# Copyright (c) 2020 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0

description: |
    Nordic nRF family RADIO

    dfegpio[n]-gpios properties provide GPIO pins to the radio peripheral. These
    GPIO pins are used to drive antennas switching by Radio Direction Finding
    Extension. E.g. to use 12 antennas 4 GPIO pins must be provided;
    4 GPIO pins support switching up to 16 antennas.

    The dfegpio[n] properties are used to initialize the PSEL.DFEGPIO[n]
    registers. None of the dfegpio[n]-gpios properties are marked required,
    since which Radio PSEL.DFEGPIO[n] registers will be used to drive antenna
    switches depends on the use case.

    Nevertheless, at least two antennas must be available. That means at
    least one dfegpio[n]-gpios property must be provided, to give the radio
    the possibility to switch between two antennas.

compatible: "nordic,nrf-radio"

include: [base.yaml]

properties:
    reg:
      required: true

    interrupts:
      required: true

    dfe-ant-num:
      type: int
      required: true
      description: |
        Number of available antennas.

        Value zero means no antenna available. If provided value different than
        zero, it must be greater or equal to two.

    dfegpio0-gpios:
      type: phandle-array
      required: false
      description: |
        Pin select for DFE pin 0

        Flags cell in the property is not used for GPIO pin initialization
        and should be set to zero.

    dfegpio1-gpios:
      type: phandle-array
      required: false
      description: |
        Pin select for DFE pin 1

        Flags cell in the property is not used for GPIO pin initialization
        and should be set to zero.

    dfegpio2-gpios:
      type: phandle-array
      required: false
      description: |
        Pin select for DFE pin 2

        Flags cell in the property is not used for GPIO pin initialization
        and should be set to zero.

    dfegpio3-gpios:
      type: phandle-array
      required: false
      description: |
        Pin select for DFE pin 3

        Flags cell in the property is not used for GPIO pin initialization
        and should be set to zero.

    dfegpio4-gpios:
      type: phandle-array
      required: false
      description: |
        Pin select for DFE pin 4

        Flags cell in the property is not used for GPIO pin initialization
        and should be set to zero.

    dfegpio5-gpios:
      type: phandle-array
      required: false
      description: |
        Pin select for DFE pin 5

        Flags cell in the property is not used for GPIO pin initialization
        and should be set to zero.

    dfegpio6-gpios:
      type: phandle-array
      required: false
      description: |
        Pin select for DFE pin 6

        Flags cell in the property is not used for GPIO pin initialization
        and should be set to zero.

    dfegpio7-gpios:
      type: phandle-array
      required: false
      description: |
        Pin select for DFE pin 7

        Flags cell in the property is not used for GPIO pin initialization
        and should be set to zero.