/*
 * Copyright (c) 2020, Linaro Ltd.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Application overlay for testing driver builds
 *
 * Names in this file should be chosen in a way that won't conflict
 * with real-world devicetree nodes, to allow these tests to run on
 * (and be extended to test) real hardware.
 */

/ {
	test {
		#address-cells = <1>;
		#size-cells = <1>;

		test_gpio: gpio@deadbeef {
			compatible = "vnd,gpio";
			gpio-controller;
			reg = <0xdeadbeef 0x1000>;
			#gpio-cells = <0x2>;
			label = "TEST_GPIO_1";
			status = "okay";

			#include "gpio.dtsi"
		};

		test_i2c: i2c@11112222 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "vnd,i2c";
			reg = <0x11112222 0x1000>;
			label = "TEST_I2C_CTLR";
			status = "okay";
			clock-frequency = <100000>;

			#include "i2c.dtsi"
		};

		test_spi: spi@33334444 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "vnd,spi";
			reg = <0x33334444 0x1000>;
			label = "TEST_SPI_CTLR";
			status = "okay";
			clock-frequency = <2000000>;

			/* one entry for every devices at spi.dtsi */
			cs-gpios = <&test_gpio 0 0>,	/* 0x00 */
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,	/* 0x10 */
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,	/* 0x20 */
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,	/* 0x30 */
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>,
				   <&test_gpio 0 0>;	/* 0x40 */

			#include "spi.dtsi"
		};

		test_uart: uart@55556666 {
			compatible = "vnd,serial";
			reg = <0x55556666 0x1000>;
			label = "TEST_UART_CTLR";
			status = "okay";

			#include "uart.dtsi"
		};

		#include "led.dtsi"

		dht22 {
			compatible = "aosong,dht";
			status = "okay";
			label = "DHT22";
			dio-gpios = <&test_gpio 0 0>;
			/* dht22; */
		};
	};
};

/* Put device specific modifications to properties or disabling of devices
 * here to keep the bus specific dtsi files (i2c.dtsi, spi.dtsi, etc..)
 * pristine
 */

/* setup valid params for the device */
&test_i2c_at24 {
	reg = <0x8>;
	size = <32768>;
	pagesize = <64>;
	address-width = <16>;
	timeout = <5>;
};

/* disable device to conflict with i2c version */
&test_i2c_iis2dlpc {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_i2c_ism330dhcx {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_i2c_lis2dh {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_i2c_lis2ds12 {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_i2c_lis2dw12 {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_i2c_lis2mdl {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_i2c_lps22hh {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_i2c_lsm6dsl {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_i2c_lsm6dso {
	status = "disabled";
};

/* setup valid params for the device */
&test_spi_at25 {
	size = <32768>;
	pagesize = <64>;
	address-width = <16>;
	timeout = <5>;
};

/* disable device to conflict with i2c version */
&test_spi_bme280 {
	status = "disabled";
};

/* setup valid params for the device */
&test_spi_enc28j60 {
	local-mac-address = [00 00 00 00 00 00];
};

/* disable device to conflict with i2c version */
&test_spi_iis2iclx {
	status = "disabled";
};

/* disable device to conflict with i2c version */
&test_spi_iis2mdc {
	status = "disabled";
};

/* setup valid params for the device */
&test_spi_iis3dhhc {
	irq-gpios = <&test_gpio 0 0>, <&test_gpio 0 0>;
};

/* disable device to conflict with i2c version */
&test_spi_iis2dh {
	status = "disabled";
};