/*
 * Copyright (c) 2018 STMicroelectronics
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr.h>
#include <device.h>
#include <drivers/sensor.h>
#include <stdio.h>
#include <sys/util.h>

void main(void)
{
	struct sensor_value temp1, temp2, hum, press;
	struct sensor_value accel1[3], accel2[3];
	struct sensor_value gyro[3];
	struct sensor_value magn[3];
	struct device *hts221 = device_get_binding(DT_INST_0_ST_HTS221_LABEL);
	struct device *lps22hb = device_get_binding(DT_INST_0_ST_LPS22HB_PRESS_LABEL);
	struct device *lsm6dsl = device_get_binding(DT_INST_0_ST_LSM6DSL_LABEL);
	struct device *lsm303agr_a = device_get_binding(DT_INST_0_ST_LIS2DH_LABEL);
	struct device *lsm303agr_m = device_get_binding(DT_INST_0_ST_LIS2MDL_MAGN_LABEL);

	if (hts221 == NULL) {
		printf("Could not get HTS221 device\n");
		return;
	}
	if (lps22hb == NULL) {
		printf("Could not get LPS22HB device\n");
		return;
	}
	if (lsm6dsl == NULL) {
		printf("Could not get LSM6DSL device\n");
		return;
	}
	if (lsm303agr_a == NULL) {
		printf("Could not get LSM303AGR Accel device\n");
		return;
	}
	if (lsm303agr_m == NULL) {
		printf("Could not get LSM303AGR Magn device\n");
		return;
	}

	/* set LSM6DSL accel/gyro sampling frequency to 104 Hz */
	struct sensor_value odr_attr;

	odr_attr.val1 = 104;
	odr_attr.val2 = 0;

	if (sensor_attr_set(lsm6dsl, SENSOR_CHAN_ACCEL_XYZ,
			    SENSOR_ATTR_SAMPLING_FREQUENCY, &odr_attr) < 0) {
		printk("Cannot set sampling frequency for accelerometer.\n");
		return;
	}

	if (sensor_attr_set(lsm6dsl, SENSOR_CHAN_GYRO_XYZ,
			    SENSOR_ATTR_SAMPLING_FREQUENCY, &odr_attr) < 0) {
		printk("Cannot set sampling frequency for gyro.\n");
		return;
	}

	while (1) {
		int ret;

		/* Get sensor samples */

		if (sensor_sample_fetch(hts221) < 0) {
			printf("HTS221 Sensor sample update error\n");
			return;
		}
		if (sensor_sample_fetch(lps22hb) < 0) {
			printf("LPS22HB Sensor sample update error\n");
			return;
		}
		if (sensor_sample_fetch(lsm6dsl) < 0) {
			printf("LSM6DSL Sensor sample update error\n");
			return;
		}
		ret = sensor_sample_fetch(lsm303agr_a);
		if (ret < 0 && ret != -EBADMSG) {
			printf("LSM303AGR Accel Sensor sample update error\n");
			return;
		}
		if (sensor_sample_fetch(lsm303agr_m) < 0) {
			printf("LSM303AGR Magn Sensor sample update error\n");
			return;
		}

		/* Get sensor data */

		sensor_channel_get(hts221, SENSOR_CHAN_AMBIENT_TEMP, &temp1);
		sensor_channel_get(hts221, SENSOR_CHAN_HUMIDITY, &hum);
		sensor_channel_get(lps22hb, SENSOR_CHAN_PRESS, &press);
		sensor_channel_get(lps22hb, SENSOR_CHAN_AMBIENT_TEMP, &temp2);
		sensor_channel_get(lsm6dsl, SENSOR_CHAN_ACCEL_XYZ, accel1);
		sensor_channel_get(lsm6dsl, SENSOR_CHAN_GYRO_XYZ, gyro);
		sensor_channel_get(lsm303agr_a, SENSOR_CHAN_ACCEL_XYZ, accel2);
		sensor_channel_get(lsm303agr_m, SENSOR_CHAN_MAGN_XYZ, magn);

		/* Display sensor data */

		/* Erase previous */
		printf("\0033\014");

		printf("X-NUCLEO-IKS01A2 sensor dashboard\n\n");

		/* temperature */
		printf("HTS221: Temperature: %.1f C\n",
		       sensor_value_to_double(&temp1));

		/* humidity */
		printf("HTS221: Relative Humidity: %.1f%%\n",
		       sensor_value_to_double(&hum));

		/* pressure */
		printf("LPS22HB: Pressure:%.3f kpa\n",
		       sensor_value_to_double(&press));

		/* lps22hb temperature */
		printf("LPS22HB: Temperature: %.1f C\n",
		       sensor_value_to_double(&temp2));

		/* lsm6dsl accel */
		printf("LSM6DSL: Accel (m.s-2): x: %.1f, y: %.1f, z: %.1f\n",
		       sensor_value_to_double(&accel1[0]),
		       sensor_value_to_double(&accel1[1]),
		       sensor_value_to_double(&accel1[2]));

		/* lsm6dsl gyro */
		printf("LSM6DSL: Gyro (dps): x: %.3f, y: %.3f, z: %.3f\n",
		       sensor_value_to_double(&gyro[0]),
		       sensor_value_to_double(&gyro[1]),
		       sensor_value_to_double(&gyro[2]));

		/* lsm303agr accel */
		printf("LSM303AGR: Accel (m.s-2): x: %.1f, y: %.1f, z: %.1f\n",
		       sensor_value_to_double(&accel2[0]),
		       sensor_value_to_double(&accel2[1]),
		       sensor_value_to_double(&accel2[2]));

		/* lsm303agr magn */
		printf("LSM303AGR: Magn (gauss): x: %.3f, y: %.3f, z: %.3f\n",
		       sensor_value_to_double(&magn[0]),
		       sensor_value_to_double(&magn[1]),
		       sensor_value_to_double(&magn[2]));

		k_sleep(2000);
	}
}