/*
 * Copyright (c) 2019,2022 Intel Corporation
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <xtensa/intel/intel_adsp_cavs.dtsi>
#include <mem.h>

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "cdns,tensilica-xtensa-lx6";
			reg = <0>;
			cpu-power-states = <&d3>;
			i-cache-line-size = <64>;
			d-cache-line-size = <64>;
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "cdns,tensilica-xtensa-lx6";
			reg = <1>;
			cpu-power-states = <&d3>;
		};

		power-states {
			/* PM_STATE_SOFT_OFF can be entered only by calling
			 * pm_state_force. The procedure is triggered by IPC
			 * from the HOST (SET_DX).
			 */
			d3: off {
				compatible = "zephyr,power-state";
				power-state-name = "soft-off";
				min-residency-us = <2147483647>;
				exit-latency-us = <0>;
			};
		};
	};

	sram0: memory@be000000 {
		device_type = "memory";
		compatible = "mmio-sram";
		reg = <0xbe000000 DT_SIZE_K(1920)>;
	};

	sram1: memory@be800000 {
		device_type = "memory";
		compatible = "mmio-sram";
		reg = <0xbe800000 DT_SIZE_K(64)>;
	};

	sysclk: system-clock {
		compatible = "fixed-clock";
		clock-frequency = <38400000>;
		#clock-cells = <0>;
	};

	audioclk: audio-clock {
		compatible = "fixed-clock";
		clock-frequency = <24576000>;
		#clock-cells = <0>;
	};

	pllclk: pll-clock {
		compatible = "fixed-clock";
		clock-frequency = <96000000>;
		#clock-cells = <0>;
	};

	clkctl: clkctl {
		compatible = "intel,adsp-shim-clkctl";
		adsp-clkctl-clk-wovcro = <0>;
		adsp-clkctl-clk-lpro = <1>;
		adsp-clkctl-clk-hpro = <2>;
		adsp-clkctl-freq-enc = <0x1a 0x20000002 0x80000002>;
		adsp-clkctl-freq-mask = <0x10 0x20000000 0x80000000>;
		adsp-clkctl-freq-default = <2>;
		adsp-clkctl-freq-lowest = <0>;
		wovcro-supported;
	};

	IMR1: memory@0xb0000000 {
		compatible = "intel,adsp-imr";
		reg = <0xB0000000 DT_SIZE_M(16)>;
		block-size = <0x1000>;
		zephyr,memory-region = "IMR1";
	};

	soc {
		shim: shim@71f00 {
			compatible = "intel,adsp-shim";
			reg = <0x71f00 0x100>;
		};

		mem_window0: mem_window@71a00 {
			compatible = "intel,adsp-mem-window";
			reg = <0x71a00 0x8>;
			offset = <0x4000>;
			memory = <&sram0>;
			initialize;
			read-only;
		};
		mem_window1: mem_window@71a08 {
			compatible = "intel,adsp-mem-window";
			reg = <0x71a08 0x8>;
			memory = <&sram0>;
		};

		mem_window2: mem_window@71a10 {
			compatible = "intel,adsp-mem-window";
			reg = <0x71a10 0x8>;
			memory = <&sram0>;
		};

		mem_window3: mem_window@71a18 {
			compatible = "intel,adsp-mem-window";
			reg = <0x71a18 0x8>;
			memory = <&sram0>;
			read-only;
		};

		timer: timer {
			compatible = "intel,adsp-timer";
			syscon = <&shim>;
		};

		sspbase: ssp_base@71c00 {
			compatible = "intel,cavs-sspbase";
			reg = <0x71c00 0x100>;
		};

		l2lm: l2lm@71d00 {
			compatible = "intel,cavs-l2lm";
			reg = <0x71d00 0x20>;
		};

		adsp_host_ipc: cavs_host_ipc@71e00 {
			compatible = "intel,adsp-host-ipc";
			reg = <0x71e00 0x30>;
			interrupts = <7 0 0>;
			interrupt-parent = <&cavs_intc0>;
		};

		core_intc: core_intc@0 {
			compatible = "cdns,xtensa-core-intc";
			reg = <0x00 0x400>;
			interrupt-controller;
			#interrupt-cells = <3>;
		};

		cavs_intc0: cavs@78800  {
			compatible = "intel,cavs-intc";
			reg = <0x78800 0x10>;
			interrupt-controller;
			#interrupt-cells = <3>;
			interrupts = <6 0 0>;
			interrupt-parent = <&core_intc>;
		};

		cavs_intc1: cavs@78810  {
			compatible = "intel,cavs-intc";
			reg = <0x78810 0x10>;
			interrupt-controller;
			#interrupt-cells = <3>;
			interrupts = <0xA 0 0>;
			interrupt-parent = <&core_intc>;
		};

		cavs_intc2: cavs@78820  {
			compatible = "intel,cavs-intc";
			reg = <0x78820 0x10>;
			interrupt-controller;
			#interrupt-cells = <3>;
			interrupts = <0XD 0 0>;
			interrupt-parent = <&core_intc>;
		};

		cavs_intc3: cavs@78830  {
			compatible = "intel,cavs-intc";
			reg = <0x78830 0x10>;
			interrupt-controller;
			#interrupt-cells = <3>;
			interrupts = <0x10 0 0>;
			interrupt-parent = <&core_intc>;
		};

		adsp_idc: idc@1200 {
			compatible = "intel,adsp-idc";
			reg = <0x1200 0x80>;
			interrupts = <8 0 0>;
			interrupt-parent = <&cavs_intc0>;
		};

		tlb: tlb@3000 {
			compatible = "intel,adsp-tlb";
			reg = <0x3000 0x1000>;
			paddr-size = <11>;
		};

		dmic0: dmic0@10000 {
			compatible = "intel,dai-dmic";
			reg = <0x10000 0x8000>;
			shim = <0x71E80>;
			fifo = <0x0008>;
			interrupts = <0x08 0 0>;
			interrupt-parent = <&cavs_intc3>;
		};

		dmic1: dmic1@10000 {
			compatible = "intel,dai-dmic";
			reg = <0x10000 0x8000>;
			shim = <0x71E80>;
			fifo = <0x0108>;
			interrupts = <0x09 0 0>;
			interrupt-parent = <&cavs_intc3>;
		};

		/*
		 * FIXME this is modeling individual alh channels/instances
		 * with node labels, which has problems. A better representation
		 * is discussed here:
		 *
		 * https://github.com/zephyrproject-rtos/zephyr/pull/50287#discussion_r974591009
		 */
		alh0: alh0@71000 {
			compatible = "intel,alh-dai";
			reg = <0x00071000 0x00071200>;

			status = "okay";
		};

		alh1: alh1@71000 {
			compatible = "intel,alh-dai";
			reg = <0x00071000 0x00071200>;

			status = "okay";
		};

		ssp0: ssp@77000 {
			compatible = "intel,ssp-dai";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x00077000 0x200
			       0x00078C00 0x008>;
			interrupts = <0x01 0 0>;
			interrupt-parent = <&cavs_intc3>;
			dmas = <&lpgpdma0 2
				&lpgpdma0 3>;
			dma-names = "tx", "rx";

			status = "okay";
		};

		ssp1: ssp@77200 {
			compatible = "intel,ssp-dai";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x00077200 0x200
			       0x00078C00 0x008>;
			interrupts = <0x01 0 0>;
			interrupt-parent = <&cavs_intc3>;
			dmas = <&lpgpdma0 4
				&lpgpdma0 5>;
			dma-names = "tx", "rx";

			status = "okay";
		};

		ssp2: ssp@77400 {
			compatible = "intel,ssp-dai";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x00077400 0x200
			       0x00078C00 0x008>;
			interrupts = <0x02 0 0>;
			interrupt-parent = <&cavs_intc3>;
			dmas = <&lpgpdma0 6
				&lpgpdma0 7>;
			dma-names = "tx", "rx";

			status = "okay";
		};

		ssp3: ssp@77600 {
			compatible = "intel,ssp-dai";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x00077600 0x200
			       0x00078C00 0x008>;
			interrupts = <0x03 0 0>;
			interrupt-parent = <&cavs_intc3>;
			dmas = <&lpgpdma0 8
				&lpgpdma0 9>;
			dma-names = "tx", "rx";

			status = "okay";
		};

		ssp4: ssp@77800 {
			compatible = "intel,ssp-dai";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x00077800 0x200
			       0x00078C00 0x008>;
			interrupts = <0x03 0 0>;
			interrupt-parent = <&cavs_intc3>;
			dmas = <&lpgpdma0 10
				&lpgpdma0 11>;
			dma-names = "tx", "rx";

			status = "okay";
		};

		ssp5: ssp@77a00 {
			compatible = "intel,ssp-dai";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x00077A00 0x200
			       0x00078C00 0x008>;
			interrupts = <0x03 0 0>;
			interrupt-parent = <&cavs_intc3>;
			dmas = <&lpgpdma0 12
				&lpgpdma0 13>;
			dma-names = "tx", "rx";

			status = "okay";
		};
	};

	hdas {
		#address-cells = <1>;
		#size-cells = <0>;

		hda0: hda@0 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <0>;
		};
		hda1: hda@1 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <1>;
		};
		hda2: hda@2 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <2>;
		};
		hda3: hda@3 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <3>;
		};
		hda4: hda@4 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <4>;
		};
		hda5: hda@5 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <5>;
		};
		hda6: hda@6 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <6>;
		};
		hda7: hda@7 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <7>;
		};
		hda8: hda@8 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <8>;
		};
		hda9: hda@9 {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <9>;
		};
		hda10: hda@a {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <0x0a>;
		};
		hda11: hda@b {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <0x0b>;
		};
		hda12: hda@c {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <0x0c>;
		};
		hda13: hda@d {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <0x0d>;
		};
		hda14: hda@e {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <0x0e>;
		};
		hda15: hda@f {
			compatible = "intel,hda-dai";
			status = "okay";
			reg = <0x0f>;
		};
	};
};