# SPDX-License-Identifier: Apache-2.0

CONFIG_SOC_SERIES_STM32L5X=y
CONFIG_SOC_STM32L552XX=y
# 110MHz system clock
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=110000000

# enable uart driver
CONFIG_SERIAL=y

# enable pinmux
CONFIG_PINMUX=y

# enable GPIO
CONFIG_GPIO=y

# clock configuration
CONFIG_CLOCK_CONTROL=y
# SYSCLK selection
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
# PLL configuration
CONFIG_CLOCK_STM32_PLL_SRC_MSI=y
CONFIG_CLOCK_STM32_MSI_RANGE=6
#CONFIG_CLOCK_STM32_LSE=y
#CONFIG_CLOCK_STM32_MSI_PLL_MODE=y
# produce 110MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=1
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=55
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=7
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_R_DIVISOR=2
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=1
CONFIG_CLOCK_STM32_APB2_PRESCALER=1

# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# Enable MPU
# Issue #27809
# TFM integration sample tfm_ipc doesn't work when the MPU is enabled.
# In TF-M, for the nucleo_l552ze_q, TFM_BOOT_MPU_PROTECTION configures and
# enables a secure MPU and a non secure MPU. Either CONFIG_ARM_MPU or
# TFM_BOOT_MPU_PROTECTION must be disabled.
#CONFIG_ARM_MPU=y

CONFIG_ARM_TRUSTZONE_M=y
CONFIG_CORTEX_M_SYSTICK=y
CONFIG_RUNTIME_NMI=y
CONFIG_TRUSTED_EXECUTION_NONSECURE=y
# Flash configuration for TFM
CONFIG_FLASH_LOAD_OFFSET=0x51000
CONFIG_FLASH_LOAD_SIZE=0x2E400