:: bash

      [branch "master"] #.... push =
      HEAD:refs/for/master%r=rev1@email.com,rev2@notemail.com`


   Make sure to use actual email addresses instead of the :literal:`@email.com and
   @notemail.com` addressses. Don't forget to replace :literal:`origin` with your git
   remote name.

Reviewing Using Gerrit
**********************

 An example of a gerrit change review page:

.. figure:: figures/gerrit01.png
   :scale: 75 %
   :alt: Gerrit Review Page

   An example of a Gerrit change review page.

   The fields highlighted in yellow are of interest and require a
   little more explanation.


* **Add**: This button allows the change submitter to manually add names of
  people who should review a change; start typing a name and the system
  will auto-complete based on the list of people registered and with
  access to the system. They will be notified by email that you are
  requesting their input.

* **Abandon**: This button is available to the submitter only; it allows a
  committer to abandon a change and remove it from the merge queue.

* **Change-ID**: This ID is generated by Gerrit (or system). It becomes
  useful when the review process determines that your commit(s) have to
  be amended. You may submit a new version; and if the same Change-ID
  header (and value) are present, Gerrit will remember it and present
  it as another version of the same change.

* **Status**: Currently, the example change is in review status, as indicated
  by “Needs Verified” in the upper-left corner. The list of
  Reviewers will all emit their opinion, voting +1 if they agree to the
  merge, -1 if they disagree. Gerrit users with a Maintainer role can
  agree to the merge or refuse it by voting +2 or -2 respectively.

Notifications are sent to the email address in your commit message's
Signed-off-by line. Visit your `gerrit dashboard`_, to check the progress
of your requests.

Click on a change and see a history tab similar to the one below:

.. figure:: figures/gerrit02.png
   :scale: 75 %
   :alt: Gerrit Feedback Page

   The history tab in Gerrit will show you the in-line comments and
   the author of the review.

Viewing Pending Changes
***********************

- Find all pending changes by clicking on the
  :menuselection:`All --> Changes` link in the upper-left corner, or
  directly at: `<https://gerrit.zephyrproject.org/r/#/q/project:zephyr>`_

  If you collaborate in multiple projects, you may wish to limit searching to
  the specific branch through the search bar in the upper-right side.

  Add the filter *project:zephyr* to limit the visible changes to
  only those from the Zephyr Project.

  .. figure:: figures/gerrit03.png
      :scale: 75 %
      :alt: Find pending changes for zephyr repo

      This is an example of a search for all changes of *project:zephyr*.

- List all current changes you submitted, or list just those changes in need
  of your input by clicking on :menuselection:`My --> Changes` or going to:
  `gerrit dashboard`_

  .. figure:: figures/gerrit04.png
     :scale: 75 %
     :alt: User gerrit dashboard

     View of Gerrit dashboard.

Reviewing a Change
******************

1. Click on a link for incoming or outgoing review, such as
   *“Add REAME file as test for submit”* shown in this figure:

   .. figure:: figures/gerrit05.png
      :scale: 75 %
      :alt: Incoming and Outgoing Reviews

      An example of incoming and outgoing items in review.

2. The details of the change and its current status are loaded:

   .. figure:: figures/gerrit06.png
      :scale: 75 %
      :alt: Detailed View of a Change in Gerrit

      An example of the detailed view of a change in Gerrit.

      The highlighted items require further explanation.

   From left to right:

   * **Status:** Displays the current status of the change. In the
     example below, the status reads: Needs Verified.

   * **Reply:** Click on this button after reviewing to add a final
     review message and a score, -1, 0 or +1.

   * **Patch Sets:** If multiple revisions of a patch exist, this button
     enables navigation among revisions to see the changes. By default,
     the most recent revision is presented.

   * **Download:** This button brings up another window with multiple
     options to download or checkout the current changeset. The button on
     the right copies the line to your clipboard. You can easily paste it
     into your git interface to work with the patch as you prefer.

   Underneath the commit information, the files that have been changed by
   this patch are displayed.

3. Click on a filename to review it. Select the code base to differentiate
   against. The default is :guilabel:`Base` and it will generally be
   what is needed.

   .. figure:: figures/gerrit07.png
      :scale: 50 %
      :alt: Code Base Location

      Shows the list of changed files.

4. The review page presents the changes made to the file. At the top of
   the review, the presentation shows some general navigation options.
   Navigate through the patch set using the arrows on the top
   right corner. It is possible to go to the previous or next file in the
   set or to return to the main change screen. Click on the yellow sticky
   pad to add comments to the whole file.

   .. figure:: figures/gerrit08.png
      :scale: 75 %
      :alt: Review Page Navigation

   The focus of the page is on the comparison window. The changes made
   are presented in green on the right versus the base version on the left.
   Double click to highlight the text within the actual change to provide
   feedback on a specific section of the code. Press *c* once the code is
   highlighted to add comments to that section.

5. After adding the comment, it is saved as a *Draft*.

   .. figure:: figures/gerrit09.png
      :scale: 75 %
      :alt: Saved Comment as Draft

      Shows a comment saved as a draft.

6. Once you have reviewed all files and provided feedback, click the
   *green up arrow* at the top right to return to the main change page. Click
   the :guilabel:`Reply` button, write some final comments, and submit your score for
   the patch set. Click :guilabel:`Post` to submit the review of each reviewed file, as
   well as your final comment and score. Gerrit sends an email to the
   change-submitter and all listed reviewers. Finally, it logs the review
   for future reference. All individual comments are saved as *Draft* until
   the :guilabel:`Post` button is clicked.

   .. figure:: figures/gerrit10.png
      :scale: 75 %
      :alt: Submitting the Final Comment and Review

      Shows the dialog box for submitting the final comment and the review
      score of a change.


.. _registration form: https://lists.zephyrproject.org/mailman3/lists/users.lists.zephyrproject.org/

.. _mailing list: users@lists.zephyrproject.org

.. _How to use Gerrit: https://wiki.iotivity.org/how_to_use_gerrit

.. _Gerrit User Guide: https://gerrit-review.googlesource.com/Documentation/intro-user.html

.. _gerrit dashboard: https://gerrit.zephyrproject.org/r/#/dashboard/self