/*
 * Copyright (c) 2019, Kwon Tae-young <tykwon@m2i.co.kr>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <st/f4/stm32f415Rg.dtsi>
#include <st/f4/stm32f415rgtx-pinctrl.dtsi>

/ {
	model = "Mikroe MINI-M4 for STM32 board";
	compatible = "mikroe,mini-m4-for-stm32";

	chosen {
		zephyr,console = &usart2;
		zephyr,shell-uart = &usart2;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,ccm = &ccm0;
	};

	leds {
		compatible = "gpio-leds";
		orange_led_1: led_1 {
			gpios = <&gpioc 12 GPIO_ACTIVE_HIGH>;
			label = "DATA LD1";
		};
		red_led_2: led_2 {
			gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
			label = "STAT LD2";
		};
	};

	aliases {
		led0 = &orange_led_1;
		led1 = &red_led_2;
	};
};

&clk_hse {
	clock-frequency = <DT_FREQ_M(16)>;
	status = "okay";
};

&pll {
	div-m = <16>;
	mul-n = <336>;
	div-p = <2>;
	div-q = <7>;
	clocks = <&clk_hse>;
	status = "okay";
};

&rcc {
	clocks = <&pll>;
	clock-frequency = <DT_FREQ_M(168)>;
	ahb-prescaler = <1>;
	apb1-prescaler = <4>;
	apb2-prescaler = <2>;
};

&usart2 {
	pinctrl-0 = <&usart2_tx_pa2 &usart2_rx_pa3>;
	current-speed = <115200>;
	status = "okay";
};

&i2c2 {
	pinctrl-0 = <&i2c2_scl_pb10 &i2c2_sda_pb11>;
	status = "okay";
};

&spi1 {
	pinctrl-0 = <&spi1_nss_pa4 &spi1_sck_pa5
		     &spi1_miso_pa6 &spi1_mosi_pa7>;
	status = "okay";
};

&timers3 {
	status = "okay";

	pwm3: pwm {
		status = "okay";
		pinctrl-0 = <&tim3_ch1_pb4>;
	};
};

&usbotg_fs {
	pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>;
	status = "okay";
};

&cryp {
	status = "okay";
};