//*****************************************************************************
//
//  Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
//  Redistribution and use in source and binary forms, with or without
//  modification, are permitted provided that the following conditions
//  are met:
//
//    Redistributions of source code must retain the above copyright
//    notice, this list of conditions and the following disclaimer.
//
//    Redistributions in binary form must reproduce the above copyright
//    notice, this list of conditions and the following disclaimer in the
//    documentation and/or other materials provided with the
//    distribution.
//
//    Neither the name of Texas Instruments Incorporated nor the names of
//    its contributors may be used to endorse or promote products derived
//    from this software without specific prior written permission.
//
//  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
//  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
//  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
//  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
//  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
//  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
//  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
//  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
//  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
//  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
//  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************

#ifndef __HW_WDT_H__
#define __HW_WDT_H__

//*****************************************************************************
//
// The following are defines for the WDT register offsets.
//
//*****************************************************************************
#define WDT_O_LOAD              0x00000000
#define WDT_O_VALUE             0x00000004
#define WDT_O_CTL               0x00000008
#define WDT_O_ICR               0x0000000C
#define WDT_O_RIS               0x00000010
#define WDT_O_MIS               0x00000014
#define WDT_O_TEST              0x00000418
#define WDT_O_LOCK              0x00000C00


//******************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOAD register.
//
//******************************************************************************
#define WDT_LOAD_M            0xFFFFFFFF  // Watchdog Load Value
#define WDT_LOAD_S            0
//******************************************************************************
//
// The following are defines for the bit fields in the WDT_O_VALUE register.
//
//******************************************************************************
#define WDT_VALUE_M           0xFFFFFFFF  // Watchdog Value
#define WDT_VALUE_S           0
//******************************************************************************
//
// The following are defines for the bit fields in the WDT_O_CTL register.
//
//******************************************************************************
#define WDT_CTL_WRC             0x80000000  // Write Complete
#define WDT_CTL_INTTYPE         0x00000004  // Watchdog Interrupt Type
#define WDT_CTL_RESEN           0x00000002  // Watchdog Reset Enable. This bit
                                            // is not used in cc3xx, WDOG shall
                                            // always generate RESET to system
                                            // irrespective of this bit setting.
#define WDT_CTL_INTEN           0x00000001  // Watchdog Interrupt Enable
//******************************************************************************
//
// The following are defines for the bit fields in the WDT_O_ICR register.
//
//******************************************************************************
#define WDT_ICR_M             0xFFFFFFFF  // Watchdog Interrupt Clear
#define WDT_ICR_S             0
//******************************************************************************
//
// The following are defines for the bit fields in the WDT_O_RIS register.
//
//******************************************************************************
#define WDT_RIS_WDTRIS          0x00000001  // Watchdog Raw Interrupt Status
//******************************************************************************
//
// The following are defines for the bit fields in the WDT_O_MIS register.
//
//******************************************************************************
#define WDT_MIS_WDTMIS          0x00000001  // Watchdog Masked Interrupt Status
//******************************************************************************
//
// The following are defines for the bit fields in the WDT_O_TEST register.
//
//******************************************************************************
#define WDT_TEST_STALL_EN_M     0x00000C00  // Watchdog stall enable
#define WDT_TEST_STALL_EN_S     10
#define WDT_TEST_STALL          0x00000100  // Watchdog Stall Enable
//******************************************************************************
//
// The following are defines for the bit fields in the WDT_O_LOCK register.
//
//******************************************************************************
#define WDT_LOCK_M            0xFFFFFFFF  // Watchdog Lock
#define WDT_LOCK_S            0
#define WDT_LOCK_UNLOCKED     0x00000000  // Unlocked
#define WDT_LOCK_LOCKED       0x00000001  // Locked
#define WDT_LOCK_UNLOCK       0x1ACCE551  // Unlocks the watchdog timer

//*****************************************************************************
//
// The following are defines for the bit fields in the WDT_ISR, WDT_RIS, and
// WDT_MIS registers.
//
//*****************************************************************************
#define WDT_INT_TIMEOUT         0x00000001  // Watchdog timer expired


#endif // __HW_WDT_H__