/*
 * Copyright 2023 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <arm/nxp/nxp_s32k344_m7.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/input/input-event-codes.h>
#include <freq.h>
#include <dt-bindings/pwm/pwm.h>
#include "mr_canhubk3-pinctrl.dtsi"

/ {
	model = "NXP MR-CANHUBK3";
	compatible = "nxp,mr_canhubk3";

	chosen {
		zephyr,sram = &sram0_1;
		zephyr,flash = &flash0;
		zephyr,itcm = &itcm;
		zephyr,dtcm = &dtcm;
		zephyr,code-partition = &code_partition;
		zephyr,console = &lpuart2;
		zephyr,shell-uart = &lpuart2;
		zephyr,flash-controller = &mx25l6433f;
		zephyr,canbus = &flexcan0;
	};

	aliases {
		dma0 = &edma0;
		led0 = &user_led1_red;
		led1 = &user_led1_green;
		led2 = &user_led1_blue;
		sw0 = &user_button_1;
		sw1 = &user_button_2;
		watchdog0 = &fs26_wdt;
		/* For pwm test suites */
		pwm-0 = &emios0_pwm;
		red-pwm-led = &user_led1_red_pwm;
		green-pwm-led = &user_led1_green_pwm;
		blue-pwm-led = &user_led1_blue_pwm;
		pwm-led0 = &user_led1_blue_pwm;
	};

	leds {
		compatible = "gpio-leds";
		user_led1_green: user_led1_green {
			gpios = <&gpioa_h 11 GPIO_ACTIVE_LOW>;
			label = "User RGB LED1 GREEN";
		};
		user_led1_blue: user_led1_blue {
			gpios = <&gpioe_l 12 GPIO_ACTIVE_LOW>;
			label = "User RGB LED1 BLUE";
		};
		user_led1_red: user_led1_red {
			gpios = <&gpioe_l 14 GPIO_ACTIVE_LOW>;
			label = "User RGB LED1 RED";
		};
	};

	/* gpio-leds and pwm-leds are the same RGB LED and cannot be used at the same time. */
	pwmleds {
		compatible = "pwm-leds";

		user_led1_blue_pwm: user_led1_blue {
			pwms = <&emios1_pwm 5 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
		};

		user_led1_green_pwm: user_led1_green {
			pwms = <&emios1_pwm 10 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
		};

		user_led1_red_pwm: user_led1_red {
			pwms = <&emios0_pwm 19 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button_1: button_0 {
			label = "User SW1";
			gpios = <&gpiod_l 15 GPIO_ACTIVE_HIGH>;
			zephyr,code = <INPUT_KEY_0>;
		};
		user_button_2: button_1 {
			label = "User SW2";
			gpios = <&gpioa_h 9 GPIO_ACTIVE_HIGH>;
			zephyr,code = <INPUT_KEY_1>;
		};
	};

	can_phy0: can-phy0 {
		compatible = "nxp,tja1443", "can-transceiver-gpio";
		enable-gpios = <&gpioc_h 8 GPIO_ACTIVE_HIGH>;
		standby-gpios = <&gpioc_h 5 GPIO_ACTIVE_LOW>;
		max-bitrate = <5000000>;
		#phy-cells = <0>;
	};

	can_phy1: can-phy1 {
		compatible = "nxp,tja1443", "can-transceiver-gpio";
		enable-gpios = <&gpiod_l 2 GPIO_ACTIVE_HIGH>;
		standby-gpios = <&gpiod_h 7 GPIO_ACTIVE_LOW>;
		max-bitrate = <5000000>;
		#phy-cells = <0>;
	};

	can_phy2: can-phy2 {
		compatible = "nxp,tja1463", "can-transceiver-gpio";
		enable-gpios = <&gpiod_l 4 GPIO_ACTIVE_HIGH>;
		standby-gpios = <&gpiod_h 6 GPIO_ACTIVE_LOW>;
		max-bitrate = <8000000>;
		#phy-cells = <0>;
	};

	can_phy3: can-phy3 {
		compatible = "nxp,tja1463", "can-transceiver-gpio";
		enable-gpios = <&gpiob_l 0 GPIO_ACTIVE_HIGH>;
		standby-gpios = <&gpiob_l 1 GPIO_ACTIVE_LOW>;
		max-bitrate = <8000000>;
		#phy-cells = <0>;
	};

	can_phy4: can-phy4 {
		compatible = "nxp,tja1153", "can-transceiver-gpio";
		enable-gpios = <&gpioc_h 10 GPIO_ACTIVE_HIGH>;
		standby-gpios = <&gpioc_h 9 GPIO_ACTIVE_LOW>;
		max-bitrate = <2000000>;
		#phy-cells = <0>;
	};

	can_phy5: can-phy5 {
		compatible = "nxp,tja1153", "can-transceiver-gpio";
		enable-gpios = <&gpioe_h 1 GPIO_ACTIVE_HIGH>;
		standby-gpios = <&gpiod_h 14 GPIO_ACTIVE_LOW>;
		max-bitrate = <2000000>;
		#phy-cells = <0>;
	};
};

&flash0 {
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		ivt_header: partition@0 {
			label = "ivt-header";
			reg = <0x00000000 0x100>;
		};

		code_partition: partition@100 {
			label = "code-partition";
			reg = <0x00000100 (DT_SIZE_K(4048) - 0x100)>;
		};
	};
};

&gpioa_h {
	status = "okay";
};

&gpioe_l {
	status = "okay";
};

/* Enable gpio to control the CAN transceivers */

&gpioc_h {
	status = "okay";
};

&gpiod_l {
	status = "okay";
};

&gpiod_h {
	status = "okay";
};

&gpiob_l {
	status = "okay";
};

&gpioe_h {
	status = "okay";
};

&eirq0 {
	pinctrl-0 = <&eirq0_default>;
	pinctrl-names = "default";
	status = "okay";
};

&lpuart0 {
	pinctrl-0 = <&lpuart0_default>;
	pinctrl-names = "default";
	dmas = <&edma0 0 37>, <&edma0 1 38>;
	dma-names = "tx", "rx";
};

&lpuart1 {
	pinctrl-0 = <&lpuart1_default>;
	pinctrl-names = "default";
	dmas = <&edma0 2 39>, <&edma0 3 40>;
	dma-names = "tx", "rx";
};

&lpuart2 {
	pinctrl-0 = <&lpuart2_default>;
	pinctrl-names = "default";
	current-speed = <115200>;
	dmas = <&edma0 16 38>, <&edma0 17 39>;
	dma-names = "tx", "rx";
	status = "okay";
};

&lpuart9 {
	pinctrl-0 = <&lpuart9_default>;
	pinctrl-names = "default";
	/*
	 * LPUART 1 and 9 share the same DMA source for TX
	 * and RX, using UART async API for both instances
	 * should be careful.
	 */
	dmas = <&edma0 4 39>, <&edma0 5 40>;
	dma-names = "tx", "rx";
};

&lpuart10 {
	pinctrl-0 = <&lpuart10_default>;
	pinctrl-names = "default";
	/*
	 * LPUART 2 and 10 share the same DMA source for TX
	 * and RX, using UART async API for both instances
	 * should be careful.
	 */
	dmas = <&edma0 18 38>, <&edma0 19 39>;
	dma-names = "tx", "rx";
};

&lpuart13 {
	pinctrl-0 = <&lpuart13_default>;
	pinctrl-names = "default";
	dmas = <&edma0 20 44>, <&edma0 21 45>;
	dma-names = "tx", "rx";
};

&lpuart14 {
	pinctrl-0 = <&lpuart14_default>;
	pinctrl-names = "default";
	dmas = <&edma0 22 46>, <&edma0 23 47>;
	dma-names = "tx", "rx";
};

&qspi0 {
	pinctrl-0 = <&qspi0_default>;
	pinctrl-names = "default";
	data-rate = "SDR";
	a-rx-clock-source = "LOOPBACK";
	a-dll-mode = "BYPASSED";
	ahb-buffers-masters = <0 1 2 3>;
	ahb-buffers-sizes = <0 0 0 256>;
	ahb-buffers-all-masters;
	status = "okay";

	mx25l6433f: mx25l6433f@0 {
		compatible = "nxp,s32-qspi-nor";
		reg = <0>;
		size = <DT_SIZE_M(64)>;
		jedec-id = [c2 20 17];
		quad-enable-requirements = "S1B6";
		readoc = "1-4-4";
		writeoc = "1-4-4";
		has-32k-erase;
		status = "okay";

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			storage_partition: partition@0 {
				label = "storage";
				reg = <0x0 0x100000>;
			};
		};
	};
};

&flexcan0 {
	pinctrl-0 = <&flexcan0_default>;
	pinctrl-names = "default";
	phys = <&can_phy0>;
	bus-speed = <125000>;
	sample-point = <875>;
	bus-speed-data = <1000000>;
	sample-point-data = <875>;
	status = "okay";
};

&flexcan1 {
	pinctrl-0 = <&flexcan1_default>;
	pinctrl-names = "default";
	phys = <&can_phy1>;
	bus-speed = <125000>;
	sample-point = <875>;
	bus-speed-data = <1000000>;
	sample-point-data = <875>;
};

&flexcan2 {
	pinctrl-0 = <&flexcan2_default>;
	pinctrl-names = "default";
	phys = <&can_phy2>;
	bus-speed = <125000>;
	sample-point = <875>;
	bus-speed-data = <1000000>;
	sample-point-data = <875>;
};

&flexcan3 {
	pinctrl-0 = <&flexcan3_default>;
	pinctrl-names = "default";
	phys = <&can_phy3>;
	bus-speed = <125000>;
	sample-point = <875>;
	bus-speed-data = <1000000>;
	sample-point-data = <875>;
};

&flexcan4 {
	pinctrl-0 = <&flexcan4_default>;
	pinctrl-names = "default";
	phys = <&can_phy4>;
	bus-speed = <125000>;
	sample-point = <875>;
	bus-speed-data = <1000000>;
	sample-point-data = <875>;
};

&flexcan5 {
	pinctrl-0 = <&flexcan5_default>;
	pinctrl-names = "default";
	phys = <&can_phy5>;
	bus-speed = <125000>;
	sample-point = <875>;
	bus-speed-data = <1000000>;
	sample-point-data = <875>;
};

&lpi2c0 {
	pinctrl-0 = <&lpi2c0_default>;
	pinctrl-names = "default";
	clock-frequency = <I2C_BITRATE_STANDARD>;
};

&lpi2c1 {
	pinctrl-0 = <&lpi2c1_default>;
	pinctrl-names = "default";
	clock-frequency = <I2C_BITRATE_STANDARD>;
};

&lpspi1 {
	pinctrl-0 = <&lpspi1_default>;
	pinctrl-names = "default";
	data-pin-config = "sdo-in,sdi-out";
};

&lpspi2 {
	pinctrl-0 = <&lpspi2_default>;
	pinctrl-names = "default";
	data-pin-config = "sdo-in,sdi-out";
};

&lpspi3 {
	pinctrl-0 = <&lpspi3_default>;
	pinctrl-names = "default";
	data-pin-config = "sdo-in,sdi-out";
	status = "okay";

	fs26_wdt: watchdog@0 {
		compatible = "nxp,fs26-wdog";
		reg = <0>;
		spi-max-frequency = <DT_FREQ_M(5)>;
		type = "challenger";
		int-gpios = <&gpioa_h 2 GPIO_ACTIVE_LOW>;
		status = "okay";
	};
};

&lpspi4 {
	pinctrl-0 = <&lpspi4_default>;
	pinctrl-names = "default";
	data-pin-config = "sdo-in,sdi-out";
};

&lpspi5 {
	pinctrl-0 = <&lpspi5_default>;
	pinctrl-names = "default";
	data-pin-config = "sdo-in,sdi-out";
};

&emac0 {
	pinctrl-0 = <&emac0_default>;
	pinctrl-names = "default";
	phy-connection-type = "rmii";
	local-mac-address = [02 04 9f aa bb cc];
	status = "okay";

	fixed-link {
		speed = <100>;
		full-duplex;
	};
};

&emios0 {
	clock-divider = <200>;
	status = "okay";

	master_bus {
		/*
		 * Timebase for PWM led, setting clock 50KHz for internal counter,
		 * default period is 1000 cycles <-> 20ms.
		 */
		emios0_bus_a {
			mode = "MCB_UP_COUNTER";
			prescaler = <16>;
			period = <1000>;
			status = "okay";
		};
	};

	emios0_pwm: pwm {
		pinctrl-0 = <&emios0_default>;
		pinctrl-names = "default";
		status = "okay";

		/* Default clock for internal counter for PWM channel 0-7 is 100Khz */
		pwm_0 {
			channel = <0>;
			pwm-mode = "OPWFMB";
			period = <65535>;
			duty-cycle = <0>;
			prescaler = <8>;
			polarity = "ACTIVE_HIGH";
		};

		pwm_1 {
			channel = <1>;
			pwm-mode = "OPWFMB";
			period = <65535>;
			duty-cycle = <0>;
			prescaler = <8>;
			polarity = "ACTIVE_HIGH";
		};

		pwm_2 {
			channel = <2>;
			pwm-mode = "OPWFMB";
			period = <65535>;
			duty-cycle = <0>;
			prescaler = <8>;
			polarity = "ACTIVE_HIGH";
		};

		pwm_3 {
			channel = <3>;
			pwm-mode = "OPWFMB";
			period = <65535>;
			duty-cycle = <0>;
			prescaler = <8>;
			polarity = "ACTIVE_HIGH";
		};

		pwm_4 {
			channel = <4>;
			pwm-mode = "OPWFMB";
			period = <65535>;
			duty-cycle = <0>;
			prescaler = <8>;
			polarity = "ACTIVE_HIGH";
		};

		pwm_5 {
			channel = <5>;
			pwm-mode = "OPWFMB";
			period = <65535>;
			duty-cycle = <0>;
			prescaler = <8>;
			polarity = "ACTIVE_HIGH";
		};

		pwm_6 {
			channel = <6>;
			pwm-mode = "OPWFMB";
			period = <65535>;
			duty-cycle = <0>;
			prescaler = <8>;
			polarity = "ACTIVE_HIGH";
		};

		pwm_7 {
			channel = <7>;
			pwm-mode = "OPWFMB";
			period = <65535>;
			duty-cycle = <0>;
			prescaler = <8>;
			polarity = "ACTIVE_HIGH";
		};

		rgb_red {
			channel = <19>;
			master-bus = <&emios0_bus_a>;
			duty-cycle = <0>;
			pwm-mode = "OPWMB";
			polarity = "ACTIVE_LOW";
		};
	};
};

&emios1 {
	clock-divider = <200>;
	status = "okay";

	master_bus {
		/*
		 * Timebase for PWM led, setting clock 50KHz for internal counter,
		 * default period is 1000 cycles <-> 20ms.
		 */
		emios1_bus_a {
			prescaler = <16>;
			mode = "MCB_UP_COUNTER";
			period = <1000>;
			status = "okay";
		};

		emios1_bus_f {
			prescaler = <16>;
			mode = "MCB_UP_COUNTER";
			period = <1000>;
			status = "okay";
		};
	};

	emios1_pwm: pwm {
		pinctrl-0 = <&emios1_default>;
		pinctrl-names = "default";
		status = "okay";

		rgb_green {
			channel = <10>;
			master-bus = <&emios1_bus_a>;
			duty-cycle = <0>;
			pwm-mode = "OPWMB";
			polarity = "ACTIVE_LOW";
		};

		rgb_blue {
			channel = <5>;
			master-bus = <&emios1_bus_f>;
			duty-cycle = <0>;
			pwm-mode = "OPWMB";
			polarity = "ACTIVE_LOW";
		};
	};
};

&edma0 {
	status = "okay";
};